erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682299 bytes 146152007 (146.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875254 bytes 315952135 (315.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640654 bytes 264488448 (264.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640654 bytes 264488448 (264.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682323 bytes 146157304 (146.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875286 bytes 315956320 (315.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640675 bytes 264489924 (264.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640675 bytes 264489924 (264.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682345 bytes 146162453 (146.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875314 bytes 315960224 (315.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640691 bytes 264491100 (264.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640691 bytes 264491100 (264.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682365 bytes 146167376 (146.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875340 bytes 315963973 (315.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640712 bytes 264492576 (264.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640712 bytes 264492576 (264.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682402 bytes 146174075 (146.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875384 bytes 315969146 (315.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640732 bytes 264494580 (264.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640732 bytes 264494580 (264.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682433 bytes 146181421 (146.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875421 bytes 315975046 (315.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640757 bytes 264496352 (264.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640757 bytes 264496352 (264.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682453 bytes 146186424 (146.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875449 bytes 315978989 (315.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640775 bytes 264497648 (264.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640775 bytes 264497648 (264.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682491 bytes 146195259 (146.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875501 bytes 315986807 (315.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640795 bytes 264499140 (264.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640795 bytes 264499140 (264.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682513 bytes 146200387 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875530 bytes 315990777 (315.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640811 bytes 264500316 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640811 bytes 264500316 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682573 bytes 146211736 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875610 bytes 316001977 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640896 bytes 264511969 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640896 bytes 264511969 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682596 bytes 146216974 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875637 bytes 316005799 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640912 bytes 264513145 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640912 bytes 264513145 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682614 bytes 146221779 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875664 bytes 316009679 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640933 bytes 264514621 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640933 bytes 264514621 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682635 bytes 146226846 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875692 bytes 316013648 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640949 bytes 264515797 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640949 bytes 264515797 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682656 bytes 146231866 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875719 bytes 316017478 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640970 bytes 264517273 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640970 bytes 264517273 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classisudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 46, in getAllInfosJetson get_info_from_log(nbr_pic_colors,timeout,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 346, in get_info_from_log logger.info(" file {} does not exist. All values set to 0.".format(file_path)) Message: ' file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0.' Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 59, in getAllInfosJetson logger.info('ip: {} '.format(ip[:22])) Message: 'ip: 192.168.70.14-172.17.0 ' Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () fy/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682690 bytes 146238319 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875760 bytes 316022416 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 640990 bytes 264519277 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 640990 bytes 264519277 (264.5 MB)\n TX errors 0 dropped 0 oversudo: no tty present and no askpass program specified runs 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 682690 bytes 146238319 (146.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 875760 bytes 316022416 (316.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 640990 bytes 264519277 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 640990 bytes 264519277 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682719 bytes 146245485 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875797 bytes 316028328 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641010 bytes 264520749 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641010 bytes 264520749 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682740 bytes 146250496 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875825 bytes 316032224 (316.0 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 682740 bytes 146250496 (146.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 875825 bytes 316032224 (316.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641026 bytes 264521925 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641026 bytes 264521925 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682761 bytes 146255536 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875853 bytes 316036113 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641047 bytes 264523401 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641047 bytes 264523401 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682780 bytes 146260393 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875879 bytes 316039882 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 682780 bytes 146260393 (146.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 875879 bytes 316039882 (316.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641065 bytes 264524697 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641065 bytes 264524697 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682836 bytes 146271291 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875947 bytes 316049251 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641106 bytes 264528005 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641106 bytes 264528005 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682857 bytes 146276331 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 875974 bytes 316053067 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 682857 bytes 146276331 (146.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 875974 bytes 316053067 (316.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641122 bytes 264529181 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641122 bytes 264529181 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682877 bytes 146281285 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876001 bytes 316056878 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641139 bytes 264530341 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641139 bytes 264530341 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682898 bytes 146286268 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876028 bytes 316060670 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 682898 bytes 146286268 (146.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876028 bytes 316060670 (316.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641155 bytes 264531517 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641155 bytes 264531517 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682919 bytes 146291357 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876055 bytes 316064500 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641172 bytes 264532685 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641172 bytes 264532685 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682957 bytes 146298158 (146.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876099 bytes 316069671 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 682957 bytes 146298158 (146.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876099 bytes 316069671 (316.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641192 bytes 264534689 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641192 bytes 264534689 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 682985 bytes 146305230 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876135 bytes 316075514 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641212 bytes 264536161 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641212 bytes 264536161 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683007 bytes 146310379 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876163 bytes 316079419 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683007 bytes 146310379 (146.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876163 bytes 316079419 (316.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641228 bytes 264537337 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641228 bytes 264537337 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683028 bytes 146315362 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876191 bytes 316083309 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641244 bytes 264538513 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641244 bytes 264538513 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683048 bytes 146320285 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876219 bytes 316087199 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683048 bytes 146320285 (146.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876219 bytes 316087199 (316.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641260 bytes 264539689 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641260 bytes 264539689 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683090 bytes 146327568 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876268 bytes 316092884 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641301 bytes 264542923 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641301 bytes 264542923 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683110 bytes 146332534 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876296 bytes 316096801 (316.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683110 bytes 146332534 (146.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876296 bytes 316096801 (316.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641320 bytes 264544279 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641320 bytes 264544279 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683129 bytes 146337433 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876323 bytes 316100663 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641337 bytes 264545515 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641337 bytes 264545515 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683177 bytes 146347121 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876377 bytes 316108678 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683177 bytes 146347121 (146.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876377 bytes 316108678 (316.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641361 bytes 264547247 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641361 bytes 264547247 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683216 bytes 146356275 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876435 bytes 316118205 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641427 bytes 264557202 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641427 bytes 264557202 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683250 bytes 146362646 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876476 bytes 316123117 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683250 bytes 146362646 (146.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876476 bytes 316123117 (316.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641450 bytes 264559386 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641450 bytes 264559386 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683298 bytes 146374087 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876544 bytes 316134679 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641516 bytes 264569413 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641516 bytes 264569413 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683317 bytes 146378972 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876571 bytes 316138553 (316.1 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683317 bytes 146378972 (146.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876571 bytes 316138553 (316.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641532 bytes 264570589 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641532 bytes 264570589 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683357 bytes 146388224 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876628 bytes 316148002 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641596 bytes 264580424 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641596 bytes 264580424 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683376 bytes 146393138 (146.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876653 bytes 316151730 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683376 bytes 146393138 (146.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876653 bytes 316151730 (316.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641612 bytes 264581600 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641612 bytes 264581600 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683439 bytes 146404764 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876729 bytes 316162881 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641696 bytes 264593199 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641696 bytes 264593199 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683460 bytes 146409853 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876755 bytes 316166670 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683460 bytes 146409853 (146.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876755 bytes 316166670 (316.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641712 bytes 264594375 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641712 bytes 264594375 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683480 bytes 146414776 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876782 bytes 316170494 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641728 bytes 264595551 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641728 bytes 264595551 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683498 bytes 146419573 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876806 bytes 316174148 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683498 bytes 146419573 (146.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876806 bytes 316174148 (316.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641755 bytes 264597387 (264.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641755 bytes 264597387 (264.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683527 bytes 146425238 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876835 bytes 316178151 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641772 bytes 264598623 (264.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641772 bytes 264598623 (264.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683579 bytes 146435612 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876900 bytes 316187050 (316.1 MBsudo: no tty present and no askpass program specified )\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641801 bytes 264601243 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641801 bytes 264601243 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683579 bytes 146435612 (146.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876900 bytes 316187050 (316.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641801 bytes 264601243 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641801 bytes 264601243 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisisudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683636 bytes 146447665 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876968 bytes 316198592 (316.