erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3136898  bytes 726599208 (726.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4215829  bytes 822769173 (822.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5572341  bytes 878641226 (878.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5572341  bytes 878641226 (878.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3136965  bytes 726614190 (726.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4215917  bytes 822784240 (822.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5572467  bytes 878660372 (878.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5572467  bytes 878660372 (878.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137019  bytes 726627380 (726.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4215996  bytes 822798653 (822.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5572584  bytes 878677798 (878.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5572584  bytes 878677798 (878.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137099  bytes 726645182 (726.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4216100  bytes 822817603 (822.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5572724  bytes 878696703 (878.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5572724  bytes 878696703 (878.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137192  bytes 726664748 (726.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4216218  bytes 822838015 (822.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5572879  bytes 878717701 (878.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5572879  bytes 878717701 (878.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137248  bytes 726678054 (726.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4216295  bytes 822852268 (822.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5572994  bytes 878734999 (878.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5572994  bytes 878734999 (878.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137310  bytes 726692487 (726.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4216379  bytes 822867189 (822.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5573118  bytes 878754041 (878.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5573118  bytes 878754041 (878.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137369  bytes 726705976 (726.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4216458  bytes 822881670 (822.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5573238  bytes 878771685 (878.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5573238  bytes 878771685 (878.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137425  bytes 726719277 (726.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4216536  bytes 822895978 (822.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5573370  bytes 878789921 (878.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5573370  bytes 878789921 (878.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137536  bytes 726742608 (726.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4216672  bytes 822920235 (822.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5573532  bytes 878811508 (878.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5573532  bytes 878811508 (878.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137591  bytes 726755838 (726.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4216745  bytes 822934269 (822.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5573648  bytes 878828882 (878.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5573648  bytes 878828882 (878.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137654  bytes 726770402 (726.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4216830  bytes 822949243 (822.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5573775  bytes 878848126 (878.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5573775  bytes 878848126 (878.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137709  bytes 726783810 (726.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4216910  bytes 822963689 (822.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5573899  bytes 878865962 (878.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5573899  bytes 878865962 (878.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137763  bytes 726797084 (726.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4216989  bytes 822978175 (822.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5574022  bytes 878883714 (878.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5574022  bytes 878883714 (878.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3137915  bytes 726830970 (726.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4217171  bytes 823012551 (823.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5574286  bytes 878922713 (878.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5574286  bytes 878922713 (878.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138031  bytes 726858128 (726.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4217309  bytes 823040191 (823.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5574540  bytes 878963387 (878.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5574540  bytes 878963387 (878.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138092  bytes 726872559 (726.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4217395  bytes 823055240 (823.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5574664  bytes 878982357 (878.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5574664  bytes 878982357 (878.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138148  bytes 726886123 (726.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4217475  bytes 823069796 (823.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5574781  bytes 878999819 (878.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5574781  bytes 878999819 (878.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138351  bytes 726911201 (726.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4217865  bytes 823516991 (823.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5574988  bytes 879435595 (879.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5574988  bytes 879435595 (879.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138469  bytes 726935100 (726.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218005  bytes 823541584 (823.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5575149  bytes 879457149 (879.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5575149  bytes 879457149 (879.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138534  bytes 726948997 (726.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218084  bytes 823555985 (823.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5575270  bytes 879474783 (879.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5575270  bytes 879474783 (879.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138596  bytes 726963330 (726.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218168  bytes 823570842 (823.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5575389  bytes 879493529 (879.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5575389  bytes 879493529 (879.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138657  bytes 726977015 (726.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218247  bytes 823585267 (823.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5575512  bytes 879511365 (879.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5575512  bytes 879511365 (879.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138712  bytes 726990427 (726.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218330  bytes 823600021 (823.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5575641  bytes 879529430 (879.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5575641  bytes 879529430 (879.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138795  bytes 727009094 (727.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218441  bytes 823619725 (823.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5575785  bytes 879549827 (879.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5575785  bytes 879549827 (879.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138878  bytes 727027032 (727.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218543  bytes 823638664 (823.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5575915  bytes 879568141 (879.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5575915  bytes 879568141 (879.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138938  bytes 727041404 (727.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218627  bytes 823653552 (823.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5576035  bytes 879586939 (879.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5576035  bytes 879586939 (879.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3138988  bytes 727054422 (727.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218699  bytes 823667424 (823.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5576147  bytes 879604009 (879.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5576147  bytes 879604009 (879.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139048  bytes 727068134 (727.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218786  bytes 823682460 (823.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5576284  bytes 879622714 (879.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5576284  bytes 879622714 (879.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139134  bytes 727087041 (727.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218894  bytes 823701810 (823.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5576419  bytes 879642662 (879.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5576419  bytes 879642662 (879.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139205  bytes 727103906 (727.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4218977  bytes 823716865 (823.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5576505  bytes 879652904 (879.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5576505  bytes 879652904 (879.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139249  bytes 727114017 (727.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219040  bytes 823726941 (823.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5576576  bytes 879663383 (879.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5576576  bytes 879663383 (879.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139286  bytes 727122655 (727.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219093  bytes 823736208 (823.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5576639  bytes 879672154 (879.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5576639  bytes 879672154 (879.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139324  bytes 727131349 (727.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219152  bytes 823745911 (823.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5576722  bytes 879682270 (879.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5576722  bytes 879682270 (879.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139389  bytes 727145632 (727.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219237  bytes 823760408 (823.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5576808  bytes 879693807 (879.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5576808  bytes 879693807 (879.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139477  bytes 727164043 (727.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219344  bytes 823779839 (823.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5576943  bytes 879712396 (879.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5576943  bytes 879712396 (879.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139542  bytes 727178731 (727.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219432  bytes 823795057 (823.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5577067  bytes 879731426 (879.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5577067  bytes 879731426 (879.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139597  bytes 727192025 (727.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219508  bytes 823809327 (823.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5577178  bytes 879748516 (879.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5577178  bytes 879748516 (879.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139655  bytes 727205434 (727.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219588  bytes 823823928 (823.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5577302  bytes 879766382 (879.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5577302  bytes 879766382 (879.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139732  bytes 727223749 (727.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219694  bytes 823843104 (823.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5577442  bytes 879786556 (879.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5577442  bytes 879786556 (879.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139811  bytes 727241383 (727.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219795  bytes 823862031 (823.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5577574  bytes 879804989 (879.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5577574  bytes 879804989 (879.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139877  bytes 727256000 (727.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219883  bytes 823877190 (823.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5577697  bytes 879823967 (879.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5577697  bytes 879823967 (879.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139931  bytes 727269265 (727.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4219963  bytes 823891675 (823.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5577810  bytes 879841161 (879.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5577810  bytes 879841161 (879.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3139990  bytes 727282714 (727.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4220044  bytes 823906238 (823.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5577923  bytes 879858437 (879.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5577923  bytes 879858437 (879.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140077  bytes 727301772 (727.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4220161  bytes 823926299 (823.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5578065  bytes 879878753 (879.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5578065  bytes 879878753 (879.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140161  bytes 727319948 (727.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4220265  bytes 823945534 (823.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5578196  bytes 879897098 (879.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5578196  bytes 879897098 (879.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140226  bytes 727334533 (727.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4220356  bytes 823960983 (823.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5578317  bytes 879915984 (879.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5578317  bytes 879915984 (879.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140284  bytes 727348107 (727.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4220437  bytes 823975671 (823.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5578430  bytes 879933202 (879.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5578430  bytes 879933202 (879.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140339  bytes 727361429 (727.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4220513  bytes 823989921 (823.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5578542  bytes 879950380 (879.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5578542  bytes 879950380 (879.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140404  bytes 727376138 (727.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4220602  bytes 824005190 (824.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5578677  bytes 879970237 (879.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5578677  bytes 879970237 (879.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140502  bytes 727398225 (727.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4220730  bytes 824028931 (824.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5578819  bytes 879989370 (879.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5578819  bytes 879989370 (879.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140572  bytes 727413177 (727.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4220819  bytes 824044235 (824.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5578934  bytes 880007944 (880.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5578934  bytes 880007944 (880.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140629  bytes 727426547 (727.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4220902  bytes 824058991 (824.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5579046  bytes 880025110 (880.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5579046  bytes 880025110 (880.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140684  bytes 727439924 (727.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4220982  bytes 824073572 (824.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5579158  bytes 880042314 (880.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5579158  bytes 880042314 (880.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140752  bytes 727454995 (727.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4221074  bytes 824089113 (824.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5579300  bytes 880062554 (880.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5579300  bytes 880062554 (880.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140849  bytes 727476747 (727.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4221200  bytes 824112567 (824.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5579440  bytes 880081536 (880.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5579440  bytes 880081536 (880.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140912  bytes 727491240 (727.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4221284  bytes 824127470 (824.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5579563  bytes 880100490 (880.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5579563  bytes 880100490 (880.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3140967  bytes 727504725 (727.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4221364  bytes 824142027 (824.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5579679  bytes 880117900 (880.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5579679  bytes 880117900 (880.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141025  bytes 727518194 (727.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4221444  bytes 824156572 (824.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5579791  bytes 880135088 (880.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5579791  bytes 880135088 (880.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141097  bytes 727533318 (727.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4221538  bytes 824172218 (824.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5579930  bytes 880155101 (880.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5579930  bytes 880155101 (880.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/04/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141209  bytes 727559634 (727.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4221679  bytes 824197459 (824.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5580083  bytes 880174925 (880.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5580083  bytes 880174925 (880.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141277  bytes 727574379 (727.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4221765  bytes 824212474 (824.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5580202  bytes 880193671 (880.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5580202  bytes 880193671 (880.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141331  bytes 727587629 (727.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4221842  bytes 824226782 (824.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5580316  bytes 880210941 (880.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5580316  bytes 880210941 (880.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141389  bytes 727601063 (727.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4221916  bytes 824240884 (824.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5580429  bytes 880228171 (880.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5580429  bytes 880228171 (880.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141453  bytes 727615644 (727.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4222005  bytes 824256185 (824.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5580560  bytes 880247722 (880.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5580560  bytes 880247722 (880.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141530  bytes 727633401 (727.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4222112  bytes 824275559 (824.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5580695  bytes 880266355 (880.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5580695  bytes 880266355 (880.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141619  bytes 727652431 (727.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4222219  bytes 824294861 (824.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5580828  bytes 880286041 (880.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5580828  bytes 880286041 (880.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141673  bytes 727665673 (727.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4222293  bytes 824308988 (824.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5580937  bytes 880302873 (880.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5580937  bytes 880302873 (880.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141732  bytes 727679250 (727.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4222375  bytes 824323683 (824.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5581052  bytes 880320231 (880.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5581052  bytes 880320231 (880.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141796  bytes 727693955 (727.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4222469  bytes 824339247 (824.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5581200  bytes 880340887 (880.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5581200  bytes 880340887 (880.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141869  bytes 727711319 (727.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4222567  bytes 824357783 (824.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5581323  bytes 880358795 (880.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5581323  bytes 880358795 (880.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3141957  bytes 727730292 (727.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4222675  bytes 824377350 (824.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5581467  bytes 880378937 (880.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5581467  bytes 880378937 (880.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142014  bytes 727743698 (727.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4222754  bytes 824391815 (824.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5581583  bytes 880396287 (880.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5581583  bytes 880396287 (880.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142068  bytes 727756955 (727.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4222831  bytes 824406111 (824.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5581700  bytes 880413677 (880.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5581700  bytes 880413677 (880.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142133  bytes 727771820 (727.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4222923  bytes 824421655 (824.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5581855  bytes 880434734 (880.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5581855  bytes 880434734 (880.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142207  bytes 727789250 (727.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4223023  bytes 824440361 (824.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5581973  bytes 880452274 (880.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5581973  bytes 880452274 (880.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142295  bytes 727808503 (727.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4223131  bytes 824460230 (824.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5582112  bytes 880472275 (880.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5582112  bytes 880472275 (880.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142348  bytes 727821745 (727.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4223207  bytes 824474461 (824.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5582226  bytes 880489557 (880.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5582226  bytes 880489557 (880.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142403  bytes 727835023 (727.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4223286  bytes 824488886 (824.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5582346  bytes 880507139 (880.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5582346  bytes 880507139 (880.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142470  bytes 727849756 (727.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4223375  bytes 824504156 (824.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5582475  bytes 880526583 (880.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5582475  bytes 880526583 (880.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142542  bytes 727866994 (727.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4223473  bytes 824522698 (824.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5582614  bytes 880545363 (880.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5582614  bytes 880545363 (880.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142630  bytes 727886192 (727.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4223584  bytes 824542600 (824.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5582764  bytes 880565960 (880.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5582764  bytes 880565960 (880.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142689  bytes 727899653 (727.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4223660  bytes 824556798 (824.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5582874  bytes 880582998 (880.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5582874  bytes 880582998 (880.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142743  bytes 727912879 (727.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4223740  bytes 824571333 (824.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5583001  bytes 880600944 (880.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5583001  bytes 880600944 (880.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142802  bytes 727927180 (727.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4223823  bytes 824586183 (824.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5583131  bytes 880620430 (880.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5583131  bytes 880620430 (880.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142878  bytes 727944620 (727.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4223923  bytes 824604843 (824.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5583265  bytes 880638960 (880.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5583265  bytes 880638960 (880.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3142965  bytes 727963485 (727.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4224035  bytes 824624682 (824.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5583409  bytes 880659245 (880.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5583409  bytes 880659245 (880.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143021  bytes 727976851 (727.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4224113  bytes 824639065 (824.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5583531  bytes 880676943 (880.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5583531  bytes 880676943 (880.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143077  bytes 727990236 (727.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4224191  bytes 824653503 (824.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5583651  bytes 880694501 (880.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5583651  bytes 880694501 (880.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143142  bytes 728005097 (728.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4224280  bytes 824668769 (824.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5583785  bytes 880714251 (880.