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641867 bytes 264611270 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641867 bytes 264611270 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683656 bytes 146452574 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 876997 bytes 316202586 (316.2 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683656 bytes 146452574 (146.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 876997 bytes 316202586 (316.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641883 bytes 264612446 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641883 bytes 264612446 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683695 bytes 146461710 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877055 bytes 316212101 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 641946 bytes 264622229 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 641946 bytes 264622229 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683721 bytes 146467090 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877082 bytes 316215952 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683721 bytes 146467090 (146.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877082 bytes 316215952 (316.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 641962 bytes 264623405 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 641962 bytes 264623405 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683782 bytes 146478593 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877163 bytes 316227235 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642048 bytes 264635110 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642048 bytes 264635110 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683801 bytes 146483456 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877189 bytes 316231009 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683801 bytes 146483456 (146.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877189 bytes 316231009 (316.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642064 bytes 264636286 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642064 bytes 264636286 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683820 bytes 146488319 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877216 bytes 316234857 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642080 bytes 264637462 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642080 bytes 264637462 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683841 bytes 146493390 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877243 bytes 316238700 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683841 bytes 146493390 (146.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877243 bytes 316238700 (316.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642101 bytes 264638938 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642101 bytes 264638938 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683867 bytes 146498776 (146.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877270 bytes 316242563 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642117 bytes 264640114 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642117 bytes 264640114 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683901 bytes 146505147 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877312 bytes 316247541 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683901 bytes 146505147 (146.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877312 bytes 316247541 (316.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642148 bytes 264642778 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642148 bytes 264642778 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683931 bytes 146512396 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877353 bytes 316253770 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642171 bytes 264644434 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642171 bytes 264644434 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 683971 bytes 146521388 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877408 bytes 316261822 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 683971 bytes 146521388 (146.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877408 bytes 316261822 (316.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642192 bytes 264645988 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642192 bytes 264645988 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684008 bytes 146530461 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877465 bytes 316271289 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642255 bytes 264655771 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642255 bytes 264655771 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684030 bytes 146535638 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877491 bytes 316275085 (316.2 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684030 bytes 146535638 (146.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877491 bytes 316275085 (316.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642271 bytes 264656947 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642271 bytes 264656947 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684089 bytes 146546896 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877569 bytes 316286282 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642353 bytes 264668440 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642353 bytes 264668440 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684107 bytes 146551693 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877594 bytes 316289970 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684107 bytes 146551693 (146.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877594 bytes 316289970 (316.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642365 bytes 264669300 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642365 bytes 264669300 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684127 bytes 146556673 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877619 bytes 316293678 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642381 bytes 264670476 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642381 bytes 264670476 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684146 bytes 146561615 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877645 bytes 316297505 (316.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684146 bytes 146561615 (146.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877645 bytes 316297505 (316.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642397 bytes 264671584 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642397 bytes 264671584 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684165 bytes 146566521 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877671 bytes 316301314 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642414 bytes 264672820 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642414 bytes 264672820 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684199 bytes 146572949 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877712 bytes 316306250 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684199 bytes 146572949 (146.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877712 bytes 316306250 (316.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642438 bytes 264675064 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642438 bytes 264675064 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684227 bytes 146580021 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877747 bytes 316312027 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642459 bytes 264676596 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642459 bytes 264676596 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684249 bytes 146585157 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877777 bytes 316316097 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684249 bytes 146585157 (146.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877777 bytes 316316097 (316.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642481 bytes 264678132 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642481 bytes 264678132 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684271 bytes 146590306 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877806 bytes 316320068 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642498 bytes 264679368 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642498 bytes 264679368 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684309 bytes 146599191 (146.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877857 bytes 316327867 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684309 bytes 146599191 (146.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877857 bytes 316327867 (316.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642518 bytes 264680860 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642518 bytes 264680860 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684368 bytes 146610517 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877933 bytes 316338988 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642603 bytes 264692513 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642603 bytes 264692513 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684388 bytes 146615491 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877960 bytes 316342824 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684388 bytes 146615491 (146.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 877960 bytes 316342824 (316.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642619 bytes 264693689 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642619 bytes 264693689 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684410 bytes 146620639 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 877989 bytes 316346829 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642635 bytes 264694865 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642635 bytes 264694865 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684431 bytes 146625659 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878017 bytes 316350734 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684431 bytes 146625659 (146.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878017 bytes 316350734 (316.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642651 bytes 264696041 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642651 bytes 264696041 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684452 bytes 146630699 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878044 bytes 316354558 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642672 bytes 264697517 (264.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642672 bytes 264697517 (264.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684486 bytes 146637152 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878086 bytes 316359595 (316.3 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684486 bytes 146637152 (146.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878086 bytes 316359595 (316.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642692 bytes 264699521 (264.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642692 bytes 264699521 (264.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684514 bytes 146644218 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878122 bytes 316365427 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642717 bytes 264701293 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642717 bytes 264701293 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684535 bytes 146649292 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878150 bytes 316369344 (316.3 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684535 bytes 146649292 (146.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878150 bytes 316369344 (316.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642733 bytes 264702469 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642733 bytes 264702469 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684555 bytes 146654252 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878178 bytes 316373272 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642749 bytes 264703645 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642749 bytes 264703645 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684573 bytes 146659049 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878204 bytes 316377065 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684573 bytes 146659049 (146.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878204 bytes 316377065 (316.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642770 bytes 264705121 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642770 bytes 264705121 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684620 bytes 146666649 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878251 bytes 316382595 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642809 bytes 264708235 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642809 bytes 264708235 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684657 bytes 146675448 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878301 bytes 316390342 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684657 bytes 146675448 (146.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878301 bytes 316390342 (316.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642829 bytes 264709727 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642829 bytes 264709727 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684701 bytes 146684964 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878356 bytes 316399688 (316.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642890 bytes 264719406 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642890 bytes 264719406 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684724 bytes 146690210 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878386 bytes 316403740 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684724 bytes 146690210 (146.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878386 bytes 316403740 (316.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642906 bytes 264720582 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642906 bytes 264720582 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684744 bytes 146695133 (146.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878413 bytes 316407564 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642927 bytes 264722058 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642927 bytes 264722058 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684778 bytes 146701596 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878454 bytes 316412521 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684778 bytes 146701596 (146.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878454 bytes 316412521 (316.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642947 bytes 264724062 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642947 bytes 264724062 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684810 bytes 146709072 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878491 bytes 316418449 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 642972 bytes 264725834 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 642972 bytes 264725834 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684833 bytes 146714317 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878521 bytes 316422536 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684833 bytes 146714317 (146.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878521 bytes 316422536 (316.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 642988 bytes 264727010 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 642988 bytes 264727010 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684852 bytes 146719174 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878548 bytes 316426373 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643004 bytes 264728186 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643004 bytes 264728186 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684873 bytes 146724214 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878575 bytes 316430198 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684873 bytes 146724214 (146.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878575 bytes 316430198 (316.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643020 bytes 264729362 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643020 bytes 264729362 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684919 bytes 146731783 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878622 bytes 316435767 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643057 bytes 264732354 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643057 bytes 264732354 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684940 bytes 146736815 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878650 bytes 316439672 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 684940 bytes 146736815 (146.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878650 bytes 316439672 (316.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643077 bytes 264733770 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643077 bytes 264733770 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 684962 bytes 146742001 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878678 bytes 316443597 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643096 bytes 264735126 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643096 bytes 264735126 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685001 bytes 146750939 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878730 bytes 316451432 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685001 bytes 146750939 (146.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878730 bytes 316451432 (316.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643116 bytes 264736618 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643116 bytes 264736618 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685040 bytes 146760143 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878788 bytes 316460974 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643182 bytes 264746597 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643182 bytes 264746597 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685078 bytes 146766805 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878828 bytes 316465801 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685078 bytes 146766805 (146.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878828 bytes 316465801 (316.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643202 bytes 264748601 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643202 bytes 264748601 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685124 bytes 146778018 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878894 bytes 316477247 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643272 bytes 264758876 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643272 bytes 264758876 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685144 bytes 146782932 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878920 bytes 316480998 (316.4 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685144 bytes 146782932 (146.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 878920 bytes 316480998 (316.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643288 bytes 264760052 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643288 bytes 264760052 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685185 bytes 146792307 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 878978 bytes 316490494 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643352 bytes 264769887 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643352 bytes 264769887 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685205 bytes 146797267 (146.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879005 bytes 316494349 (316.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685205 bytes 146797267 (146.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879005 bytes 316494349 (316.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643368 bytes 264771063 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643368 bytes 264771063 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685264 bytes 146808562 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879080 bytes 316505337 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643449 bytes 264782400 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643449 bytes 264782400 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685285 bytes 146813651 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879106 bytes 316509127 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685285 bytes 146813651 (146.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879106 bytes 316509127 (316.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643465 bytes 264783576 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643465 bytes 264783576 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685305 bytes 146818617 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879132 bytes 316512917 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643477 bytes 264784444 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643477 bytes 264784444 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685324 bytes 146823480 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879159 bytes 316516766 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685324 bytes 146823480 (146.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879159 bytes 316516766 (316.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643495 bytes 264785740 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643495 bytes 264785740 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685344 bytes 146828460 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879186 bytes 316520615 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643519 bytes 264787396 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643519 bytes 264787396 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685377 bytes 146834793 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879227 bytes 316525567 (316.5 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685377 bytes 146834793 (146.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879227 bytes 316525567 (316.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643541 bytes 264789520 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643541 bytes 264789520 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685426 bytes 146846116 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879290 bytes 316535620 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643569 bytes 264791548 (264.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643569 bytes 264791548 (264.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685447 bytes 146851193 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879317 bytes 316539483 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685447 bytes 146851193 (146.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879317 bytes 316539483 (316.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643586 bytes 264792784 (264.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643586 bytes 264792784 (264.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685486 bytes 146860372 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879375 bytes 316549037 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643649 bytes 264802567 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643649 bytes 264802567 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685506 bytes 146865295 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879402 bytes 316552862 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685506 bytes 146865295 (146.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879402 bytes 316552862 (316.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643665 bytes 264803743 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643665 bytes 264803743 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685565 bytes 146876561 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879480 bytes 316563956 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643748 bytes 264815288 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643748 bytes 264815288 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685583 bytes 146881358 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879506 bytes 316567739 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685583 bytes 146881358 (146.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879506 bytes 316567739 (316.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643764 bytes 264816464 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643764 bytes 264816464 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685603 bytes 146886281 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879533 bytes 316571564 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643780 bytes 264817640 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643780 bytes 264817640 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685625 bytes 146891418 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879562 bytes 316575536 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685625 bytes 146891418 (146.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879562 bytes 316575536 (316.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643796 bytes 264818816 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643796 bytes 264818816 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685645 bytes 146896390 (146.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879589 bytes 316579400 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643812 bytes 264819992 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643812 bytes 264819992 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685679 bytes 146902791 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879630 bytes 316584361 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685679 bytes 146902791 (146.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879630 bytes 316584361 (316.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643837 bytes 264822296 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643837 bytes 264822296 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685715 bytes 146910454 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879670 bytes 316590526 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643865 bytes 264824252 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643865 bytes 264824252 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685736 bytes 146915474 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879701 bytes 316594670 (316.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685736 bytes 146915474 (146.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879701 bytes 316594670 (316.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643888 bytes 264825850 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643888 bytes 264825850 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685776 bytes 146924485 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879755 bytes 316602644 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 643908 bytes 264827342 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 643908 bytes 264827342 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685803 bytes 146930070 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879784 bytes 316606642 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685803 bytes 146930070 (146.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879784 bytes 316606642 (316.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 643924 bytes 264828518 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 643924 bytes 264828518 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685860 bytes 146941165 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879860 bytes 316617694 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644005 bytes 264839963 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644005 bytes 264839963 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685881 bytes 146946191 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879887 bytes 316621526 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685881 bytes 146946191 (146.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879887 bytes 316621526 (316.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644021 bytes 264841139 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644021 bytes 264841139 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685902 bytes 146951268 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879914 bytes 316625390 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644037 bytes 264842315 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644037 bytes 264842315 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685923 bytes 146956300 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879942 bytes 316629296 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685923 bytes 146956300 (146.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 879942 bytes 316629296 (316.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644053 bytes 264843491 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644053 bytes 264843491 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685945 bytes 146961472 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 879968 bytes 316633067 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644069 bytes 264844667 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644069 bytes 264844667 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 685978 bytes 146967781 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880011 bytes 316638177 (316.6 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 685978 bytes 146967781 (146.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880011 bytes 316638177 (316.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644094 bytes 264846971 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644094 bytes 264846971 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686007 bytes 146974913 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880047 bytes 316643998 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644114 bytes 264848443 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644114 bytes 264848443 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686027 bytes 146979879 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880075 bytes 316647916 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686027 bytes 146979879 (146.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880075 bytes 316647916 (316.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644135 bytes 264849919 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644135 bytes 264849919 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686048 bytes 146984950 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880103 bytes 316651834 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644157 bytes 264851455 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644157 bytes 264851455 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686068 bytes 146989873 (146.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880129 bytes 316655585 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686068 bytes 146989873 (146.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880129 bytes 316655585 (316.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644174 bytes 264852691 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644174 bytes 264852691 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686131 bytes 147001196 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880202 bytes 316665065 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644216 bytes 264856053 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644216 bytes 264856053 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686151 bytes 147006161 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880229 bytes 316668882 (316.6 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686151 bytes 147006161 (147.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880229 bytes 316668882 (316.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644232 bytes 264857229 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644232 bytes 264857229 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686171 bytes 147011115 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880257 bytes 316672800 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644248 bytes 264858405 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644248 bytes 264858405 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686192 bytes 147016175 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880286 bytes 316676799 (316.6 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686192 bytes 147016175 (147.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880286 bytes 316676799 (316.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644264 bytes 264859581 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644264 bytes 264859581 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686214 bytes 147021312 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880314 bytes 316680695 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644280 bytes 264860757 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644280 bytes 264860757 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686247 bytes 147027608 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880355 bytes 316685606 (316.6 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686247 bytes 147027608 (147.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880355 bytes 316685606 (316.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644305 bytes 264863061 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644305 bytes 264863061 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686276 bytes 147034794 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880390 bytes 316691409 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644325 bytes 264864533 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644325 bytes 264864533 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686297 bytes 147039834 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880416 bytes 316695160 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686297 bytes 147039834 (147.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880416 bytes 316695160 (316.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644346 bytes 264866009 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644346 bytes 264866009 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686317 bytes 147044837 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880443 bytes 316699043 (316.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644362 bytes 264867185 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644362 bytes 264867185 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686336 bytes 147049694 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880468 bytes 316702708 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686336 bytes 147049694 (147.