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5583785  bytes 880714251 (880.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143203  bytes 728021907 (728.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4224367  bytes 824684413 (824.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5583930  bytes 880733398 (880.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5583930  bytes 880733398 (880.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143309  bytes 728045349 (728.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4224500  bytes 824708471 (824.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5584082  bytes 880754228 (880.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5584082  bytes 880754228 (880.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143366  bytes 728058707 (728.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4224576  bytes 824722653 (824.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5584199  bytes 880771654 (880.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5584199  bytes 880771654 (880.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143419  bytes 728071937 (728.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4224655  bytes 824737085 (824.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5584316  bytes 880789092 (880.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5584316  bytes 880789092 (880.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143480  bytes 728086322 (728.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4224738  bytes 824751871 (824.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5584444  bytes 880808506 (880.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5584444  bytes 880808506 (880.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143533  bytes 728099480 (728.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4224816  bytes 824766169 (824.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5584574  bytes 880826646 (880.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5584574  bytes 880826646 (880.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143639  bytes 728122554 (728.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4224946  bytes 824790136 (824.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5584728  bytes 880847622 (880.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5584728  bytes 880847622 (880.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143698  bytes 728136183 (728.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225024  bytes 824804498 (824.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5584849  bytes 880865256 (880.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5584849  bytes 880865256 (880.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143751  bytes 728149285 (728.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225097  bytes 824818675 (824.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5584965  bytes 880882570 (880.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5584965  bytes 880882570 (880.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143816  bytes 728164042 (728.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225187  bytes 824833995 (824.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5585103  bytes 880902544 (880.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5585103  bytes 880902544 (880.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143867  bytes 728177120 (728.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225265  bytes 824848326 (824.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5585224  bytes 880920216 (880.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5585224  bytes 880920216 (880.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3143968  bytes 728199807 (728.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225393  bytes 824872030 (824.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5585377  bytes 880941114 (880.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5585377  bytes 880941114 (880.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144025  bytes 728213205 (728.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225469  bytes 824886297 (824.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5585492  bytes 880958448 (880.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5585492  bytes 880958448 (880.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144080  bytes 728226454 (728.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225545  bytes 824900539 (824.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5585608  bytes 880975786 (880.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5585608  bytes 880975786 (880.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144141  bytes 728240972 (728.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225627  bytes 824915336 (824.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5585728  bytes 880994572 (880.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5585728  bytes 880994572 (880.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144194  bytes 728254277 (728.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225712  bytes 824930212 (824.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5585866  bytes 881013295 (881.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5585866  bytes 881013295 (881.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144280  bytes 728273222 (728.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225825  bytes 824950073 (824.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5586013  bytes 881033776 (881.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5586013  bytes 881033776 (881.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144342  bytes 728286338 (728.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225898  bytes 824963639 (824.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5586091  bytes 881043555 (881.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5586091  bytes 881043555 (881.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144400  bytes 728299828 (728.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4225974  bytes 824977870 (824.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5586212  bytes 881061071 (881.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5586212  bytes 881061071 (881.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144460  bytes 728314185 (728.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4226061  bytes 824992976 (824.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5586346  bytes 881080797 (881.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5586346  bytes 881080797 (881.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144511  bytes 728327091 (728.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4226142  bytes 825007493 (825.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5586477  bytes 881099084 (881.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5586477  bytes 881099084 (881.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144593  bytes 728345855 (728.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4226250  bytes 825026887 (825.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5586621  bytes 881119422 (881.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5586621  bytes 881119422 (881.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144674  bytes 728363758 (728.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4226346  bytes 825045547 (825.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5586749  bytes 881137455 (881.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5586749  bytes 881137455 (881.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144732  bytes 728377263 (728.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4226422  bytes 825059729 (825.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5586865  bytes 881154769 (881.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5586865  bytes 881154769 (881.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144797  bytes 728392058 (728.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4226513  bytes 825075217 (825.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5587004  bytes 881174779 (881.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5587004  bytes 881174779 (881.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144853  bytes 728405423 (728.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4226593  bytes 825089819 (825.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5587128  bytes 881192609 (881.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5587128  bytes 881192609 (881.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3144932  bytes 728423814 (728.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4226695  bytes 825108788 (825.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5587265  bytes 881212461 (881.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5587265  bytes 881212461 (881.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145008  bytes 728441332 (728.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4226793  bytes 825127478 (825.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5587398  bytes 881230970 (881.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5587398  bytes 881230970 (881.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145067  bytes 728454818 (728.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4226872  bytes 825141875 (825.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5587514  bytes 881248320 (881.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5587514  bytes 881248320 (881.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145137  bytes 728469863 (728.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4226966  bytes 825157475 (825.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5587647  bytes 881267960 (881.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5587647  bytes 881267960 (881.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145199  bytes 728486745 (728.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4227053  bytes 825173087 (825.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5587769  bytes 881285764 (881.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5587769  bytes 881285764 (881.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145282  bytes 728505741 (728.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4227164  bytes 825192644 (825.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5587914  bytes 881306070 (881.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5587914  bytes 881306070 (881.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145365  bytes 728523708 (728.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4227268  bytes 825211802 (825.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5588049  bytes 881324693 (881.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5588049  bytes 881324693 (881.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145420  bytes 728536998 (728.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4227347  bytes 825226226 (825.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5588171  bytes 881342391 (881.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5588171  bytes 881342391 (881.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145480  bytes 728551399 (728.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4227432  bytes 825241163 (825.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5588295  bytes 881361539 (881.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5588295  bytes 881361539 (881.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145534  bytes 728564577 (728.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4227505  bytes 825255207 (825.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5588402  bytes 881378445 (881.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5588402  bytes 881378445 (881.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145614  bytes 728583106 (728.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4227615  bytes 825274714 (825.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5588546  bytes 881398798 (881.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5588546  bytes 881398798 (881.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145693  bytes 728600869 (728.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4227716  bytes 825293715 (825.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5588674  bytes 881416986 (881.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5588674  bytes 881416986 (881.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145750  bytes 728614175 (728.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4227794  bytes 825308134 (825.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5588786  bytes 881434116 (881.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5588786  bytes 881434116 (881.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145817  bytes 728629072 (728.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4227882  bytes 825323370 (825.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5588914  bytes 881453566 (881.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5588914  bytes 881453566 (881.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145872  bytes 728642349 (728.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4227960  bytes 825337772 (825.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589028  bytes 881470874 (881.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589028  bytes 881470874 (881.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145937  bytes 728657098 (728.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228053  bytes 825353326 (825.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589188  bytes 881492601 (881.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589188  bytes 881492601 (881.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3145992  bytes 728669700 (728.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228132  bytes 825367333 (825.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589230  bytes 881495509 (881.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589230  bytes 881495509 (881.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146010  bytes 728674240 (728.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228161  bytes 825371768 (825.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589248  bytes 881496789 (881.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589248  bytes 881496789 (881.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146039  bytes 728680328 (728.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228202  bytes 825377157 (825.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589280  bytes 881500213 (881.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589280  bytes 881500213 (881.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146058  bytes 728684908 (728.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228232  bytes 825381634 (825.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589298  bytes 881501505 (881.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589298  bytes 881501505 (881.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146084  bytes 728690583 (728.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228271  bytes 825386830 (825.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589333  bytes 881504947 (881.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589333  bytes 881504947 (881.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146146  bytes 728703869 (728.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228355  bytes 825401395 (825.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589378  bytes 881507991 (881.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589378  bytes 881507991 (881.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146211  bytes 728717756 (728.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228435  bytes 825415931 (825.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589494  bytes 881525447 (881.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589494  bytes 881525447 (881.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146278  bytes 728732539 (728.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228523  bytes 825431037 (825.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589628  bytes 881545115 (881.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589628  bytes 881545115 (881.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146336  bytes 728746310 (728.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228602  bytes 825445503 (825.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589741  bytes 881562309 (881.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589741  bytes 881562309 (881.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146398  bytes 728760609 (728.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228691  bytes 825460719 (825.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5589875  bytes 881581890 (881.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5589875  bytes 881581890 (881.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146497  bytes 728782610 (728.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228813  bytes 825483975 (825.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5590015  bytes 881600935 (881.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5590015  bytes 881600935 (881.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146552  bytes 728795926 (728.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228890  bytes 825498250 (825.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5590129  bytes 881618217 (881.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5590129  bytes 881618217 (881.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146616  bytes 728810558 (728.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4228976  bytes 825513313 (825.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5590257  bytes 881637597 (881.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5590257  bytes 881637597 (881.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146670  bytes 728823858 (728.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4229052  bytes 825527606 (825.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5590368  bytes 881654533 (881.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5590368  bytes 881654533 (881.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146732  bytes 728838364 (728.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4229144  bytes 825543123 (825.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5590516  bytes 881675101 (881.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5590516  bytes 881675101 (881.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146829  bytes 728860069 (728.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4229268  bytes 825566423 (825.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5590662  bytes 881694395 (881.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5590662  bytes 881694395 (881.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146886  bytes 728873393 (728.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4229340  bytes 825580484 (825.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5590773  bytes 881711449 (881.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5590773  bytes 881711449 (881.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3146952  bytes 728888152 (728.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4229428  bytes 825595658 (825.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5590898  bytes 881730613 (881.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5590898  bytes 881730613 (881.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147012  bytes 728905273 (728.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4229515  bytes 825611411 (825.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5591020  bytes 881748443 (881.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5591020  bytes 881748443 (881.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147075  bytes 728919836 (728.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4229607  bytes 825626804 (825.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5591166  bytes 881768846 (881.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5591166  bytes 881768846 (881.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147149  bytes 728937268 (728.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4229706  bytes 825645585 (825.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5591293  bytes 881786894 (881.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5591293  bytes 881786894 (881.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147206  bytes 728950169 (728.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4229780  bytes 825659213 (825.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5591366  bytes 881796459 (881.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5591366  bytes 881796459 (881.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147267  bytes 728964682 (728.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4229865  bytes 825674150 (825.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5591498  bytes 881816141 (881.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5591498  bytes 881816141 (881.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147318  bytes 728977733 (728.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4229943  bytes 825688477 (825.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5591615  bytes 881833507 (881.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5591615  bytes 881833507 (881.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147381  bytes 728992200 (728.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4230030  bytes 825703589 (825.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5591746  bytes 881852952 (881.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5591746  bytes 881852952 (881.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147454  bytes 729009593 (729.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4230131  bytes 825722292 (825.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5591878  bytes 881871364 (881.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5591878  bytes 881871364 (881.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147538  bytes 729027722 (729.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4230235  bytes 825741509 (825.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5592015  bytes 881890020 (881.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5592015  bytes 881890020 (881.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147607  bytes 729042606 (729.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4230325  bytes 825756852 (825.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5592146  bytes 881909592 (881.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5592146  bytes 881909592 (881.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147662  bytes 729055826 (729.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4230403  bytes 825771189 (825.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5592255  bytes 881926602 (881.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5592255  bytes 881926602 (881.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147721  bytes 729069993 (729.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4230485  bytes 825785951 (825.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5592374  bytes 881945348 (881.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5592374  bytes 881945348 (881.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147797  bytes 729087459 (729.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4230588  bytes 825804875 (825.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5592507  bytes 881963850 (881.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5592507  bytes 881963850 (881.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147881  bytes 729105470 (729.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4230691  bytes 825823992 (825.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5592636  bytes 881982091 (881.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5592636  bytes 881982091 (881.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3147945  bytes 729120017 (729.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4230779  bytes 825839150 (825.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5592758  bytes 882001135 (882.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5592758  bytes 882001135 (882.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148003  bytes 729133675 (729.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4230859  bytes 825853709 (825.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5592875  bytes 882018659 (882.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5592875  bytes 882018659 (882.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148062  bytes 729147922 (729.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4230943  bytes 825868647 (825.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5592993  bytes 882037353 (882.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5592993  bytes 882037353 (882.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148141  bytes 729165686 (729.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4231046  bytes 825887577 (825.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5593127  bytes 882055945 (882.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5593127  bytes 882055945 (882.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148225  bytes 729183815 (729.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4231149  bytes 825906712 (825.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5593261  bytes 882074479 (882.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5593261  bytes 882074479 (882.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148288  bytes 729198375 (729.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4231233  bytes 825921643 (825.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5593382  bytes 882093529 (882.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5593382  bytes 882093529 (882.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148344  bytes 729211787 (729.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4231315  bytes 825936292 (825.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5593493  bytes 882110655 (882.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5593493  bytes 882110655 (882.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148405  bytes 729226245 (729.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4231400  bytes 825951295 (825.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5593614  bytes 882129529 (882.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5593614  bytes 882129529 (882.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148459  bytes 729239453 (729.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4231480  bytes 825965836 (825.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5593737  bytes 882147297 (882.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5593737  bytes 882147297 (882.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148562  bytes 729261883 (729.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4231607  bytes 825989391 (825.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5593874  bytes 882166144 (882.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5593874  bytes 882166144 (882.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148634  bytes 729276984 (729.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4231700  bytes 826004961 (826.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5594006  bytes 882185790 (882.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5594006  bytes 882185790 (882.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148687  bytes 729290152 (729.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4231777  bytes 826019236 (826.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5594122  bytes 882203176 (882.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5594122  bytes 882203176 (882.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148751  bytes 729304727 (729.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4231862  bytes 826034236 (826.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5594247  bytes 882222258 (882.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5594247  bytes 882222258 (882.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148803  bytes 729317839 (729.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4231940  bytes 826048645 (826.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5594367  bytes 882239855 (882.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5594367  bytes 882239855 (882.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148903  bytes 729339733 (729.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4232062  bytes 826071862 (826.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5594509  bytes 882258977 (882.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5594509  bytes 882258977 (882.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3148966  bytes 729354311 (729.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4232148  bytes 826086915 (826.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5594632  bytes 882278097 (882.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5594632  bytes 882278097 (882.