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880468 bytes 316702708 (316.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644374 bytes 264868045 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644374 bytes 264868045 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686376 bytes 147056820 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880514 bytes 316708197 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644416 bytes 264871339 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644416 bytes 264871339 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686396 bytes 147061780 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880541 bytes 316712029 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686396 bytes 147061780 (147.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880541 bytes 316712029 (316.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644430 bytes 264872327 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644430 bytes 264872327 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686436 bytes 147070871 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880594 bytes 316719991 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644450 bytes 264873819 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644450 bytes 264873819 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686456 bytes 147075845 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880621 bytes 316723828 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686456 bytes 147075845 (147.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880621 bytes 316723828 (316.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644466 bytes 264874995 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644466 bytes 264874995 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686475 bytes 147080702 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880648 bytes 316727665 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644482 bytes 264876171 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644482 bytes 264876171 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686509 bytes 147087073 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880689 bytes 316732578 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686509 bytes 147087073 (147.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880689 bytes 316732578 (316.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644505 bytes 264878355 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644505 bytes 264878355 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686547 bytes 147095049 (147.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880727 bytes 316738592 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644527 bytes 264879947 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644527 bytes 264879947 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686568 bytes 147100112 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880757 bytes 316742645 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686568 bytes 147100112 (147.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880757 bytes 316742645 (316.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644547 bytes 264881363 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644547 bytes 264881363 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686588 bytes 147105078 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880784 bytes 316746496 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644564 bytes 264882599 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644564 bytes 264882599 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686611 bytes 147110324 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880814 bytes 316750576 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686611 bytes 147110324 (147.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880814 bytes 316750576 (316.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644580 bytes 264883775 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644580 bytes 264883775 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686651 bytes 147117485 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880862 bytes 316756231 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644617 bytes 264886767 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644617 bytes 264886767 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686671 bytes 147122408 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880890 bytes 316760121 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686671 bytes 147122408 (147.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880890 bytes 316760121 (316.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644633 bytes 264887943 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644633 bytes 264887943 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686694 bytes 147127605 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880920 bytes 316764134 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644654 bytes 264889419 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644654 bytes 264889419 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686716 bytes 147132734 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 880949 bytes 316768121 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686716 bytes 147132734 (147.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 880949 bytes 316768121 (316.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644672 bytes 264890715 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644672 bytes 264890715 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686755 bytes 147141678 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881001 bytes 316775968 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644692 bytes 264892207 (264.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644692 bytes 264892207 (264.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686789 bytes 147148097 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881041 bytes 316780839 (316.7 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686789 bytes 147148097 (147.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881041 bytes 316780839 (316.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644712 bytes 264894211 (264.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644712 bytes 264894211 (264.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686836 bytes 147159369 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881107 bytes 316792296 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644782 bytes 264904486 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644782 bytes 264904486 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686855 bytes 147164263 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881133 bytes 316796098 (316.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686855 bytes 147164263 (147.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881133 bytes 316796098 (316.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644798 bytes 264905662 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644798 bytes 264905662 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686893 bytes 147173329 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881188 bytes 316805413 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644864 bytes 264915641 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644864 bytes 264915641 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686914 bytes 147178361 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881216 bytes 316809318 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686914 bytes 147178361 (147.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881216 bytes 316809318 (316.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644880 bytes 264916817 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644880 bytes 264916817 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686972 bytes 147189590 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881291 bytes 316820326 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644965 bytes 264928470 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644965 bytes 264928470 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 686994 bytes 147194727 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881320 bytes 316824297 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 686994 bytes 147194727 (147.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881320 bytes 316824297 (316.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 644981 bytes 264929646 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 644981 bytes 264929646 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687015 bytes 147199747 (147.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881348 bytes 316828202 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 644997 bytes 264930822 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 644997 bytes 264930822 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687034 bytes 147204604 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881374 bytes 316831973 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687034 bytes 147204604 (147.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881374 bytes 316831973 (316.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645013 bytes 264931998 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645013 bytes 264931998 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687057 bytes 147209850 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881404 bytes 316836026 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645032 bytes 264933354 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645032 bytes 264933354 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687088 bytes 147216029 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881444 bytes 316840909 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687088 bytes 147216029 (147.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881444 bytes 316840909 (316.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645055 bytes 264935538 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645055 bytes 264935538 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687117 bytes 147223161 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881480 bytes 316846730 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645081 bytes 264937370 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645081 bytes 264937370 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687159 bytes 147232496 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881534 bytes 316854763 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687159 bytes 147232496 (147.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881534 bytes 316854763 (316.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645101 bytes 264938862 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645101 bytes 264938862 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687200 bytes 147241764 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881591 bytes 316864205 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645169 bytes 264948945 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645169 bytes 264948945 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687230 bytes 147247513 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881619 bytes 316868110 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687230 bytes 147247513 (147.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881619 bytes 316868110 (316.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645185 bytes 264950121 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645185 bytes 264950121 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687284 bytes 147258418 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881698 bytes 316879250 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645271 bytes 264961824 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645271 bytes 264961824 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687303 bytes 147263275 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881725 bytes 316883087 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687303 bytes 147263275 (147.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881725 bytes 316883087 (316.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645287 bytes 264963000 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645287 bytes 264963000 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687324 bytes 147268338 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881754 bytes 316887086 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645303 bytes 264964176 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645303 bytes 264964176 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687345 bytes 147273378 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881781 bytes 316890902 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687345 bytes 147273378 (147.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881781 bytes 316890902 (316.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645319 bytes 264965352 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645319 bytes 264965352 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687366 bytes 147278361 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881809 bytes 316894768 (316.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645335 bytes 264966528 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645335 bytes 264966528 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687400 bytes 147284717 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881849 bytes 316899587 (316.8 MBsudo: no tty present and no askpass program specified )\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645355 bytes 264968532 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645355 bytes 264968532 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687400 bytes 147284717 (147.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881849 bytes 316899587 (316.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645355 bytes 264968532 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645355 bytes 264968532 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisisudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687430 bytes 147291951 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881890 bytes 316905806 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645382 bytes 264970428 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645382 bytes 264970428 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687451 bytes 147297020 (147.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881919 bytes 316909817 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687451 bytes 147297020 (147.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881919 bytes 316909817 (316.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645401 bytes 264971710 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645401 bytes 264971710 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687473 bytes 147302112 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881946 bytes 316913637 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645423 bytes 264973246 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645423 bytes 264973246 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687519 bytes 147311594 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 881997 bytes 316921429 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687519 bytes 147311594 (147.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 881997 bytes 316921429 (316.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645443 bytes 264974738 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645443 bytes 264974738 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687578 bytes 147323070 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882078 bytes 316932785 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645525 bytes 264986133 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645525 bytes 264986133 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687598 bytes 147328024 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882106 bytes 316936703 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687598 bytes 147328024 (147.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882106 bytes 316936703 (316.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645541 bytes 264987309 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645541 bytes 264987309 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687621 bytes 147333270 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882135 bytes 316940690 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645557 bytes 264988485 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645557 bytes 264988485 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687642 bytes 147338283 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882163 bytes 316944605 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687642 bytes 147338283 (147.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882163 bytes 316944605 (316.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645573 bytes 264989661 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645573 bytes 264989661 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687662 bytes 147343206 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882191 bytes 316948496 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645589 bytes 264990837 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645589 bytes 264990837 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687696 bytes 147349619 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882232 bytes 316953421 (316.9 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687696 bytes 147349619 (147.