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149030  bytes 729371656 (729.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4232239  bytes 826102908 (826.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5594753  bytes 882295875 (882.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5594753  bytes 882295875 (882.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149093  bytes 729386095 (729.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4232324  bytes 826117843 (826.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5594872  bytes 882314681 (882.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5594872  bytes 882314681 (882.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149145  bytes 729399199 (729.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4232404  bytes 826132347 (826.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5594996  bytes 882332486 (882.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5594996  bytes 882332486 (882.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149240  bytes 729420921 (729.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4232526  bytes 826155639 (826.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5595132  bytes 882351323 (882.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5595132  bytes 882351323 (882.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149313  bytes 729436140 (729.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4232617  bytes 826171022 (826.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5595265  bytes 882371045 (882.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5595265  bytes 882371045 (882.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149367  bytes 729449372 (729.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4232691  bytes 826185078 (826.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5595378  bytes 882388239 (882.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5595378  bytes 882388239 (882.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149425  bytes 729463655 (729.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4232774  bytes 826199918 (826.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5595494  bytes 882406711 (882.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5595494  bytes 882406711 (882.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149478  bytes 729476902 (729.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4232856  bytes 826214622 (826.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5595618  bytes 882424694 (882.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5595618  bytes 882424694 (882.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149583  bytes 729499312 (729.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4232982  bytes 826238291 (826.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5595756  bytes 882443573 (882.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5595756  bytes 882443573 (882.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149649  bytes 729514100 (729.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4233064  bytes 826253130 (826.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5595877  bytes 882462505 (882.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5595877  bytes 882462505 (882.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149706  bytes 729527496 (729.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4233142  bytes 826267491 (826.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5595994  bytes 882479931 (882.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5595994  bytes 882479931 (882.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149765  bytes 729541699 (729.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4233227  bytes 826282495 (826.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5596114  bytes 882498729 (882.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5596114  bytes 882498729 (882.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149822  bytes 729555079 (729.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4233308  bytes 826297082 (826.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5596241  bytes 882516903 (882.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5596241  bytes 882516903 (882.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149901  bytes 729572749 (729.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4233410  bytes 826316136 (826.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5596363  bytes 882534620 (882.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5596363  bytes 882534620 (882.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3149970  bytes 729587148 (729.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4233498  bytes 826330849 (826.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5596456  bytes 882546567 (882.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5596456  bytes 882546567 (882.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150028  bytes 729600624 (729.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4233576  bytes 826345214 (826.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5596572  bytes 882563977 (882.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5596572  bytes 882563977 (882.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150091  bytes 729615157 (729.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4233663  bytes 826360352 (826.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5596689  bytes 882582681 (882.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5596689  bytes 882582681 (882.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150142  bytes 729628185 (729.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4233739  bytes 826374605 (826.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5596812  bytes 882600469 (882.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5596812  bytes 882600469 (882.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150219  bytes 729645817 (729.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4233841  bytes 826393505 (826.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5596940  bytes 882618699 (882.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5596940  bytes 882618699 (882.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150310  bytes 729665123 (729.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4233953  bytes 826413321 (826.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5597085  bytes 882639199 (882.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5597085  bytes 882639199 (882.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150368  bytes 729678762 (729.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4234033  bytes 826427881 (826.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5597202  bytes 882656707 (882.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5597202  bytes 882656707 (882.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150425  bytes 729692941 (729.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4234117  bytes 826442731 (826.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5597325  bytes 882675661 (882.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5597325  bytes 882675661 (882.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150478  bytes 729706160 (729.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4234192  bytes 826456885 (826.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5597437  bytes 882692803 (882.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5597437  bytes 882692803 (882.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150556  bytes 729724029 (729.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4234297  bytes 826475976 (826.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5597572  bytes 882711409 (882.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5597572  bytes 882711409 (882.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150648  bytes 729743914 (729.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4234413  bytes 826496099 (826.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5597715  bytes 882731759 (882.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5597715  bytes 882731759 (882.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150704  bytes 729757278 (729.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4234493  bytes 826510568 (826.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5597834  bytes 882749301 (882.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5597834  bytes 882749301 (882.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150764  bytes 729771585 (729.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4234579  bytes 826525546 (826.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5597957  bytes 882768279 (882.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5597957  bytes 882768279 (882.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150815  bytes 729784661 (729.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4234657  bytes 826539971 (826.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5598067  bytes 882785317 (882.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5598067  bytes 882785317 (882.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150886  bytes 729801927 (729.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4234757  bytes 826558657 (826.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5598204  bytes 882804003 (882.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5598204  bytes 882804003 (882.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3150973  bytes 729820970 (729.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4234866  bytes 826578328 (826.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5598345  bytes 882824331 (882.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5598345  bytes 882824331 (882.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151048  bytes 729842443 (729.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4234965  bytes 826595430 (826.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5598468  bytes 882842257 (882.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5598468  bytes 882842257 (882.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151114  bytes 729857288 (729.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4235053  bytes 826610709 (826.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5598597  bytes 882861645 (882.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5598597  bytes 882861645 (882.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151167  bytes 729870468 (729.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4235130  bytes 826625023 (826.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5598707  bytes 882878683 (882.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5598707  bytes 882878683 (882.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151222  bytes 729883816 (729.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4235207  bytes 826639365 (826.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5598831  bytes 882896539 (882.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5598831  bytes 882896539 (882.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151328  bytes 729907071 (729.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4235340  bytes 826663550 (826.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5598988  bytes 882917916 (882.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5598988  bytes 882917916 (882.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151385  bytes 729920534 (729.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4235418  bytes 826677945 (826.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5599104  bytes 882935312 (882.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5599104  bytes 882935312 (882.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151448  bytes 729935065 (729.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4235504  bytes 826693039 (826.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5599228  bytes 882954378 (882.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5599228  bytes 882954378 (882.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151507  bytes 729948640 (729.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4235581  bytes 826707413 (826.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5599334  bytes 882971208 (882.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5599334  bytes 882971208 (882.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151575  bytes 729966043 (729.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4235673  bytes 826723318 (826.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5599463  bytes 882989379 (882.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5599463  bytes 882989379 (882.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151687  bytes 729989761 (729.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4235814  bytes 826748035 (826.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5599622  bytes 883010791 (883.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5599622  bytes 883010791 (883.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151744  bytes 730003149 (730.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4235891  bytes 826762386 (826.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5599733  bytes 883027881 (883.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5599733  bytes 883027881 (883.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151806  bytes 730017596 (730.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4235978  bytes 826777410 (826.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5599858  bytes 883046923 (883.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5599858  bytes 883046923 (883.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151860  bytes 730030904 (730.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4236057  bytes 826792301 (826.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5599974  bytes 883064297 (883.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5599974  bytes 883064297 (883.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3151913  bytes 730044060 (730.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4236138  bytes 826806880 (826.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5600096  bytes 883081997 (883.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5600096  bytes 883081997 (883.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152020  bytes 730067157 (730.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4236269  bytes 826830812 (826.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5600256  bytes 883103437 (883.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5600256  bytes 883103437 (883.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152088  bytes 730084795 (730.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4236356  bytes 826846450 (826.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5600373  bytes 883120969 (883.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5600373  bytes 883120969 (883.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152149  bytes 730099166 (730.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4236439  bytes 826861294 (826.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5600490  bytes 883139493 (883.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5600490  bytes 883139493 (883.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152204  bytes 730112600 (730.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4236516  bytes 826875615 (826.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5600605  bytes 883156877 (883.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5600605  bytes 883156877 (883.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152257  bytes 730125720 (730.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4236596  bytes 826890100 (826.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5600731  bytes 883174940 (883.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5600731  bytes 883174940 (883.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152372  bytes 730149490 (730.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4236732  bytes 826914551 (826.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5600887  bytes 883196293 (883.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5600887  bytes 883196293 (883.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152428  bytes 730162889 (730.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4236806  bytes 826928711 (826.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5600994  bytes 883213091 (883.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5600994  bytes 883213091 (883.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152491  bytes 730177363 (730.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4236892  bytes 826944448 (826.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5601113  bytes 883231831 (883.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5601113  bytes 883231831 (883.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152550  bytes 730190931 (730.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4236973  bytes 826959075 (826.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5601228  bytes 883249165 (883.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5601228  bytes 883249165 (883.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152616  bytes 730208432 (730.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4237065  bytes 826975079 (826.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5601362  bytes 883267774 (883.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5601362  bytes 883267774 (883.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152700  bytes 730227309 (730.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4237177  bytes 826994894 (826.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5601506  bytes 883288110 (883.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5601506  bytes 883288110 (883.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152779  bytes 730245134 (730.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4237278  bytes 827013765 (827.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5601633  bytes 883306232 (883.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5601633  bytes 883306232 (883.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152840  bytes 730259665 (730.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4237362  bytes 827028615 (827.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5601754  bytes 883325030 (883.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5601754  bytes 883325030 (883.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152897  bytes 730273105 (730.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4237441  bytes 827043042 (827.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5601866  bytes 883342208 (883.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5601866  bytes 883342208 (883.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3152955  bytes 730286733 (730.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4237524  bytes 827057857 (827.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5601987  bytes 883359880 (883.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5601987  bytes 883359880 (883.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153043  bytes 730305719 (730.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4237632  bytes 827077201 (827.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5602125  bytes 883379926 (883.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5602125  bytes 883379926 (883.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153134  bytes 730327311 (730.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4237742  bytes 827097452 (827.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5602263  bytes 883398777 (883.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5602263  bytes 883398777 (883.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153197  bytes 730342128 (730.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4237828  bytes 827112481 (827.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5602388  bytes 883417859 (883.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5602388  bytes 883417859 (883.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153253  bytes 730355578 (730.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4237908  bytes 827126995 (827.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5602505  bytes 883435359 (883.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5602505  bytes 883435359 (883.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153306  bytes 730368778 (730.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4237985  bytes 827141305 (827.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5602618  bytes 883452577 (883.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5602618  bytes 883452577 (883.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153383  bytes 730387334 (730.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4238095  bytes 827160902 (827.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5602765  bytes 883473191 (883.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5602765  bytes 883473191 (883.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153466  bytes 730405340 (730.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4238197  bytes 827179999 (827.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5602894  bytes 883491468 (883.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5602894  bytes 883491468 (883.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153528  bytes 730419706 (730.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4238283  bytes 827195088 (827.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5603017  bytes 883510492 (883.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5603017  bytes 883510492 (883.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153583  bytes 730433034 (730.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4238359  bytes 827209329 (827.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5603131  bytes 883527738 (883.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5603131  bytes 883527738 (883.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153646  bytes 730450289 (730.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4238446  bytes 827224972 (827.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5603249  bytes 883545334 (883.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5603249  bytes 883545334 (883.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153727  bytes 730468972 (730.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4238557  bytes 827244519 (827.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5603399  bytes 883566125 (883.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5603399  bytes 883566125 (883.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153809  bytes 730487065 (730.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4238660  bytes 827263638 (827.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5603526  bytes 883584298 (883.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5603526  bytes 883584298 (883.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153871  bytes 730501408 (730.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4238743  bytes 827278426 (827.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5603647  bytes 883603172 (883.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5603647  bytes 883603172 (883.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153920  bytes 730514244 (730.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4238818  bytes 827292541 (827.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5603758  bytes 883620226 (883.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5603758  bytes 883620226 (883.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3153973  bytes 730527471 (730.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4238897  bytes 827307358 (827.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5603872  bytes 883637508 (883.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5603872  bytes 883637508 (883.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154038  bytes 730542212 (730.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4238987  bytes 827322730 (827.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5604011  bytes 883657573 (883.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5604011  bytes 883657573 (883.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154141  bytes 730567753 (730.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4239122  bytes 827347465 (827.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5604153  bytes 883676749 (883.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5604153  bytes 883676749 (883.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154204  bytes 730582291 (730.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4239209  bytes 827362644 (827.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5604272  bytes 883695531 (883.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5604272  bytes 883695531 (883.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154260  bytes 730595709 (730.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4239288  bytes 827377153 (827.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5604389  bytes 883713019 (883.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5604389  bytes 883713019 (883.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154311  bytes 730608849 (730.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4239362  bytes 827391290 (827.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5604502  bytes 883730249 (883.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5604502  bytes 883730249 (883.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154374  bytes 730623325 (730.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4239451  bytes 827406539 (827.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5604634  bytes 883749875 (883.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5604634  bytes 883749875 (883.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154471  bytes 730645291 (730.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4239577  bytes 827430068 (827.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5604775  bytes 883768972 (883.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5604775  bytes 883768972 (883.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154539  bytes 730660113 (730.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4239664  bytes 827445259 (827.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5604901  bytes 883788164 (883.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5604901  bytes 883788164 (883.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154594  bytes 730673448 (730.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4239743  bytes 827459761 (827.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5605020  bytes 883805740 (883.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5605020  bytes 883805740 (883.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154658  bytes 730690723 (730.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4239832  bytes 827475500 (827.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5605140  bytes 883823440 (883.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5605140  bytes 883823440 (883.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154723  bytes 730705453 (730.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4239926  bytes 827491069 (827.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5605279  bytes 883843406 (883.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5605279  bytes 883843406 (883.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154823  bytes 730727551 (730.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4240051  bytes 827514484 (827.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5605424  bytes 883862672 (883.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5605424  bytes 883862672 (883.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154891  bytes 730742314 (730.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4240136  bytes 827529476 (827.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5605546  bytes 883881610 (883.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5605546  bytes 883881610 (883.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3154950  bytes 730755726 (730.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4240212  bytes 827543681 (827.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5605657  bytes 883898534 (883.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5605657  bytes 883898534 (883.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155003  bytes 730768882 (730.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4240290  bytes 827558038 (827.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5605772  bytes 883915832 (883.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5605772  bytes 883915832 (883.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155067  bytes 730783466 (730.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4240384  bytes 827573629 (827.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5605915  bytes 883936254 (883.