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882232 bytes 316953421 (316.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645609 bytes 264992841 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645609 bytes 264992841 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687726 bytes 147356848 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882269 bytes 316959323 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645632 bytes 264994493 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645632 bytes 264994493 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687748 bytes 147361988 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882299 bytes 316963387 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687748 bytes 147361988 (147.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882299 bytes 316963387 (316.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645650 bytes 264995789 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645650 bytes 264995789 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687769 bytes 147367028 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882325 bytes 316967169 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645669 bytes 264997145 (264.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645669 bytes 264997145 (264.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687791 bytes 147372157 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882355 bytes 316971221 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687791 bytes 147372157 (147.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882355 bytes 316971221 (316.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645693 bytes 264998801 (264.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645693 bytes 264998801 (264.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687831 bytes 147379232 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882401 bytes 316976718 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645731 bytes 265001853 (265.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645731 bytes 265001853 (265.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687869 bytes 147388118 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882451 bytes 316984418 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687869 bytes 147388118 (147.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882451 bytes 316984418 (316.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645751 bytes 265003345 (265.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645751 bytes 265003345 (265.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687890 bytes 147393181 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882479 bytes 316988351 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645767 bytes 265004521 (265.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645767 bytes 265004521 (265.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687910 bytes 147398104 (147.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882506 bytes 316992176 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687910 bytes 147398104 (147.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882506 bytes 316992176 (316.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645783 bytes 265005697 (265.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645783 bytes 265005697 (265.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687932 bytes 147403204 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882534 bytes 316996042 (316.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645799 bytes 265006873 (265.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645799 bytes 265006873 (265.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687968 bytes 147409777 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882577 bytes 317001133 (317.0 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 687968 bytes 147409777 (147.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882577 bytes 317001133 (317.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645819 bytes 265008877 (265.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645819 bytes 265008877 (265.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 687997 bytes 147416909 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882612 bytes 317006880 (317.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645839 bytes 265010349 (265.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645839 bytes 265010349 (265.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 688020 bytes 147422118 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882641 bytes 317010828 (317.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 688020 bytes 147422118 (147.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882641 bytes 317010828 (317.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645860 bytes 265011825 (265.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645860 bytes 265011825 (265.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 688041 bytes 147427138 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882668 bytes 317014660 (317.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645876 bytes 265013001 (265.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645876 bytes 265013001 (265.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 688062 bytes 147432170 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882697 bytes 317018632 (317.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 688062 bytes 147432170 (147.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882697 bytes 317018632 (317.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645897 bytes 265014477 (265.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645897 bytes 265014477 (265.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 688103 bytes 147439344 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882747 bytes 317024225 (317.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645935 bytes 265017521 (265.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645935 bytes 265017521 (265.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 688122 bytes 147444201 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882773 bytes 317027996 (317.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 688122 bytes 147444201 (147.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882773 bytes 317027996 (317.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645957 bytes 265019057 (265.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645957 bytes 265019057 (265.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 688144 bytes 147449330 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882802 bytes 317031983 (317.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645974 bytes 265020293 (265.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645974 bytes 265020293 (265.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 688183 bytes 147458273 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882854 bytes 317039815 (317.0 MBsudo: no tty present and no askpass program specified )\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 645994 bytes 265021785 (265.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 645994 bytes 265021785 (265.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 688183 bytes 147458273 (147.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882854 bytes 317039815 (317.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 645994 bytes 265021785 (265.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 645994 bytes 265021785 (265.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisisudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 688221 bytes 147467309 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882912 bytes 317049237 (317.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 646057 bytes 265031568 (265.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 646057 bytes 265031568 (265.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 688256 bytes 147473789 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 882954 bytes 317054231 (317.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 688256 bytes 147473789 (147.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 882954 bytes 317054231 (317.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 646077 bytes 265033572 (265.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 646077 bytes 265033572 (265.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 688305 bytes 147485411 (147.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 883022 bytes 317065754 (317.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 646144 bytes 265043651 (265.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 646144 bytes 265043651 (265.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689076 bytes 147541241 (147.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 883732 bytes 319960026 (319.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689076 bytes 147541241 (147.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 883732 bytes 319960026 (319.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 646460 bytes 267933966 (267.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 646460 bytes 267933966 (267.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689113 bytes 147550258 (147.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 883788 bytes 319969395 (319.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 646523 bytes 267943749 (267.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 646523 bytes 267943749 (267.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689134 bytes 147555347 (147.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 883815 bytes 319973251 (319.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689134 bytes 147555347 (147.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 883815 bytes 319973251 (319.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 646544 bytes 267945225 (267.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 646544 bytes 267945225 (267.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689201 bytes 147567225 (147.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 883894 bytes 319984593 (319.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 646628 bytes 267956824 (267.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 646628 bytes 267956824 (267.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689220 bytes 147572073 (147.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 883922 bytes 319988483 (319.9 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689220 bytes 147572073 (147.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 883922 bytes 319988483 (319.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 646644 bytes 267958000 (267.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 646644 bytes 267958000 (267.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689240 bytes 147577047 (147.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 883947 bytes 319992180 (319.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 646660 bytes 267959176 (267.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 646660 bytes 267959176 (267.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689258 bytes 147581844 (147.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 883972 bytes 319995909 (319.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689258 bytes 147581844 (147.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 883972 bytes 319995909 (319.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 646681 bytes 267960652 (267.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 646681 bytes 267960652 (267.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689281 bytes 147587002 (147.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 883999 bytes 319999709 (319.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 646699 bytes 267961948 (267.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 646699 bytes 267961948 (267.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689336 bytes 147597615 (147.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884066 bytes 320008735 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689336 bytes 147597615 (147.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884066 bytes 320008735 (320.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 646723 bytes 267964268 (267.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 646723 bytes 267964268 (267.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689381 bytes 147608749 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884129 bytes 320019964 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 646787 bytes 267974083 (267.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 646787 bytes 267974083 (267.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689402 bytes 147613756 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884158 bytes 320023933 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689402 bytes 147613756 (147.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884158 bytes 320023933 (320.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 646808 bytes 267975559 (267.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 646808 bytes 267975559 (267.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689440 bytes 147622951 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884214 bytes 320033351 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 646865 bytes 267984930 (267.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 646865 bytes 267984930 (267.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689460 bytes 147627923 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884242 bytes 320037305 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689460 bytes 147627923 (147.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884242 bytes 320037305 (320.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 646885 bytes 267986346 (267.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 646885 bytes 267986346 (267.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689516 bytes 147639013 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884318 bytes 320048471 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 646969 bytes 267997953 (267.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 646969 bytes 267997953 (267.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689536 bytes 147643993 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884344 bytes 320052253 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689536 bytes 147643993 (147.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884344 bytes 320052253 (320.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 646985 bytes 267999129 (267.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 646985 bytes 267999129 (267.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689556 bytes 147648996 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884372 bytes 320056210 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647001 bytes 268000305 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647001 bytes 268000305 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689575 bytes 147653859 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884398 bytes 320059993 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689575 bytes 147653859 (147.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884398 bytes 320059993 (320.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647017 bytes 268001481 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647017 bytes 268001481 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689597 bytes 147658996 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884427 bytes 320063964 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647033 bytes 268002657 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647033 bytes 268002657 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689629 bytes 147665235 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884467 bytes 320068823 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689629 bytes 147665235 (147.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884467 bytes 320068823 (320.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647057 bytes 268004901 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647057 bytes 268004901 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689660 bytes 147672578 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884506 bytes 320074889 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647080 bytes 268006553 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647080 bytes 268006553 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689681 bytes 147677661 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884533 bytes 320078741 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689681 bytes 147677661 (147.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884533 bytes 320078741 (320.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647096 bytes 268007729 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647096 bytes 268007729 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689737 bytes 147690656 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884612 bytes 320092003 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647168 bytes 268018128 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647168 bytes 268018128 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689758 bytes 147695645 (147.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884639 bytes 320095828 (320.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689758 bytes 147695645 (147.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884639 bytes 320095828 (320.