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5605915  bytes 883936254 (883.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155176  bytes 730809275 (730.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4240516  bytes 827598118 (827.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5606063  bytes 883955782 (883.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5606063  bytes 883955782 (883.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155242  bytes 730823930 (730.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4240595  bytes 827612709 (827.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5606178  bytes 883974202 (883.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5606178  bytes 883974202 (883.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155299  bytes 730837393 (730.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4240673  bytes 827627112 (827.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5606292  bytes 883991448 (883.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5606292  bytes 883991448 (883.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155355  bytes 730850903 (730.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4240752  bytes 827641632 (827.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5606410  bytes 884008988 (884.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5606410  bytes 884008988 (884.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155420  bytes 730865648 (730.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4240841  bytes 827656857 (827.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5606545  bytes 884028841 (884.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5606545  bytes 884028841 (884.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155494  bytes 730883120 (730.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4240944  bytes 827675938 (827.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5606690  bytes 884047993 (884.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5606690  bytes 884047993 (884.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155560  bytes 730897277 (730.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4241026  bytes 827690201 (827.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5606775  bytes 884059412 (884.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5606775  bytes 884059412 (884.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155616  bytes 730910620 (730.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4241105  bytes 827704639 (827.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5606888  bytes 884076652 (884.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5606888  bytes 884076652 (884.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155682  bytes 730927927 (730.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4241194  bytes 827720366 (827.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5607003  bytes 884094080 (884.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5607003  bytes 884094080 (884.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155749  bytes 730942718 (730.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4241284  bytes 827735660 (827.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5607139  bytes 884113888 (884.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5607139  bytes 884113888 (884.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155825  bytes 730960322 (730.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4241385  bytes 827754482 (827.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5607269  bytes 884132175 (884.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5607269  bytes 884132175 (884.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155917  bytes 730979618 (730.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4241497  bytes 827774372 (827.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5607407  bytes 884152147 (884.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5607407  bytes 884152147 (884.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3155976  bytes 730993094 (730.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4241577  bytes 827788841 (827.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5607524  bytes 884169585 (884.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5607524  bytes 884169585 (884.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156029  bytes 731006285 (731.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4241654  bytes 827803088 (827.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5607634  bytes 884186623 (884.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5607634  bytes 884186623 (884.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156098  bytes 731021169 (731.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4241742  bytes 827818247 (827.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5607762  bytes 884206003 (884.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5607762  bytes 884206003 (884.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156180  bytes 731042136 (731.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4241853  bytes 827838347 (827.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5607911  bytes 884225420 (884.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5607911  bytes 884225420 (884.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156271  bytes 731061597 (731.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4241967  bytes 827858252 (827.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5608052  bytes 884245549 (884.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5608052  bytes 884245549 (884.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156329  bytes 731075088 (731.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4242045  bytes 827872616 (827.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5608169  bytes 884262951 (884.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5608169  bytes 884262951 (884.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156388  bytes 731088614 (731.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4242126  bytes 827887245 (827.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5608280  bytes 884280103 (884.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5608280  bytes 884280103 (884.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156453  bytes 731103266 (731.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4242214  bytes 827902480 (827.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5608408  bytes 884299541 (884.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5608408  bytes 884299541 (884.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156525  bytes 731120450 (731.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4242314  bytes 827921252 (827.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5608543  bytes 884318114 (884.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5608543  bytes 884318114 (884.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156616  bytes 731139663 (731.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4242426  bytes 827941155 (827.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5608692  bytes 884338695 (884.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5608692  bytes 884338695 (884.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156672  bytes 731152994 (731.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4242504  bytes 827955551 (827.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5608807  bytes 884356039 (884.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5608807  bytes 884356039 (884.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156742  bytes 731170632 (731.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4242596  bytes 827971515 (827.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5608931  bytes 884373993 (884.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5608931  bytes 884373993 (884.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156807  bytes 731185284 (731.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4242684  bytes 827986698 (827.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5609063  bytes 884393639 (884.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5609063  bytes 884393639 (884.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156859  bytes 731198407 (731.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4242760  bytes 828000926 (828.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5609187  bytes 884411460 (884.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5609187  bytes 884411460 (884.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3156963  bytes 731221528 (731.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4242892  bytes 828025024 (828.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5609336  bytes 884432170 (884.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5609336  bytes 884432170 (884.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157020  bytes 731234944 (731.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4242968  bytes 828039277 (828.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5609453  bytes 884449596 (884.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5609453  bytes 884449596 (884.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157077  bytes 731248376 (731.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4243044  bytes 828053518 (828.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5609572  bytes 884467102 (884.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5609572  bytes 884467102 (884.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157140  bytes 731262872 (731.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4243128  bytes 828068445 (828.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5609701  bytes 884486510 (884.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5609701  bytes 884486510 (884.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157202  bytes 731279669 (731.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4243218  bytes 828084258 (828.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5609837  bytes 884505069 (884.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5609837  bytes 884505069 (884.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157305  bytes 731302828 (731.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4243349  bytes 828108202 (828.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5609991  bytes 884526056 (884.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5609991  bytes 884526056 (884.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157361  bytes 731316208 (731.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4243425  bytes 828122406 (828.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5610109  bytes 884543510 (884.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5610109  bytes 884543510 (884.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157418  bytes 731329753 (731.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4243504  bytes 828136885 (828.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5610226  bytes 884560998 (884.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5610226  bytes 884560998 (884.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157491  bytes 731344909 (731.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4243588  bytes 828151831 (828.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5610352  bytes 884580132 (884.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5610352  bytes 884580132 (884.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157549  bytes 731358305 (731.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4243669  bytes 828166401 (828.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5610481  bytes 884598298 (884.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5610481  bytes 884598298 (884.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157657  bytes 731381534 (731.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4243801  bytes 828190391 (828.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5610637  bytes 884619401 (884.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5610637  bytes 884619401 (884.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157712  bytes 731394830 (731.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4243877  bytes 828204661 (828.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5610755  bytes 884636891 (884.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5610755  bytes 884636891 (884.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157777  bytes 731412180 (731.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4243963  bytes 828220186 (828.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5610879  bytes 884654679 (884.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5610879  bytes 884654679 (884.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157841  bytes 731426679 (731.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4244052  bytes 828235407 (828.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5611015  bytes 884674509 (884.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5611015  bytes 884674509 (884.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3157900  bytes 731440327 (731.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4244135  bytes 828250139 (828.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5611143  bytes 884692676 (884.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5611143  bytes 884692676 (884.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158011  bytes 731463903 (731.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4244267  bytes 828274221 (828.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5611301  bytes 884713859 (884.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5611301  bytes 884713859 (884.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158063  bytes 731477055 (731.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4244342  bytes 828288381 (828.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5611414  bytes 884730899 (884.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5611414  bytes 884730899 (884.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158114  bytes 731490131 (731.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4244418  bytes 828302587 (828.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5611534  bytes 884748457 (884.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5611534  bytes 884748457 (884.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158180  bytes 731504884 (731.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4244506  bytes 828317808 (828.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5611662  bytes 884767859 (884.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5611662  bytes 884767859 (884.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158243  bytes 731521769 (731.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4244591  bytes 828333288 (828.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5611790  bytes 884785961 (884.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5611790  bytes 884785961 (884.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158322  bytes 731540580 (731.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4244701  bytes 828352840 (828.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5611942  bytes 884806654 (884.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5611942  bytes 884806654 (884.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158383  bytes 731553620 (731.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4244777  bytes 828366678 (828.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5612016  bytes 884816261 (884.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5612016  bytes 884816261 (884.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158438  bytes 731566880 (731.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4244856  bytes 828381146 (828.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5612136  bytes 884833819 (884.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5612136  bytes 884833819 (884.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158503  bytes 731581641 (731.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4244948  bytes 828396631 (828.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5612260  bytes 884853017 (884.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5612260  bytes 884853017 (884.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158556  bytes 731594805 (731.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4245023  bytes 828410707 (828.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5612381  bytes 884870663 (884.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5612381  bytes 884870663 (884.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158639  bytes 731613404 (731.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4245132  bytes 828430183 (828.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5612530  bytes 884891204 (884.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5612530  bytes 884891204 (884.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158721  bytes 731631382 (731.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4245233  bytes 828449192 (828.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5612669  bytes 884909989 (884.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5612669  bytes 884909989 (884.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158787  bytes 731648756 (731.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4245322  bytes 828464959 (828.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5612799  bytes 884928255 (884.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5612799  bytes 884928255 (884.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158852  bytes 731663427 (731.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4245410  bytes 828480118 (828.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5612930  bytes 884947739 (884.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5612930  bytes 884947739 (884.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158906  bytes 731676579 (731.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4245484  bytes 828494232 (828.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5613046  bytes 884965089 (884.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5613046  bytes 884965089 (884.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3158984  bytes 731695043 (731.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4245591  bytes 828513521 (828.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5613193  bytes 884985500 (884.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5613193  bytes 884985500 (884.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159067  bytes 731713038 (731.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4245697  bytes 828532814 (828.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5613327  bytes 885003989 (885.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5613327  bytes 885003989 (885.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159122  bytes 731726338 (731.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4245775  bytes 828547124 (828.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5613442  bytes 885021323 (885.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5613442  bytes 885021323 (885.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159185  bytes 731740862 (731.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4245863  bytes 828562364 (828.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5613575  bytes 885040961 (885.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5613575  bytes 885040961 (885.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159250  bytes 731757871 (731.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4245952  bytes 828578140 (828.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5613704  bytes 885059117 (885.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5613704  bytes 885059117 (885.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159334  bytes 731776826 (731.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4246065  bytes 828597845 (828.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5613851  bytes 885079492 (885.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5613851  bytes 885079492 (885.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159415  bytes 731794670 (731.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4246164  bytes 828616747 (828.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5613984  bytes 885097941 (885.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5613984  bytes 885097941 (885.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159472  bytes 731808110 (731.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4246243  bytes 828631202 (828.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5614108  bytes 885115767 (885.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5614108  bytes 885115767 (885.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159539  bytes 731823037 (731.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4246332  bytes 828646478 (828.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5614242  bytes 885135555 (885.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5614242  bytes 885135555 (885.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159600  bytes 731836808 (731.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4246410  bytes 828660850 (828.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5614366  bytes 885153345 (885.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5614366  bytes 885153345 (885.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159664  bytes 731851339 (731.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4246493  bytes 828675671 (828.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5614500  bytes 885172961 (885.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5614500  bytes 885172961 (885.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159758  bytes 731873029 (731.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4246615  bytes 828698945 (828.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5614642  bytes 885192055 (885.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5614642  bytes 885192055 (885.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159827  bytes 731890582 (731.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4246704  bytes 828714748 (828.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5614768  bytes 885210101 (885.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5614768  bytes 885210101 (885.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159886  bytes 731904929 (731.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4246788  bytes 828729575 (828.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5614899  bytes 885229649 (885.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5614899  bytes 885229649 (885.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159939  bytes 731918097 (731.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4246864  bytes 828743777 (828.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5615018  bytes 885247143 (885.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5615018  bytes 885247143 (885.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3159998  bytes 731932352 (731.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4246950  bytes 828758756 (828.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5615150  bytes 885266640 (885.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5615150  bytes 885266640 (885.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160098  bytes 731954438 (731.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4247078  bytes 828782446 (828.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5615294  bytes 885285831 (885.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5615294  bytes 885285831 (885.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160163  bytes 731968289 (731.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4247162  bytes 828797239 (828.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5615417  bytes 885303569 (885.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5615417  bytes 885303569 (885.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160228  bytes 731983009 (731.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4247249  bytes 828812377 (828.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5615550  bytes 885323221 (885.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5615550  bytes 885323221 (885.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160297  bytes 732000138 (732.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4247332  bytes 828828914 (828.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5615669  bytes 885340679 (885.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5615669  bytes 885340679 (885.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160366  bytes 732015283 (732.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4247429  bytes 828844611 (828.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5615813  bytes 885360978 (885.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5615813  bytes 885360978 (885.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160465  bytes 732037089 (732.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4247551  bytes 828867825 (828.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5615962  bytes 885380428 (885.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5615962  bytes 885380428 (885.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160522  bytes 732050745 (732.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4247626  bytes 828882025 (828.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5616085  bytes 885398166 (885.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5616085  bytes 885398166 (885.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160584  bytes 732065316 (732.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4247712  bytes 828897092 (828.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5616208  bytes 885417108 (885.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5616208  bytes 885417108 (885.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160637  bytes 732078658 (732.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4247789  bytes 828911414 (828.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5616327  bytes 885434712 (885.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5616327  bytes 885434712 (885.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160701  bytes 732093208 (732.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4247881  bytes 828926900 (828.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5616465  bytes 885454663 (885.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5616465  bytes 885454663 (885.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160812  bytes 732115902 (732.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4248004  bytes 828950208 (828.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5616607  bytes 885473658 (885.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5616607  bytes 885473658 (885.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160882  bytes 732133593 (732.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4248092  bytes 828965942 (828.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5616732  bytes 885491618 (885.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5616732  bytes 885491618 (885.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3160948  bytes 732148437 (732.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4248183  bytes 828981376 (828.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5616870  bytes 885511622 (885.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5616870  bytes 885511622 (885.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161005  bytes 732161857 (732.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4248260  bytes 828995652 (828.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5616996  bytes 885529528 (885.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5616996  bytes 885529528 (885.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161072  bytes 732176664 (732.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4248350  bytes 829011528 (829.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5617128  bytes 885549013 (885.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5617128  bytes 885549013 (885.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161148  bytes 732194190 (732.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4248453  bytes 829030569 (829.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5617263  bytes 885567560 (885.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5617263  bytes 885567560 (885.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161225  bytes 732211899 (732.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4248551  bytes 829049233 (829.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5617393  bytes 885585754 (885.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5617393  bytes 885585754 (885.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161289  bytes 732226778 (732.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4248637  bytes 829064308 (829.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5617521  bytes 885605134 (885.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5617521  bytes 885605134 (885.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161352  bytes 732243856 (732.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4248728  bytes 829080224 (829.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5617645  bytes 885623006 (885.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5617645  bytes 885623006 (885.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161423  bytes 732259144 (732.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4248816  bytes 829095366 (829.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5617774  bytes 885642332 (885.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5617774  bytes 885642332 (885.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161503  bytes 732276937 (732.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4248918  bytes 829114239 (829.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5617913  bytes 885661087 (885.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5617913  bytes 885661087 (885.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161588  bytes 732295009 (732.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4249017  bytes 829133053 (829.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5618048  bytes 885679675 (885.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5618048  bytes 885679675 (885.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161656  bytes 732309768 (732.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4249107  bytes 829148419 (829.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5618184  bytes 885699471 (885.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5618184  bytes 885699471 (885.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161711  bytes 732323099 (732.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4249181  bytes 829162507 (829.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5618299  bytes 885716831 (885.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5618299  bytes 885716831 (885.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161776  bytes 732338121 (732.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4249269  bytes 829177881 (829.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5618428  bytes 885736133 (885.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5618428  bytes 885736133 (885.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161855  bytes 732355976 (732.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4249373  bytes 829196849 (829.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5618568  bytes 885755025 (885.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5618568  bytes 885755025 (885.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3161951  bytes 732378197 (732.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4249489  bytes 829217544 (829.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5618714  bytes 885774255 (885.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5618714  bytes 885774255 (885.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162021  bytes 732393264 (732.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4249577  bytes 829232803 (829.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5618851  bytes 885794243 (885.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5618851  bytes 885794243 (885.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162084  bytes 732406963 (732.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4249659  bytes 829247484 (829.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5618970  bytes 885811795 (885.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5618970  bytes 885811795 (885.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162148  bytes 732421482 (732.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4249742  bytes 829262297 (829.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5619098  bytes 885831045 (885.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5619098  bytes 885831045 (885.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162222  bytes 732438840 (732.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4249843  bytes 829280938 (829.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5619237  bytes 885849822 (885.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5619237  bytes 885849822 (885.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162304  bytes 732456768 (732.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4249945  bytes 829300019 (829.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5619379  bytes 885868739 (885.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5619379  bytes 885868739 (885.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162380  bytes 732472255 (732.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4250036  bytes 829315560 (829.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5619511  bytes 885888421 (885.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5619511  bytes 885888421 (885.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162446  bytes 732489383 (732.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4250125  bytes 829331447 (829.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5619632  bytes 885906137 (885.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5619632  bytes 885906137 (885.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162514  bytes 732504496 (732.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4250214  bytes 829346688 (829.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5619755  bytes 885925127 (885.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5619755  bytes 885925127 (885.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162568  bytes 732517756 (732.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4250292  bytes 829361036 (829.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5619886  bytes 885943336 (885.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5619886  bytes 885943336 (885.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162666  bytes 732539543 (732.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4250416  bytes 829384385 (829.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5620030  bytes 885962475 (885.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5620030  bytes 885962475 (885.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162739  bytes 732554586 (732.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4250506  bytes 829399682 (829.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5620159  bytes 885981919 (885.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5620159  bytes 885981919 (885.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162800  bytes 732568441 (732.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4250587  bytes 829414275 (829.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5620281  bytes 885999667 (885.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5620281  bytes 885999667 (885.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162867  bytes 732583036 (732.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4250673  bytes 829429320 (829.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5620409  bytes 886018917 (886.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5620409  bytes 886018917 (886.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3162932  bytes 732597083 (732.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4250763  bytes 829446292 (829.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5620543  bytes 886037301 (886.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5620543  bytes 886037301 (886.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163047  bytes 732624695 (732.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4250900  bytes 829472642 (829.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5620696  bytes 886057127 (886.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5620696  bytes 886057127 (886.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163115  bytes 732639643 (732.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4250989  bytes 829487975 (829.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5620830  bytes 886076831 (886.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5620830  bytes 886076831 (886.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163172  bytes 732653082 (732.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4251065  bytes 829502183 (829.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5620955  bytes 886094719 (886.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5620955  bytes 886094719 (886.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163240  bytes 732667908 (732.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4251149  bytes 829517124 (829.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5621077  bytes 886113513 (886.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5621077  bytes 886113513 (886.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163299  bytes 732681496 (732.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4251232  bytes 829531839 (829.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5621217  bytes 886132364 (886.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5621217  bytes 886132364 (886.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163409  bytes 732704062 (732.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4251357  bytes 829555770 (829.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5621363  bytes 886151658 (886.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5621363  bytes 886151658 (886.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163474  bytes 732718701 (732.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4251436  bytes 829570338 (829.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5621488  bytes 886170762 (886.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5621488  bytes 886170762 (886.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163541  bytes 732736033 (732.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4251524  bytes 829586082 (829.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5621614  bytes 886188798 (886.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5621614  bytes 886188798 (886.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163606  bytes 732751041 (732.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4251612  bytes 829601150 (829.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5621742  bytes 886208012 (886.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5621742  bytes 886208012 (886.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163664  bytes 732764492 (732.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4251695  bytes 829615816 (829.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5621875  bytes 886226386 (886.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5621875  bytes 886226386 (886.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163772  bytes 732787059 (732.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4251822  bytes 829639343 (829.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5622026  bytes 886245846 (886.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5622026  bytes 886245846 (886.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163839  bytes 732801960 (732.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4251911  bytes 829654652 (829.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5622164  bytes 886265780 (886.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5622164  bytes 886265780 (886.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163892  bytes 732815128 (732.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4251984  bytes 829668682 (829.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5622281  bytes 886283182 (886.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5622281  bytes 886283182 (886.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3163960  bytes 732829946 (732.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4252071  bytes 829683829 (829.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5622409  bytes 886302518 (886.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5622409  bytes 886302518 (886.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164021  bytes 732843722 (732.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4252148  bytes 829698156 (829.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5622533  bytes 886320323 (886.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5622533  bytes 886320323 (886.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164110  bytes 732865554 (732.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4252266  bytes 829719245 (829.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5622685  bytes 886339981 (886.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5622685  bytes 886339981 (886.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164206  bytes 732885286 (732.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4252375  bytes 829738905 (829.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5622826  bytes 886360189 (886.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5622826  bytes 886360189 (886.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164266  bytes 732898874 (732.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4252452  bytes 829753184 (829.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5622945  bytes 886377695 (886.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5622945  bytes 886377695 (886.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164338  bytes 732913909 (732.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4252543  bytes 829768584 (829.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5623076  bytes 886397125 (886.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5623076  bytes 886397125 (886.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164401  bytes 732927640 (732.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4252623  bytes 829783060 (829.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5623199  bytes 886414885 (886.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5623199  bytes 886414885 (886.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164487  bytes 732945713 (732.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4252730  bytes 829802231 (829.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5623341  bytes 886433831 (886.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5623341  bytes 886433831 (886.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164582  bytes 732965276 (732.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4252848  bytes 829822706 (829.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5623489  bytes 886454430 (886.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5623489  bytes 886454430 (886.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164640  bytes 732978632 (732.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4252925  bytes 829836937 (829.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5623611  bytes 886472198 (886.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5623611  bytes 886472198 (886.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164717  bytes 732997534 (732.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4253025  bytes 829853607 (829.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5623740  bytes 886491524 (886.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5623740  bytes 886491524 (886.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164772  bytes 733010976 (733.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4253105  bytes 829868202 (829.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5623862  bytes 886509186 (886.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5623862  bytes 886509186 (886.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164853  bytes 733028857 (733.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4253209  bytes 829887251 (829.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5624001  bytes 886527941 (886.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5624001  bytes 886527941 (886.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3164947  bytes 733048375 (733.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4253323  bytes 829907231 (829.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5624156  bytes 886549034 (886.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5624156  bytes 886549034 (886.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165007  bytes 733062203 (733.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4253397  bytes 829921308 (829.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5624270  bytes 886566280 (886.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5624270  bytes 886566280 (886.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165075  bytes 733077017 (733.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4253484  bytes 829936467 (829.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5624396  bytes 886585460 (886.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5624396  bytes 886585460 (886.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165126  bytes 733090101 (733.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4253558  bytes 829950460 (829.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5624513  bytes 886602862 (886.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5624513  bytes 886602862 (886.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165216  bytes 733112030 (733.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4253669  bytes 829970599 (829.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5624666  bytes 886622476 (886.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5624666  bytes 886622476 (886.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165305  bytes 733131249 (733.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4253780  bytes 829990410 (829.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5624818  bytes 886643413 (886.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5624818  bytes 886643413 (886.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165361  bytes 733144644 (733.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4253859  bytes 830004812 (830.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5624937  bytes 886660919 (886.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5624937  bytes 886660919 (886.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165427  bytes 733159491 (733.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4253944  bytes 830019856 (830.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5625061  bytes 886679925 (886.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5625061  bytes 886679925 (886.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165487  bytes 733173106 (733.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4254025  bytes 830034434 (830.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5625181  bytes 886697589 (886.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5625181  bytes 886697589 (886.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165543  bytes 733186549 (733.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4254105  bytes 830048934 (830.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5625311  bytes 886715732 (886.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5625311  bytes 886715732 (886.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165655  bytes 733210080 (733.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4254239  bytes 830073206 (830.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5625473  bytes 886737285 (886.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5625473  bytes 886737285 (886.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165721  bytes 733227293 (733.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4254326  bytes 830088985 (830.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5625603  bytes 886755469 (886.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5625603  bytes 886755469 (886.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165787  bytes 733242518 (733.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4254413  bytes 830104652 (830.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5625732  bytes 886774735 (886.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5625732  bytes 886774735 (886.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165846  bytes 733256145 (733.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4254488  bytes 830118797 (830.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5625848  bytes 886792145 (886.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5625848  bytes 886792145 (886.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3165905  bytes 733269708 (733.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4254572  bytes 830133640 (830.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5625977  bytes 886810209 (886.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5625977  bytes 886810209 (886.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166025  bytes 733293993 (733.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4254710  bytes 830158929 (830.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5626133  bytes 886831429 (886.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5626133  bytes 886831429 (886.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166085  bytes 733307589 (733.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4254788  bytes 830173261 (830.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5626256  bytes 886849179 (886.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5626256  bytes 886849179 (886.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166149  bytes 733322052 (733.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4254866  bytes 830187683 (830.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5626374  bytes 886867719 (886.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5626374  bytes 886867719 (886.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166212  bytes 733335831 (733.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4254948  bytes 830202331 (830.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5626486  bytes 886884947 (886.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5626486  bytes 886884947 (886.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166283  bytes 733353502 (733.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4255045  bytes 830218618 (830.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5626627  bytes 886903932 (886.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5626627  bytes 886903932 (886.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166398  bytes 733377670 (733.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4255183  bytes 830243187 (830.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5626793  bytes 886925769 (886.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5626793  bytes 886925769 (886.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166461  bytes 733391673 (733.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4255262  bytes 830257693 (830.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5626912  bytes 886943181 (886.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5626912  bytes 886943181 (886.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166523  bytes 733406120 (733.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4255344  bytes 830272459 (830.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5627033  bytes 886962031 (886.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5627033  bytes 886962031 (886.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166586  bytes 733420015 (733.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4255429  bytes 830287377 (830.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5627155  bytes 886979717 (886.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5627155  bytes 886979717 (886.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166645  bytes 733433563 (733.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4255511  bytes 830302058 (830.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5627292  bytes 886998434 (886.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5627292  bytes 886998434 (886.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166760  bytes 733457414 (733.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4255649  bytes 830326570 (830.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5627451  bytes 887019735 (887.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5627451  bytes 887019735 (887.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166828  bytes 733474647 (733.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4255737  bytes 830342331 (830.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5627572  bytes 887037511 (887.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5627572  bytes 887037511 (887.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166892  bytes 733489516 (733.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4255823  bytes 830357333 (830.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5627697  bytes 887056569 (887.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5627697  bytes 887056569 (887.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3166949  bytes 733502864 (733.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4255900  bytes 830371512 (830.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5627817  bytes 887074127 (887.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5627817  bytes 887074127 (887.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167010  bytes 733516547 (733.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4255982  bytes 830386132 (830.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5627934  bytes 887091589 (887.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5627934  bytes 887091589 (887.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167100  bytes 733535504 (733.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4256094  bytes 830405887 (830.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5628092  bytes 887112752 (887.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5628092  bytes 887112752 (887.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167179  bytes 733552717 (733.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4256186  bytes 830422908 (830.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5628199  bytes 887128262 (887.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5628199  bytes 887128262 (887.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167249  bytes 733567608 (733.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4256275  bytes 830438120 (830.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5628327  bytes 887147536 (887.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5628327  bytes 887147536 (887.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167309  bytes 733581407 (733.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4256354  bytes 830452602 (830.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5628439  bytes 887164740 (887.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5628439  bytes 887164740 (887.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167381  bytes 733599186 (733.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4256447  bytes 830468637 (830.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5628563  bytes 887182672 (887.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5628563  bytes 887182672 (887.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167467  bytes 733618362 (733.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4256562  bytes 830488593 (830.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5628721  bytes 887203858 (887.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5628721  bytes 887203858 (887.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167551  bytes 733636406 (733.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4256667  bytes 830507795 (830.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5628857  bytes 887222463 (887.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5628857  bytes 887222463 (887.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167620  bytes 733651320 (733.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4256762  bytes 830523514 (830.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5628979  bytes 887241425 (887.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5628979  bytes 887241425 (887.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167677  bytes 733664732 (733.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4256840  bytes 830537867 (830.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5629100  bytes 887259035 (887.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5629100  bytes 887259035 (887.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167736  bytes 733678439 (733.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4256921  bytes 830552525 (830.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5629223  bytes 887276809 (887.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5629223  bytes 887276809 (887.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167825  bytes 733697647 (733.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257033  bytes 830572699 (830.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5629373  bytes 887297621 (887.