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647184 bytes 268019304 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647184 bytes 268019304 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689817 bytes 147706961 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884719 bytes 320107043 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647272 bytes 268031153 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647272 bytes 268031153 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689839 bytes 147712096 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884748 bytes 320111030 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689839 bytes 147712096 (147.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884748 bytes 320111030 (320.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647288 bytes 268032329 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647288 bytes 268032329 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689860 bytes 147717128 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884776 bytes 320114935 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647304 bytes 268033505 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647304 bytes 268033505 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689880 bytes 147722102 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884804 bytes 320118825 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689880 bytes 147722102 (147.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884804 bytes 320118825 (320.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647320 bytes 268034681 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647320 bytes 268034681 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689907 bytes 147727548 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884832 bytes 320122730 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647336 bytes 268035857 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647336 bytes 268035857 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689942 bytes 147734016 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884873 bytes 320127649 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689942 bytes 147734016 (147.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884873 bytes 320127649 (320.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647356 bytes 268037861 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647356 bytes 268037861 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689972 bytes 147741265 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884913 bytes 320133814 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647378 bytes 268039457 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647378 bytes 268039457 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 689991 bytes 147746162 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884941 bytes 320137788 (320.1 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 689991 bytes 147746162 (147.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884941 bytes 320137788 (320.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647395 bytes 268040695 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647395 bytes 268040695 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690010 bytes 147751019 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884967 bytes 320141559 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647422 bytes 268042531 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647422 bytes 268042531 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690031 bytes 147756059 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 884995 bytes 320145450 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690031 bytes 147756059 (147.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 884995 bytes 320145450 (320.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647439 bytes 268043767 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647439 bytes 268043767 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690088 bytes 147766974 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885065 bytes 320154864 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647485 bytes 268047373 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647485 bytes 268047373 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690110 bytes 147772153 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885095 bytes 320158963 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690110 bytes 147772153 (147.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885095 bytes 320158963 (320.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647501 bytes 268048549 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647501 bytes 268048549 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690132 bytes 147777302 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885123 bytes 320162869 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647517 bytes 268049725 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647517 bytes 268049725 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690153 bytes 147782365 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885152 bytes 320166868 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690153 bytes 147782365 (147.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885152 bytes 320166868 (320.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647533 bytes 268050901 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647533 bytes 268050901 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690175 bytes 147787451 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885180 bytes 320170774 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647549 bytes 268052077 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647549 bytes 268052077 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690210 bytes 147793939 (147.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885221 bytes 320175687 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690210 bytes 147793939 (147.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885221 bytes 320175687 (320.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647569 bytes 268054081 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647569 bytes 268054081 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690240 bytes 147801180 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885257 bytes 320181515 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647589 bytes 268055553 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647589 bytes 268055553 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690260 bytes 147806103 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885283 bytes 320185266 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690260 bytes 147806103 (147.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885283 bytes 320185266 (320.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647605 bytes 268056729 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647605 bytes 268056729 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690283 bytes 147811281 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885310 bytes 320189090 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647626 bytes 268058205 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647626 bytes 268058205 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690304 bytes 147816343 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885339 bytes 320193086 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690304 bytes 147816343 (147.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885339 bytes 320193086 (320.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647642 bytes 268059381 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647642 bytes 268059381 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690343 bytes 147823352 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885384 bytes 320198508 (320.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647690 bytes 268063033 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647690 bytes 268063033 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690364 bytes 147828435 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885413 bytes 320202480 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690364 bytes 147828435 (147.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885413 bytes 320202480 (320.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647707 bytes 268064269 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647707 bytes 268064269 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690404 bytes 147837513 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885465 bytes 320210389 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647727 bytes 268065761 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647727 bytes 268065761 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690423 bytes 147842419 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885491 bytes 320214191 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690423 bytes 147842419 (147.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885491 bytes 320214191 (320.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647743 bytes 268066937 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647743 bytes 268066937 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690444 bytes 147847453 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885516 bytes 320217888 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647759 bytes 268068113 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647759 bytes 268068113 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690477 bytes 147853807 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885555 bytes 320222680 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690477 bytes 147853807 (147.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885555 bytes 320222680 (320.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647775 bytes 268069801 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647775 bytes 268069801 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690507 bytes 147861090 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885591 bytes 320228564 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647795 bytes 268071273 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647795 bytes 268071273 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690525 bytes 147865935 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885615 bytes 320232219 (320.2 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690525 bytes 147865935 (147.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885615 bytes 320232219 (320.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647807 bytes 268072141 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647807 bytes 268072141 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690544 bytes 147870798 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885642 bytes 320236068 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647827 bytes 268073557 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647827 bytes 268073557 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690564 bytes 147875758 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885669 bytes 320239932 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690564 bytes 147875758 (147.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885669 bytes 320239932 (320.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647844 bytes 268074793 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647844 bytes 268074793 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690605 bytes 147882987 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885719 bytes 320245564 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647886 bytes 268078079 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647886 bytes 268078079 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690625 bytes 147887953 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885746 bytes 320249416 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690625 bytes 147887953 (147.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885746 bytes 320249416 (320.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647903 bytes 268079315 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647903 bytes 268079315 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690646 bytes 147892985 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885775 bytes 320253387 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647925 bytes 268080851 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647925 bytes 268080851 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690666 bytes 147897959 (147.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885802 bytes 320257211 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690666 bytes 147897959 (147.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885802 bytes 320257211 (320.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647942 bytes 268082087 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647942 bytes 268082087 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690704 bytes 147906831 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885853 bytes 320265004 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 647962 bytes 268083579 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 647962 bytes 268083579 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690738 bytes 147913202 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885894 bytes 320269917 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690738 bytes 147913202 (147.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885894 bytes 320269917 (320.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 647982 bytes 268085583 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 647982 bytes 268085583 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690787 bytes 147924772 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885963 bytes 320281552 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648050 bytes 268095714 (268.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648050 bytes 268095714 (268.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690808 bytes 147929804 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 885992 bytes 320285524 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690808 bytes 147929804 (147.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 885992 bytes 320285524 (320.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648066 bytes 268096890 (268.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648066 bytes 268096890 (268.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690848 bytes 147939031 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886047 bytes 320294863 (320.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648128 bytes 268106621 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648128 bytes 268106621 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690869 bytes 147944099 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886074 bytes 320298727 (320.2 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690869 bytes 147944099 (147.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886074 bytes 320298727 (320.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648149 bytes 268108097 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648149 bytes 268108097 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690929 bytes 147955491 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886155 bytes 320309999 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648235 bytes 268119802 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648235 bytes 268119802 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690951 bytes 147960626 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886184 bytes 320313957 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690951 bytes 147960626 (147.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886184 bytes 320313957 (320.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648256 bytes 268121278 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648256 bytes 268121278 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690975 bytes 147965951 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886215 bytes 320318071 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648272 bytes 268122454 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648272 bytes 268122454 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 690995 bytes 147970905 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886243 bytes 320321989 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 690995 bytes 147970905 (147.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886243 bytes 320321989 (320.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648288 bytes 268123630 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648288 bytes 268123630 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691015 bytes 147975828 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886270 bytes 320325806 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648309 bytes 268125106 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648309 bytes 268125106 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691050 bytes 147982310 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886311 bytes 320330707 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691050 bytes 147982310 (147.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886311 bytes 320330707 (320.