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5629373  bytes 887297621 (887.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167906  bytes 733715794 (733.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257125  bytes 830588480 (830.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5629470  bytes 887309123 (887.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5629470  bytes 887309123 (887.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167954  bytes 733726778 (733.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257190  bytes 830598839 (830.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5629553  bytes 887320830 (887.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5629553  bytes 887320830 (887.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3167990  bytes 733735898 (733.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257242  bytes 830608147 (830.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5629624  bytes 887330613 (887.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5629624  bytes 887330613 (887.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168033  bytes 733745426 (733.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257294  bytes 830617491 (830.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5629694  bytes 887340344 (887.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5629694  bytes 887340344 (887.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168104  bytes 733760547 (733.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257388  bytes 830633433 (830.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5629803  bytes 887353811 (887.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5629803  bytes 887353811 (887.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168171  bytes 733774503 (733.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257473  bytes 830648314 (830.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5629892  bytes 887364745 (887.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5629892  bytes 887364745 (887.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168222  bytes 733785281 (733.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257536  bytes 830658965 (830.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5629972  bytes 887376296 (887.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5629972  bytes 887376296 (887.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168264  bytes 733794784 (733.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257591  bytes 830669579 (830.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5630043  bytes 887386141 (887.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5630043  bytes 887386141 (887.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168315  bytes 733808231 (733.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257657  bytes 830680476 (830.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5630122  bytes 887396446 (887.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5630122  bytes 887396446 (887.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168364  bytes 733819055 (733.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257726  bytes 830691114 (830.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5630225  bytes 887409390 (887.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5630225  bytes 887409390 (887.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168446  bytes 733837049 (733.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257835  bytes 830710613 (830.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5630321  bytes 887420903 (887.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5630321  bytes 887420903 (887.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168492  bytes 733847480 (733.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257895  bytes 830720603 (830.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5630400  bytes 887432342 (887.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5630400  bytes 887432342 (887.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168535  bytes 733857111 (733.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4257951  bytes 830730211 (830.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5630473  bytes 887442289 (887.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5630473  bytes 887442289 (887.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168574  bytes 733866395 (733.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4258000  bytes 830739334 (830.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5630532  bytes 887451294 (887.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5630532  bytes 887451294 (887.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168635  bytes 733877858 (733.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4258078  bytes 830750691 (830.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5630635  bytes 887464339 (887.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5630635  bytes 887464339 (887.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168726  bytes 733899421 (733.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4258197  bytes 830771558 (830.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5630743  bytes 887476629 (887.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5630743  bytes 887476629 (887.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168800  bytes 733915218 (733.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4258287  bytes 830786924 (830.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5630875  bytes 887496051 (887.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5630875  bytes 887496051 (887.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168856  bytes 733928614 (733.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4258362  bytes 830801047 (830.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5630991  bytes 887513307 (887.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5630991  bytes 887513307 (887.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168913  bytes 733942010 (733.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4258437  bytes 830815230 (830.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5631105  bytes 887530553 (887.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5631105  bytes 887530553 (887.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3168982  bytes 733956881 (733.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4258533  bytes 830830988 (830.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5631254  bytes 887551275 (887.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5631254  bytes 887551275 (887.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169088  bytes 733979622 (733.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4258659  bytes 830854648 (830.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5631398  bytes 887570501 (887.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5631398  bytes 887570501 (887.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169150  bytes 733994485 (733.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4258742  bytes 830869464 (830.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5631521  bytes 887589301 (887.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5631521  bytes 887589301 (887.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169207  bytes 734007876 (734.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4258822  bytes 830883984 (830.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5631635  bytes 887606571 (887.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5631635  bytes 887606571 (887.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169279  bytes 734025570 (734.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4258913  bytes 830899794 (830.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5631759  bytes 887624505 (887.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5631759  bytes 887624505 (887.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169356  bytes 734041347 (734.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4259008  bytes 830916596 (830.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5631904  bytes 887644841 (887.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5631904  bytes 887644841 (887.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169463  bytes 734063801 (734.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4259136  bytes 830940197 (830.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5632062  bytes 887664881 (887.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5632062  bytes 887664881 (887.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169529  bytes 734078452 (734.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4259222  bytes 830955315 (830.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5632194  bytes 887684303 (887.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5632194  bytes 887684303 (887.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169585  bytes 734091720 (734.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4259304  bytes 830969936 (830.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5632314  bytes 887701861 (887.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5632314  bytes 887701861 (887.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169650  bytes 734105871 (734.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4259389  bytes 830984810 (830.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5632443  bytes 887719947 (887.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5632443  bytes 887719947 (887.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169722  bytes 734121494 (734.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4259484  bytes 831000386 (831.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5632572  bytes 887739355 (887.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5632572  bytes 887739355 (887.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169816  bytes 734143386 (734.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4259599  bytes 831021687 (831.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5632731  bytes 887759376 (887.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5632731  bytes 887759376 (887.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169894  bytes 734160213 (734.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4259693  bytes 831037893 (831.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5632827  bytes 887772534 (887.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5632827  bytes 887772534 (887.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3169956  bytes 734174025 (734.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4259776  bytes 831052827 (831.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5632946  bytes 887790040 (887.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5632946  bytes 887790040 (887.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170013  bytes 734187481 (734.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4259852  bytes 831067003 (831.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5633071  bytes 887807894 (887.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5633071  bytes 887807894 (887.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170081  bytes 734202381 (734.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4259939  bytes 831082151 (831.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5633203  bytes 887827482 (887.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5633203  bytes 887827482 (887.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170164  bytes 734220387 (734.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260042  bytes 831101134 (831.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5633346  bytes 887846445 (887.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5633346  bytes 887846445 (887.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170261  bytes 734240749 (734.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260158  bytes 831121630 (831.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5633496  bytes 887867077 (887.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5633496  bytes 887867077 (887.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170317  bytes 734254241 (734.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260234  bytes 831135771 (831.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5633621  bytes 887884895 (887.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5633621  bytes 887884895 (887.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170389  bytes 734272539 (734.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260329  bytes 831152130 (831.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5633752  bytes 887903229 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5633752  bytes 887903229 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170460  bytes 734287683 (734.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260422  bytes 831167683 (831.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5633890  bytes 887923187 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5633890  bytes 887923187 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170532  bytes 734305023 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260526  bytes 831187003 (831.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634034  bytes 887942262 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634034  bytes 887942262 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170582  bytes 734317244 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260590  bytes 831197054 (831.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634078  bytes 887946385 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634078  bytes 887946385 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170599  bytes 734321732 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260619  bytes 831201489 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634096  bytes 887947665 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634096  bytes 887947665 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170616  bytes 734326232 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260648  bytes 831205924 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634114  bytes 887948957 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634114  bytes 887948957 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170645  bytes 734332311 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260688  bytes 831211270 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634148  bytes 887952509 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634148  bytes 887952509 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170689  bytes 734344867 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260753  bytes 831221873 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634192  bytes 887955455 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634192  bytes 887955455 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170743  bytes 734355360 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260823  bytes 831232532 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634238  bytes 887959703 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634238  bytes 887959703 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170762  bytes 734360216 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260853  bytes 831237045 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634256  bytes 887960983 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634256  bytes 887960983 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170781  bytes 734364903 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260882  bytes 831241495 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634274  bytes 887962275 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634274  bytes 887962275 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170810  bytes 734370915 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260922  bytes 831246818 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634304  bytes 887965537 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634304  bytes 887965537 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170829  bytes 734375483 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4260954  bytes 831251443 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634334  bytes 887967495 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634334  bytes 887967495 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170895  bytes 734389953 (734.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4261045  bytes 831266658 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634391  bytes 887972555 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634391  bytes 887972555 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3170952  bytes 734403541 (734.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4261123  bytes 831281011 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634505  bytes 887989825 (887.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634505  bytes 887989825 (887.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171033  bytes 734422398 (734.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4261215  bytes 831299318 (831.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634632  bytes 888007951 (888.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634632  bytes 888007951 (888.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171102  bytes 734437789 (734.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4261299  bytes 831314364 (831.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634756  bytes 888026945 (888.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634756  bytes 888026945 (888.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171167  bytes 734451853 (734.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4261381  bytes 831329029 (831.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5634889  bytes 888045396 (888.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5634889  bytes 888045396 (888.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171283  bytes 734475966 (734.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4261515  bytes 831353179 (831.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5635047  bytes 888066653 (888.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5635047  bytes 888066653 (888.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171348  bytes 734490398 (734.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4261591  bytes 831368020 (831.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5635165  bytes 888084107 (888.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5635165  bytes 888084107 (888.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171409  bytes 734503990 (734.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4261669  bytes 831382409 (831.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5635285  bytes 888101535 (888.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5635285  bytes 888101535 (888.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171475  bytes 734518721 (734.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4261755  bytes 831397959 (831.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5635422  bytes 888121499 (888.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5635422  bytes 888121499 (888.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171544  bytes 734536080 (734.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4261847  bytes 831413890 (831.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5635566  bytes 888140649 (888.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5635566  bytes 888140649 (888.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171659  bytes 734560194 (734.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4261980  bytes 831438584 (831.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5635720  bytes 888161469 (888.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5635720  bytes 888161469 (888.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171724  bytes 734574033 (734.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4262057  bytes 831452925 (831.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5635848  bytes 888179541 (888.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5635848  bytes 888179541 (888.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171782  bytes 734587461 (734.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4262135  bytes 831467281 (831.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5635963  bytes 888196839 (888.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5635963  bytes 888196839 (888.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171857  bytes 734602785 (734.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4262231  bytes 831484171 (831.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5636104  bytes 888216953 (888.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5636104  bytes 888216953 (888.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3171914  bytes 734616225 (734.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4262310  bytes 831498597 (831.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5636230  bytes 888234898 (888.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5636230  bytes 888234898 (888.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172024  bytes 734639519 (734.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4262445  bytes 831522810 (831.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5636390  bytes 888256148 (888.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5636390  bytes 888256148 (888.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172092  bytes 734653627 (734.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4262527  bytes 831538875 (831.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5636504  bytes 888273358 (888.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5636504  bytes 888273358 (888.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172160  bytes 734671811 (734.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4262619  bytes 831554860 (831.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5636626  bytes 888291162 (888.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5636626  bytes 888291162 (888.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172226  bytes 734686617 (734.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4262709  bytes 831570165 (831.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5636754  bytes 888310542 (888.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5636754  bytes 888310542 (888.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172281  bytes 734699865 (734.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4262783  bytes 831584238 (831.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5636870  bytes 888327892 (888.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5636870  bytes 888327892 (888.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172394  bytes 734723607 (734.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4262919  bytes 831608953 (831.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5637045  bytes 888350070 (888.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5637045  bytes 888350070 (888.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172454  bytes 734737334 (734.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4262999  bytes 831623645 (831.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5637171  bytes 888367964 (888.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5637171  bytes 888367964 (888.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172510  bytes 734750674 (734.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4263078  bytes 831638060 (831.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5637292  bytes 888385538 (888.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5637292  bytes 888385538 (888.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172572  bytes 734765218 (734.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4263164  bytes 831653103 (831.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5637428  bytes 888405334 (888.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5637428  bytes 888405334 (888.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172636  bytes 734782415 (734.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4263250  bytes 831668691 (831.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5637556  bytes 888423460 (888.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5637556  bytes 888423460 (888.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172726  bytes 734801889 (734.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4263368  bytes 831688905 (831.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5637704  bytes 888443961 (888.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5637704  bytes 888443961 (888.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172817  bytes 734820619 (734.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4263473  bytes 831708613 (831.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5637841  bytes 888462701 (888.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5637841  bytes 888462701 (888.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172881  bytes 734834779 (734.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4263554  bytes 831723376 (831.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5637959  bytes 888480155 (888.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5637959  bytes 888480155 (888.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3172948  bytes 734849614 (734.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4263644  bytes 831738710 (831.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5638090  bytes 888499785 (888.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5638090  bytes 888499785 (888.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173000  bytes 734862674 (734.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4263722  bytes 831753067 (831.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5638210  bytes 888517343 (888.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5638210  bytes 888517343 (888.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173086  bytes 734881690 (734.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4263838  bytes 831774025 (831.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5638360  bytes 888537910 (888.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5638360  bytes 888537910 (888.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173176  bytes 734900056 (734.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4263943  bytes 831793249 (831.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5638500  bytes 888556783 (888.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5638500  bytes 888556783 (888.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173244  bytes 734917996 (734.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4264030  bytes 831808868 (831.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5638622  bytes 888574551 (888.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5638622  bytes 888574551 (888.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173309  bytes 734932856 (734.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4264119  bytes 831825213 (831.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5638763  bytes 888594605 (888.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5638763  bytes 888594605 (888.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173366  bytes 734946347 (734.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4264196  bytes 831839543 (831.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5638879  bytes 888612015 (888.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5638879  bytes 888612015 (888.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173451  bytes 734965339 (734.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4264309  bytes 831859255 (831.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5639032  bytes 888632800 (888.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5639032  bytes 888632800 (888.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173532  bytes 734983332 (734.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4264410  bytes 831878206 (831.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5639169  bytes 888651481 (888.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5639169  bytes 888651481 (888.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173590  bytes 734997080 (734.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4264488  bytes 831892595 (831.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5639294  bytes 888669335 (888.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5639294  bytes 888669335 (888.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173653  bytes 735011996 (735.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4264578  bytes 831907946 (831.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5639424  bytes 888688795 (888.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5639424  bytes 888688795 (888.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173721  bytes 735029199 (735.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4264667  bytes 831924887 (831.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5639556  bytes 888707235 (888.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5639556  bytes 888707235 (888.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173785  bytes 735044036 (735.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4264754  bytes 831939926 (831.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5639691  bytes 888726868 (888.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5639691  bytes 888726868 (888.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173893  bytes 735066408 (735.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4264882  bytes 831966460 (831.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5639838  bytes 888746213 (888.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5639838  bytes 888746213 (888.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3173958  bytes 735080363 (735.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4264964  bytes 831981179 (831.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5639962  bytes 888764015 (888.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5639962  bytes 888764015 (888.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174024  bytes 735095165 (735.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4265049  bytes 831996169 (831.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5640093  bytes 888783527 (888.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5640093  bytes 888783527 (888.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174085  bytes 735109057 (735.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4265128  bytes 832011798 (832.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5640212  bytes 888800903 (888.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5640212  bytes 888800903 (888.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174149  bytes 735123776 (735.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4265218  bytes 832027100 (832.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5640354  bytes 888821038 (888.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5640354  bytes 888821038 (888.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174249  bytes 735145767 (735.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4265345  bytes 832050676 (832.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5640504  bytes 888840564 (888.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5640504  bytes 888840564 (888.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174327  bytes 735164247 (735.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4265436  bytes 832066775 (832.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5640623  bytes 888858082 (888.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5640623  bytes 888858082 (888.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174389  bytes 735178759 (735.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4265519  bytes 832081612 (832.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5640749  bytes 888877334 (888.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5640749  bytes 888877334 (888.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174442  bytes 735191899 (735.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4265595  bytes 832095797 (832.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5640865  bytes 888894708 (888.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5640865  bytes 888894708 (888.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174505  bytes 735206389 (735.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4265683  bytes 832110930 (832.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5641007  bytes 888914878 (888.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5641007  bytes 888914878 (888.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174608  bytes 735229328 (735.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4265810  bytes 832134706 (832.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5641146  bytes 888933715 (888.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5641146  bytes 888933715 (888.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174672  bytes 735243239 (735.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4265891  bytes 832149344 (832.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5641271  bytes 888951557 (888.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5641271  bytes 888951557 (888.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174737  bytes 735257956 (735.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4265979  bytes 832164528 (832.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5641403  bytes 888971179 (888.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5641403  bytes 888971179 (888.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174805  bytes 735275096 (735.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4266065  bytes 832180032 (832.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5641535  bytes 888989537 (888.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5641535  bytes 888989537 (888.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174870  bytes 735289905 (735.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4266152  bytes 832195032 (832.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5641667  bytes 889008961 (889.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5641667  bytes 889008961 (889.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3174974  bytes 735312162 (735.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4266277  bytes 832219566 (832.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5641813  bytes 889028291 (889.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5641813  bytes 889028291 (889.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175036  bytes 735325833 (735.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4266353  bytes 832233798 (832.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5641937  bytes 889046143 (889.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5641937  bytes 889046143 (889.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175100  bytes 735340543 (735.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4266445  bytes 832249359 (832.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5642073  bytes 889065951 (889.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5642073  bytes 889065951 (889.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175162  bytes 735354466 (735.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4266527  bytes 832265203 (832.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5642193  bytes 889083533 (889.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5642193  bytes 889083533 (889.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175222  bytes 735368765 (735.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4266608  bytes 832279811 (832.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5642321  bytes 889102747 (889.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5642321  bytes 889102747 (889.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175321  bytes 735390896 (735.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4266734  bytes 832303201 (832.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5642484  bytes 889122964 (889.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5642484  bytes 889122964 (889.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175394  bytes 735409104 (735.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4266829  bytes 832319632 (832.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5642615  bytes 889141224 (889.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5642615  bytes 889141224 (889.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175460  bytes 735423848 (735.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4266920  bytes 832334962 (832.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5642747  bytes 889160788 (889.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5642747  bytes 889160788 (889.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175520  bytes 735437700 (735.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4267000  bytes 832349531 (832.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5642873  bytes 889178718 (889.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5642873  bytes 889178718 (889.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175580  bytes 735451955 (735.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4267083  bytes 832364359 (832.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5642989  bytes 889197308 (889.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5642989  bytes 889197308 (889.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175662  bytes 735470223 (735.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4267193  bytes 832383939 (832.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5643141  bytes 889216875 (889.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5643141  bytes 889216875 (889.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175738  bytes 735487936 (735.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4267291  bytes 832402580 (832.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5643271  bytes 889235153 (889.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5643271  bytes 889235153 (889.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175804  bytes 735502656 (735.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4267377  bytes 832417831 (832.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5643405  bytes 889254821 (889.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5643405  bytes 889254821 (889.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175876  bytes 735521083 (735.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4267469  bytes 832434088 (832.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5643533  bytes 889272937 (889.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5643533  bytes 889272937 (889.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3175939  bytes 735535561 (735.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4267556  bytes 832449322 (832.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5643665  bytes 889292429 (889.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5643665  bytes 889292429 (889.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176026  bytes 735553662 (735.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4267660  bytes 832470055 (832.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5643806  bytes 889311324 (889.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5643806  bytes 889311324 (889.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176109  bytes 735571557 (735.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4267759  bytes 832489903 (832.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5643945  bytes 889330171 (889.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5643945  bytes 889330171 (889.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176181  bytes 735586661 (735.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4267848  bytes 832505083 (832.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5644083  bytes 889350105 (889.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5644083  bytes 889350105 (889.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176244  bytes 735601239 (735.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4267935  bytes 832521943 (832.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5644204  bytes 889367743 (889.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5644204  bytes 889367743 (889.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176312  bytes 735617714 (735.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4268025  bytes 832537340 (832.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5644336  bytes 889387189 (889.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5644336  bytes 889387189 (889.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176385  bytes 735635059 (735.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4268127  bytes 832556245 (832.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5644476  bytes 889405996 (889.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5644476  bytes 889405996 (889.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176478  bytes 735657372 (735.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4268243  bytes 832576859 (832.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5644614  bytes 889424847 (889.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5644614  bytes 889424847 (889.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176546  bytes 735672444 (735.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4268331  bytes 832592074 (832.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5644736  bytes 889443915 (889.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5644736  bytes 889443915 (889.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176608  bytes 735686616 (735.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4268416  bytes 832607025 (832.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5644865  bytes 889461977 (889.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5644865  bytes 889461977 (889.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176668  bytes 735700975 (735.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4268500  bytes 832621919 (832.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5644992  bytes 889481163 (889.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5644992  bytes 889481163 (889.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176730  bytes 735714699 (735.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4268586  bytes 832637048 (832.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5645125  bytes 889499452 (889.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5645125  bytes 889499452 (889.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176843  bytes 735737660 (735.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4268720  bytes 832661244 (832.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5645275  bytes 889519036 (889.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5645275  bytes 889519036 (889.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176913  bytes 735752928 (735.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4268809  bytes 832676485 (832.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5645415  bytes 889539040 (889.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5645415  bytes 889539040 (889.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3176982  bytes 735772243 (735.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4268897  bytes 832694518 (832.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5645541  bytes 889556898 (889.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5645541  bytes 889556898 (889.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177044  bytes 735786737 (735.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4268986  bytes 832709805 (832.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5645665  bytes 889575974 (889.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5645665  bytes 889575974 (889.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177103  bytes 735800280 (735.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4269071  bytes 832724635 (832.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5645801  bytes 889594602 (889.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5645801  bytes 889594602 (889.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177203  bytes 735822288 (735.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4269194  bytes 832747824 (832.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5645958  bytes 889614567 (889.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5645958  bytes 889614567 (889.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177266  bytes 735836895 (735.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4269276  bytes 832762526 (832.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5646092  bytes 889634163 (889.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5646092  bytes 889634163 (889.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177322  bytes 735852035 (735.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4269355  bytes 832776965 (832.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5646213  bytes 889651773 (889.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5646213  bytes 889651773 (889.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177389  bytes 735867016 (735.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4269444  bytes 832792199 (832.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5646345  bytes 889671231 (889.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5646345  bytes 889671231 (889.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177454  bytes 735880872 (735.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4269525  bytes 832807266 (832.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5646478  bytes 889689680 (889.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5646478  bytes 889689680 (889.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177568  bytes 735907102 (735.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4269659  bytes 832831868 (832.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5646626  bytes 889709031 (889.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5646626  bytes 889709031 (889.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177638  bytes 735922187 (735.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4269752  bytes 832847430 (832.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5646764  bytes 889729025 (889.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5646764  bytes 889729025 (889.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177692  bytes 735935627 (735.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4269830  bytes 832861867 (832.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5646882  bytes 889746479 (889.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5646882  bytes 889746479 (889.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177754  bytes 735950070 (735.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4269915  bytes 832876875 (832.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5647006  bytes 889765485 (889.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5647006  bytes 889765485 (889.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177813  bytes 735963838 (735.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4269994  bytes 832891330 (832.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5647128  bytes 889783209 (889.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5647128  bytes 889783209 (889.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177921  bytes 735986929 (735.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4270123  bytes 832916134 (832.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5647280  bytes 889802877 (889.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5647280  bytes 889802877 (889.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3177994  bytes 736002271 (736.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4270217  bytes 832931796 (832.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5647414  bytes 889822545 (889.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5647414  bytes 889822545 (889.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178066  bytes 736019938 (736.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4270309  bytes 832947705 (832.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5647544  bytes 889840789 (889.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5647544  bytes 889840789 (889.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178135  bytes 736034677 (736.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4270396  bytes 832963956 (832.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5647670  bytes 889859863 (889.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5647670  bytes 889859863 (889.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178191  bytes 736048045 (736.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4270473  bytes 832978266 (832.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5647794  bytes 889877699 (889.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5647794  bytes 889877699 (889.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178298  bytes 736070461 (736.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4270605  bytes 833002144 (833.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5647959  bytes 889898102 (889.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5647959  bytes 889898102 (889.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178369  bytes 736085467 (736.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4270696  bytes 833017562 (833.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5648100  bytes 889918196 (889.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5648100  bytes 889918196 (889.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178434  bytes 736099907 (736.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4270778  bytes 833032536 (833.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5648224  bytes 889936022 (889.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5648224  bytes 889936022 (889.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178502  bytes 736115057 (736.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4270862  bytes 833048033 (833.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5648346  bytes 889954924 (889.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5648346  bytes 889954924 (889.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178555  bytes 736128332 (736.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4270942  bytes 833062609 (833.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5648464  bytes 889972402 (889.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5648464  bytes 889972402 (889.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178651  bytes 736150724 (736.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4271064  bytes 833085922 (833.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5648622  bytes 889992324 (889.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5648622  bytes 889992324 (889.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178737  bytes 736169710 (736.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4271174  bytes 833105498 (833.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5648765  bytes 890012686 (890.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5648765  bytes 890012686 (890.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178794  bytes 736183182 (736.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4271258  bytes 833121427 (833.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5648886  bytes 890030320 (890.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5648886  bytes 890030320 (890.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178859  bytes 736197845 (736.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4271343  bytes 833137487 (833.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5649013  bytes 890049518 (890.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5649013  bytes 890049518 (890.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178915  bytes 736211209 (736.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4271418  bytes 833151630 (833.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5649130  bytes 890066944 (890.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5649130  bytes 890066944 (890.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3178996  bytes 736230690 (736.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4271526  bytes 833171269 (833.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5649270  bytes 890085813 (890.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5649270  bytes 890085813 (890.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179091  bytes 736250760 (736.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4271640  bytes 833191405 (833.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5649414  bytes 890106199 (890.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5649414  bytes 890106199 (890.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179156  bytes 736267868 (736.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4271727  bytes 833207115 (833.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5649541  bytes 890124251 (890.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5649541  bytes 890124251 (890.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179223  bytes 736282865 (736.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4271812  bytes 833222015 (833.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5649670  bytes 890143553 (890.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5649670  bytes 890143553 (890.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179295  bytes 736298001 (736.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4271895  bytes 833238019 (833.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5649793  bytes 890161267 (890.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5649793  bytes 890161267 (890.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179371  bytes 736315554 (736.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4271999  bytes 833257204 (833.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5649931  bytes 890180040 (890.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5649931  bytes 890180040 (890.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179467  bytes 736335119 (736.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4272114  bytes 833277318 (833.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5650089  bytes 890201314 (890.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5650089  bytes 890201314 (890.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179534  bytes 736349319 (736.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4272197  bytes 833293886 (833.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5650211  bytes 890218964 (890.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5650211  bytes 890218964 (890.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179602  bytes 736364693 (736.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4272285  bytes 833310700 (833.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5650341  bytes 890238318 (890.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5650341  bytes 890238318 (890.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179655  bytes 736377833 (736.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4272356  bytes 833324576 (833.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5650458  bytes 890255684 (890.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5650458  bytes 890255684 (890.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179723  bytes 736395435 (736.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4272451  bytes 833340771 (833.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5650594  bytes 890274259 (890.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5650594  bytes 890274259 (890.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179846  bytes 736420410 (736.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4272596  bytes 833366672 (833.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5650755  bytes 890295735 (890.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5650755  bytes 890295735 (890.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179913  bytes 736436134 (736.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4272678  bytes 833381422 (833.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5650873  bytes 890313189 (890.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5650873  bytes 890313189 (890.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3179978  bytes 736450693 (736.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4272761  bytes 833397319 (833.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5650995  bytes 890331961 (890.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5650995  bytes 890331961 (890.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180033  bytes 736463949 (736.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4272837  bytes 833411505 (833.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5651112  bytes 890349399 (890.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5651112  bytes 890349399 (890.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180102  bytes 736479229 (736.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4272932  bytes 833428770 (833.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5651251  bytes 890368162 (890.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5651251  bytes 890368162 (890.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180220  bytes 736503679 (736.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4273069  bytes 833453426 (833.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5651419  bytes 890390102 (890.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5651419  bytes 890390102 (890.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180290  bytes 736521150 (736.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4273155  bytes 833470423 (833.