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648331 bytes 268127230 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648331 bytes 268127230 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691100 bytes 147993661 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886372 bytes 320340537 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648355 bytes 268129018 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648355 bytes 268129018 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691118 bytes 147998386 (147.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886399 bytes 320344354 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691118 bytes 147998386 (147.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886399 bytes 320344354 (320.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648371 bytes 268130194 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648371 bytes 268130194 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691156 bytes 148007539 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886455 bytes 320353762 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648432 bytes 268139873 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648432 bytes 268139873 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691178 bytes 148012668 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886484 bytes 320357749 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691178 bytes 148012668 (148.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886484 bytes 320357749 (320.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648453 bytes 268141349 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648453 bytes 268141349 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691236 bytes 148023895 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886566 bytes 320369086 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648539 bytes 268153054 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648539 bytes 268153054 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691258 bytes 148029044 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886594 bytes 320372991 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691258 bytes 148029044 (148.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886594 bytes 320372991 (320.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648560 bytes 268154530 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648560 bytes 268154530 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691276 bytes 148033835 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886621 bytes 320376827 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648576 bytes 268155706 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648576 bytes 268155706 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691296 bytes 148038749 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886649 bytes 320380718 (320.3 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691296 bytes 148038749 (148.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886649 bytes 320380718 (320.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648592 bytes 268156882 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648592 bytes 268156882 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691317 bytes 148043820 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886676 bytes 320384550 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648608 bytes 268158058 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648608 bytes 268158058 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691351 bytes 148050191 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886717 bytes 320389463 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691351 bytes 148050191 (148.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886717 bytes 320389463 (320.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648628 bytes 268160062 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648628 bytes 268160062 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691381 bytes 148057456 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886754 bytes 320395393 (320.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648652 bytes 268161774 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648652 bytes 268161774 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691403 bytes 148062601 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886783 bytes 320399382 (320.3 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691403 bytes 148062601 (148.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886783 bytes 320399382 (320.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648671 bytes 268163130 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648671 bytes 268163130 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691444 bytes 148071809 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886837 bytes 320407416 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648691 bytes 268164622 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648691 bytes 268164622 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691464 bytes 148076763 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886863 bytes 320411194 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691464 bytes 148076763 (148.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886863 bytes 320411194 (320.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648712 bytes 268166098 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648712 bytes 268166098 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691524 bytes 148088163 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886942 bytes 320422343 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648797 bytes 268177751 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648797 bytes 268177751 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691544 bytes 148093080 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886969 bytes 320426148 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691544 bytes 148093080 (148.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 886969 bytes 320426148 (320.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648818 bytes 268179227 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648818 bytes 268179227 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691565 bytes 148098106 (148.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 886996 bytes 320429968 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648834 bytes 268180403 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648834 bytes 268180403 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691587 bytes 148103286 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887024 bytes 320433893 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691587 bytes 148103286 (148.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887024 bytes 320433893 (320.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648850 bytes 268181579 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648850 bytes 268181579 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691607 bytes 148108240 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887051 bytes 320437692 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648862 bytes 268182439 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648862 bytes 268182439 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691640 bytes 148114542 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887090 bytes 320442489 (320.4 MBsudo: no tty present and no askpass program specified )\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648882 bytes 268184443 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648882 bytes 268184443 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691640 bytes 148114542 (148.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887090 bytes 320442489 (320.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648882 bytes 268184443 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648882 bytes 268184443 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisisudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691669 bytes 148121722 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887130 bytes 320448646 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648900 bytes 268185731 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648900 bytes 268185731 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691688 bytes 148126579 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887159 bytes 320452655 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691688 bytes 148126579 (148.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887159 bytes 320452655 (320.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648917 bytes 268186969 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648917 bytes 268186969 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691709 bytes 148131611 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887188 bytes 320456627 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648936 bytes 268188325 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648936 bytes 268188325 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691731 bytes 148136748 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887216 bytes 320460533 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691731 bytes 148136748 (148.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887216 bytes 320460533 (320.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 648958 bytes 268189861 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 648958 bytes 268189861 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691772 bytes 148143971 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887266 bytes 320466238 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 648998 bytes 268193033 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 648998 bytes 268193033 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691809 bytes 148152734 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887318 bytes 320474058 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691809 bytes 148152734 (148.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887318 bytes 320474058 (320.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649022 bytes 268194765 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649022 bytes 268194765 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691830 bytes 148157774 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887345 bytes 320477882 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649039 bytes 268196001 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649039 bytes 268196001 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691852 bytes 148162922 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887374 bytes 320481887 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691852 bytes 148162922 (148.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887374 bytes 320481887 (320.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649055 bytes 268197177 (268.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649055 bytes 268197177 (268.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691874 bytes 148168051 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887404 bytes 320485940 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649071 bytes 268198353 (268.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649071 bytes 268198353 (268.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691910 bytes 148174648 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887446 bytes 320490934 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691910 bytes 148174648 (148.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887446 bytes 320490934 (320.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649091 bytes 268200357 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649091 bytes 268200357 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691939 bytes 148181780 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887483 bytes 320496821 (320.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649111 bytes 268201829 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649111 bytes 268201829 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691958 bytes 148186637 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887510 bytes 320500658 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 691958 bytes 148186637 (148.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887510 bytes 320500658 (320.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649127 bytes 268203005 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649127 bytes 268203005 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 691980 bytes 148191737 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887537 bytes 320504482 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649143 bytes 268204181 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649143 bytes 268204181 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692000 bytes 148196691 (148.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887564 bytes 320508334 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692000 bytes 148196691 (148.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887564 bytes 320508334 (320.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649159 bytes 268205357 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649159 bytes 268205357 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692042 bytes 148204008 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887613 bytes 320514073 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649201 bytes 268208649 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649201 bytes 268208649 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692063 bytes 148209048 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887641 bytes 320517964 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692063 bytes 148209048 (148.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887641 bytes 320517964 (320.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649223 bytes 268210185 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649223 bytes 268210185 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692083 bytes 148213971 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887668 bytes 320521781 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649245 bytes 268211721 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649245 bytes 268211721 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692120 bytes 148222740 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887718 bytes 320529493 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692120 bytes 148222740 (148.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887718 bytes 320529493 (320.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649265 bytes 268213213 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649265 bytes 268213213 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692160 bytes 148232006 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887775 bytes 320538940 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649329 bytes 268223048 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649329 bytes 268223048 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692195 bytes 148238517 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887816 bytes 320543887 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692195 bytes 148238517 (148.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887816 bytes 320543887 (320.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649349 bytes 268225052 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649349 bytes 268225052 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692244 bytes 148249972 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887883 bytes 320555411 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649417 bytes 268235183 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649417 bytes 268235183 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692264 bytes 148254946 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887909 bytes 320559182 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692264 bytes 148254946 (148.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887909 bytes 320559182 (320.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649433 bytes 268236359 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649433 bytes 268236359 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692303 bytes 148264105 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887967 bytes 320568660 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649496 bytes 268246142 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649496 bytes 268246142 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692324 bytes 148269137 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 887996 bytes 320572632 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692324 bytes 148269137 (148.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 887996 bytes 320572632 (320.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649512 bytes 268247318 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649512 bytes 268247318 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692385 bytes 148280595 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888074 bytes 320583883 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649601 bytes 268259217 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649601 bytes 268259217 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692407 bytes 148285747 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888101 bytes 320587735 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692407 bytes 148285747 (148.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888101 bytes 320587735 (320.