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5651545  bytes 890407960 (890.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5651545  bytes 890407960 (890.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180363  bytes 736538280 (736.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4273251  bytes 833486446 (833.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5651675  bytes 890427302 (890.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5651675  bytes 890427302 (890.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180426  bytes 736552308 (736.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4273330  bytes 833501057 (833.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5651789  bytes 890444548 (890.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5651789  bytes 890444548 (890.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180486  bytes 736566008 (736.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4273412  bytes 833515818 (833.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5651918  bytes 890462637 (890.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5651918  bytes 890462637 (890.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180598  bytes 736589532 (736.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4273554  bytes 833540643 (833.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5652086  bytes 890484561 (890.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5652086  bytes 890484561 (890.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180663  bytes 736603719 (736.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4273634  bytes 833555215 (833.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5652203  bytes 890502061 (890.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5652203  bytes 890502061 (890.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180733  bytes 736618814 (736.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4273720  bytes 833570382 (833.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5652330  bytes 890521247 (890.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5652330  bytes 890521247 (890.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180794  bytes 736632505 (736.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4273798  bytes 833585859 (833.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5652450  bytes 890538805 (890.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5652450  bytes 890538805 (890.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180868  bytes 736650661 (736.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4273896  bytes 833602385 (833.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5652582  bytes 890557153 (890.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5652582  bytes 890557153 (890.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3180987  bytes 736675467 (736.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4274039  bytes 833629054 (833.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5652753  bytes 890579168 (890.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5652753  bytes 890579168 (890.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181046  bytes 736689087 (736.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4274114  bytes 833643186 (833.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5652877  bytes 890596934 (890.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5652877  bytes 890596934 (890.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181117  bytes 736704346 (736.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4274207  bytes 833658695 (833.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5653005  bytes 890616164 (890.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5653005  bytes 890616164 (890.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181170  bytes 736717446 (736.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4274282  bytes 833672879 (833.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5653123  bytes 890633618 (890.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5653123  bytes 890633618 (890.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181226  bytes 736730858 (736.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4274361  bytes 833687323 (833.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5653245  bytes 890651316 (890.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5653245  bytes 890651316 (890.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181342  bytes 736754768 (736.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4274503  bytes 833712336 (833.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5653420  bytes 890673625 (890.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5653420  bytes 890673625 (890.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181415  bytes 736772244 (736.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4274592  bytes 833728303 (833.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5653540  bytes 890691289 (890.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5653540  bytes 890691289 (890.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181480  bytes 736787161 (736.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4274680  bytes 833743394 (833.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5653670  bytes 890710667 (890.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5653670  bytes 890710667 (890.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181543  bytes 736801364 (736.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4274762  bytes 833760223 (833.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5653790  bytes 890728225 (890.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5653790  bytes 890728225 (890.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181596  bytes 736814544 (736.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4274838  bytes 833774429 (833.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5653912  bytes 890745887 (890.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5653912  bytes 890745887 (890.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181691  bytes 736834436 (736.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4274960  bytes 833794960 (833.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5654080  bytes 890767734 (890.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5654080  bytes 890767734 (890.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181780  bytes 736853026 (736.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4275058  bytes 833813591 (833.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5654218  bytes 890786512 (890.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5654218  bytes 890786512 (890.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181842  bytes 736867497 (736.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4275146  bytes 833828758 (833.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5654351  bytes 890806046 (890.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5654351  bytes 890806046 (890.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181898  bytes 736881356 (736.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4275228  bytes 833843403 (833.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5654469  bytes 890823500 (890.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5654469  bytes 890823500 (890.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3181967  bytes 736898843 (736.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4275317  bytes 833859163 (833.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5654589  bytes 890841164 (890.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5654589  bytes 890841164 (890.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182062  bytes 736918577 (736.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4275436  bytes 833879290 (833.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5654751  bytes 890862615 (890.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5654751  bytes 890862615 (890.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182152  bytes 736936958 (736.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4275539  bytes 833898350 (833.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5654887  bytes 890881220 (890.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5654887  bytes 890881220 (890.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182221  bytes 736951909 (736.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4275626  bytes 833913539 (833.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5655016  bytes 890900546 (890.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5655016  bytes 890900546 (890.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182281  bytes 736965453 (736.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4275702  bytes 833927781 (833.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5655132  bytes 890917896 (890.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5655132  bytes 890917896 (890.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182348  bytes 736980301 (736.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4275787  bytes 833942725 (833.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5655255  bytes 890935610 (890.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5655255  bytes 890935610 (890.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182437  bytes 736999553 (736.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4275898  bytes 833962298 (833.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5655415  bytes 890956961 (890.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5655415  bytes 890956961 (890.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182530  bytes 737021263 (737.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4276011  bytes 833983909 (833.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5655557  bytes 890975983 (890.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5655557  bytes 890975983 (890.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182597  bytes 737036376 (737.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4276098  bytes 834000081 (834.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5655689  bytes 890995465 (890.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5655689  bytes 890995465 (890.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182653  bytes 737049735 (737.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4276174  bytes 834014790 (834.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5655808  bytes 891012971 (891.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5655808  bytes 891012971 (891.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182713  bytes 737063546 (737.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4276249  bytes 834029504 (834.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5655922  bytes 891030063 (891.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5655922  bytes 891030063 (891.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182783  bytes 737078526 (737.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4276348  bytes 834046529 (834.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5656078  bytes 891051144 (891.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5656078  bytes 891051144 (891.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182888  bytes 737101954 (737.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4276477  bytes 834071898 (834.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5656229  bytes 891070744 (891.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5656229  bytes 891070744 (891.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3182957  bytes 737118544 (737.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4276569  bytes 834087437 (834.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5656360  bytes 891090184 (891.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5656360  bytes 891090184 (891.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183014  bytes 737132624 (737.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4276649  bytes 834101959 (834.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5656475  bytes 891107364 (891.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5656475  bytes 891107364 (891.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183084  bytes 737150582 (737.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4276740  bytes 834118946 (834.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5656599  bytes 891125236 (891.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5656599  bytes 891125236 (891.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183156  bytes 737166086 (737.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4276839  bytes 834136032 (834.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5656754  bytes 891146307 (891.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5656754  bytes 891146307 (891.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183262  bytes 737188525 (737.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4276963  bytes 834159403 (834.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5656898  bytes 891165497 (891.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5656898  bytes 891165497 (891.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183326  bytes 737203087 (737.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4277044  bytes 834174087 (834.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5657017  bytes 891184089 (891.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5657017  bytes 891184089 (891.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183380  bytes 737216415 (737.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4277123  bytes 834188543 (834.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5657141  bytes 891201915 (891.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5657141  bytes 891201915 (891.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183438  bytes 737229819 (737.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4277198  bytes 834202727 (834.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5657251  bytes 891218953 (891.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5657251  bytes 891218953 (891.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183506  bytes 737244731 (737.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4277285  bytes 834217793 (834.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5657396  bytes 891239349 (891.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5657396  bytes 891239349 (891.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183632  bytes 737273039 (737.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4277430  bytes 834247930 (834.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5657554  bytes 891259436 (891.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5657554  bytes 891259436 (891.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183703  bytes 737288359 (737.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4277521  bytes 834264466 (834.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5657679  bytes 891278494 (891.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5657679  bytes 891278494 (891.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183763  bytes 737302243 (737.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4277605  bytes 834280407 (834.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5657806  bytes 891296476 (891.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5657806  bytes 891296476 (891.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183820  bytes 737315831 (737.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4277684  bytes 834294844 (834.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5657920  bytes 891313722 (891.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5657920  bytes 891313722 (891.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183887  bytes 737330774 (737.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4277773  bytes 834310130 (834.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5658049  bytes 891333190 (891.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5658049  bytes 891333190 (891.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3183995  bytes 737354547 (737.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4277902  bytes 834334926 (834.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5658207  bytes 891353147 (891.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5658207  bytes 891353147 (891.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184061  bytes 737369524 (737.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4277990  bytes 834350136 (834.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5658339  bytes 891372677 (891.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5658339  bytes 891372677 (891.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184121  bytes 737383067 (737.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4278070  bytes 834364626 (834.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5658459  bytes 891390341 (891.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5658459  bytes 891390341 (891.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184198  bytes 737401803 (737.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4278163  bytes 834381798 (834.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5658580  bytes 891408057 (891.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5658580  bytes 891408057 (891.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184275  bytes 737417627 (737.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4278256  bytes 834399213 (834.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5658717  bytes 891427881 (891.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5658717  bytes 891427881 (891.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184385  bytes 737440877 (737.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4278388  bytes 834424845 (834.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5658882  bytes 891448262 (891.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5658882  bytes 891448262 (891.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184453  bytes 737455744 (737.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4278474  bytes 834441061 (834.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5658999  bytes 891466904 (891.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5658999  bytes 891466904 (891.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184521  bytes 737470039 (737.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4278557  bytes 834457021 (834.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5659123  bytes 891484730 (891.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5659123  bytes 891484730 (891.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184585  bytes 737484123 (737.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4278638  bytes 834471882 (834.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5659245  bytes 891502392 (891.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5659245  bytes 891502392 (891.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184649  bytes 737498698 (737.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4278725  bytes 834486984 (834.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5659374  bytes 891521858 (891.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5659374  bytes 891521858 (891.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184733  bytes 737517051 (737.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4278838  bytes 834509049 (834.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5659530  bytes 891541656 (891.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5659530  bytes 891541656 (891.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184831  bytes 737537183 (737.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4278952  bytes 834529096 (834.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5659665  bytes 891561410 (891.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5659665  bytes 891561410 (891.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184889  bytes 737550619 (737.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4279031  bytes 834543577 (834.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5659788  bytes 891579184 (891.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5659788  bytes 891579184 (891.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3184943  bytes 737563863 (737.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4279109  bytes 834558052 (834.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5659909  bytes 891596794 (891.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5659909  bytes 891596794 (891.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185016  bytes 737579020 (737.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4279198  bytes 834575003 (834.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5660049  bytes 891616832 (891.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5660049  bytes 891616832 (891.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185098  bytes 737597004 (737.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4279304  bytes 834596316 (834.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5660196  bytes 891636063 (891.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5660196  bytes 891636063 (891.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185189  bytes 737616462 (737.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4279415  bytes 834616248 (834.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5660344  bytes 891656593 (891.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5660344  bytes 891656593 (891.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185241  bytes 737629598 (737.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4279489  bytes 834630359 (834.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5660460  bytes 891673989 (891.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5660460  bytes 891673989 (891.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185297  bytes 737643100 (737.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4279572  bytes 834645118 (834.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5660591  bytes 891692225 (891.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5660591  bytes 891692225 (891.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185362  bytes 737658544 (737.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4279663  bytes 834660577 (834.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5660715  bytes 891711373 (891.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5660715  bytes 891711373 (891.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185444  bytes 737676421 (737.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4279768  bytes 834679673 (834.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5660857  bytes 891730308 (891.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5660857  bytes 891730308 (891.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185530  bytes 737695326 (737.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4279873  bytes 834699020 (834.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5660996  bytes 891750345 (891.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5660996  bytes 891750345 (891.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185593  bytes 737709586 (737.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4279958  bytes 834715129 (834.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5661114  bytes 891767799 (891.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5661114  bytes 891767799 (891.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185652  bytes 737723129 (737.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4280035  bytes 834729449 (834.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5661235  bytes 891785433 (891.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5661235  bytes 891785433 (891.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185717  bytes 737737824 (737.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4280122  bytes 834744515 (834.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5661359  bytes 891804463 (891.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5661359  bytes 891804463 (891.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185773  bytes 737751180 (737.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4280209  bytes 834759500 (834.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5661501  bytes 891823398 (891.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5661501  bytes 891823398 (891.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185882  bytes 737774513 (737.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4280341  bytes 834784626 (834.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5661657  bytes 891844499 (891.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5661657  bytes 891844499 (891.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185940  bytes 737787973 (737.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4280412  bytes 834798507 (834.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5661775  bytes 891861989 (891.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5661775  bytes 891861989 (891.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3185992  bytes 737801389 (737.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4280489  bytes 834812800 (834.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5661887  bytes 891879001 (891.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5661887  bytes 891879001 (891.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3186060  bytes 737816669 (737.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4280579  bytes 834828281 (834.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5662015  bytes 891898357 (891.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5662015  bytes 891898357 (891.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3186118  bytes 737830149 (737.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4280664  bytes 834843142 (834.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5662152  bytes 891917051 (891.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5662152  bytes 891917051 (891.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3186235  bytes 737855584 (737.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4280802  bytes 834868405 (834.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5662304  bytes 891937743 (891.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5662304  bytes 891937743 (891.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3186287  bytes 737868615 (737.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4280880  bytes 834882743 (834.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5662426  bytes 891955431 (891.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5662426  bytes 891955431 (891.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3186348  bytes 737882294 (737.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4280962  bytes 834898053 (834.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5662551  bytes 891973355 (891.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5662551  bytes 891973355 (891.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3186420  bytes 737897553 (737.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4281052  bytes 834913397 (834.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5662689  bytes 891993335 (891.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5662689  bytes 891993335 (891.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3186485  bytes 737911825 (737.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4281138  bytes 834928348 (834.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5662818  bytes 892011399 (892.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5662818  bytes 892011399 (892.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3186602  bytes 737936291 (737.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4281278  bytes 834953133 (834.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5662982  bytes 892032942 (892.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5662982  bytes 892032942 (892.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3186658  bytes 737949927 (737.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4281355  bytes 834967406 (834.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5663098  bytes 892050292 (892.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5663098  bytes 892050292 (892.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3186713  bytes 737963247 (737.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4281432  bytes 834981719 (834.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5663212  bytes 892067598 (892.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5663212  bytes 892067598 (892.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/04102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3186791  bytes 737979201 (737.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4281527  bytes 834997584 (834.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5663347  bytes 892087318 (892.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5663347  bytes 892087318 (892.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/04/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