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649617 bytes 268260393 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649617 bytes 268260393 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692423 bytes 148290346 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888125 bytes 320591390 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649638 bytes 268261869 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649638 bytes 268261869 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692444 bytes 148295435 (148.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888153 bytes 320595320 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692444 bytes 148295435 (148.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888153 bytes 320595320 (320.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649660 bytes 268263405 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649660 bytes 268263405 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692464 bytes 148300389 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888180 bytes 320599172 (320.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649677 bytes 268264641 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649677 bytes 268264641 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692518 bytes 148310885 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888246 bytes 320608133 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692518 bytes 148310885 (148.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888246 bytes 320608133 (320.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649701 bytes 268266961 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649701 bytes 268266961 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692570 bytes 148322612 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888312 bytes 320619607 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649768 bytes 268277040 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649768 bytes 268277040 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692591 bytes 148327644 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888341 bytes 320623578 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692591 bytes 148327644 (148.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888341 bytes 320623578 (320.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649784 bytes 268278216 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649784 bytes 268278216 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692630 bytes 148336793 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888397 bytes 320632927 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649848 bytes 268288051 (268.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649848 bytes 268288051 (268.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692652 bytes 148341930 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888425 bytes 320636833 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692652 bytes 148341930 (148.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888425 bytes 320636833 (320.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649864 bytes 268289227 (268.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649864 bytes 268289227 (268.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692711 bytes 148353224 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888501 bytes 320647915 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649953 bytes 268301128 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649953 bytes 268301128 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692729 bytes 148358021 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888527 bytes 320651710 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692729 bytes 148358021 (148.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888527 bytes 320651710 (320.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 649969 bytes 268302304 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 649969 bytes 268302304 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692749 bytes 148363087 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888552 bytes 320655425 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 649986 bytes 268303464 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 649986 bytes 268303464 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692770 bytes 148368061 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888579 bytes 320659210 (320.6 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692770 bytes 148368061 (148.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888579 bytes 320659210 (320.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650002 bytes 268304640 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650002 bytes 268304640 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692790 bytes 148373071 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888607 bytes 320663154 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650014 bytes 268305508 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650014 bytes 268305508 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692826 bytes 148379668 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888649 bytes 320668148 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692826 bytes 148379668 (148.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888649 bytes 320668148 (320.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650039 bytes 268307812 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650039 bytes 268307812 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692856 bytes 148386949 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888686 bytes 320674064 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650061 bytes 268309404 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650061 bytes 268309404 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692893 bytes 148395718 (148.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888736 bytes 320681763 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692893 bytes 148395718 (148.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888736 bytes 320681763 (320.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650081 bytes 268310896 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650081 bytes 268310896 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692935 bytes 148405153 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888796 bytes 320691364 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650145 bytes 268320731 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650145 bytes 268320731 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 692957 bytes 148410276 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888825 bytes 320695339 (320.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 692957 bytes 148410276 (148.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888825 bytes 320695339 (320.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650161 bytes 268321907 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650161 bytes 268321907 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693014 bytes 148421421 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888903 bytes 320706530 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650246 bytes 268333572 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650246 bytes 268333572 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693035 bytes 148426503 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888932 bytes 320710513 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693035 bytes 148426503 (148.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888932 bytes 320710513 (320.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650265 bytes 268334928 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650265 bytes 268334928 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693055 bytes 148431426 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888960 bytes 320714404 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650284 bytes 268336284 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650284 bytes 268336284 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693075 bytes 148436392 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 888987 bytes 320718256 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693075 bytes 148436392 (148.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 888987 bytes 320718256 (320.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650302 bytes 268337580 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650302 bytes 268337580 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693105 bytes 148442081 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889016 bytes 320722228 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650318 bytes 268338756 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650318 bytes 268338756 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693139 bytes 148448452 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889058 bytes 320727207 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693139 bytes 148448452 (148.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889058 bytes 320727207 (320.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650338 bytes 268340760 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650338 bytes 268340760 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693170 bytes 148455833 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889094 bytes 320733040 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650358 bytes 268342232 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650358 bytes 268342232 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693187 bytes 148460492 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889120 bytes 320736811 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693187 bytes 148460492 (148.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889120 bytes 320736811 (320.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650379 bytes 268343708 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650379 bytes 268343708 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693208 bytes 148465524 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889148 bytes 320740716 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650397 bytes 268345004 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650397 bytes 268345004 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693249 bytes 148474630 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889203 bytes 320748767 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693249 bytes 148474630 (148.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889203 bytes 320748767 (320.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650417 bytes 268346496 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650417 bytes 268346496 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693309 bytes 148486000 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889283 bytes 320759982 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650501 bytes 268358097 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650501 bytes 268358097 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693329 bytes 148490923 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889309 bytes 320763733 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693329 bytes 148490923 (148.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889309 bytes 320763733 (320.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650522 bytes 268359573 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650522 bytes 268359573 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693349 bytes 148495846 (148.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889336 bytes 320767558 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650538 bytes 268360749 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650538 bytes 268360749 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693371 bytes 148501026 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889365 bytes 320771557 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693371 bytes 148501026 (148.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889365 bytes 320771557 (320.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650559 bytes 268362225 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650559 bytes 268362225 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693392 bytes 148506039 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889393 bytes 320775464 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650575 bytes 268363401 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650575 bytes 268363401 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693426 bytes 148512410 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889434 bytes 320780377 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693426 bytes 148512410 (148.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889434 bytes 320780377 (320.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650595 bytes 268365405 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650595 bytes 268365405 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693456 bytes 148519690 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889472 bytes 320786397 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650616 bytes 268366939 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650616 bytes 268366939 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693477 bytes 148524722 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889504 bytes 320790647 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693477 bytes 148524722 (148.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889504 bytes 320790647 (320.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650634 bytes 268368239 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650634 bytes 268368239 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693500 bytes 148529960 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889531 bytes 320794472 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650650 bytes 268369415 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650650 bytes 268369415 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693518 bytes 148534685 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889559 bytes 320798363 (320.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693518 bytes 148534685 (148.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889559 bytes 320798363 (320.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650670 bytes 268370831 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650670 bytes 268370831 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693560 bytes 148542023 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889608 bytes 320804083 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650710 bytes 268374003 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650710 bytes 268374003 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693579 bytes 148546880 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889634 bytes 320807845 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693579 bytes 148546880 (148.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889634 bytes 320807845 (320.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650731 bytes 268375479 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650731 bytes 268375479 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693656 bytes 148562322 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889733 bytes 320822709 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650811 bytes 268386888 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650811 bytes 268386888 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693677 bytes 148567342 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889762 bytes 320826681 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693677 bytes 148567342 (148.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889762 bytes 320826681 (320.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650832 bytes 268388364 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650832 bytes 268388364 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693698 bytes 148572381 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889790 bytes 320830598 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650848 bytes 268389540 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650848 bytes 268389540 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693733 bytes 148578912 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889832 bytes 320835604 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693733 bytes 148578912 (148.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889832 bytes 320835604 (320.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650868 bytes 268391544 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650868 bytes 268391544 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693765 bytes 148586254 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889866 bytes 320841297 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650888 bytes 268393016 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650888 bytes 268393016 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693784 bytes 148591111 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889892 bytes 320845068 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693784 bytes 148591111 (148.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889892 bytes 320845068 (320.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650904 bytes 268394192 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650904 bytes 268394192 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693805 bytes 148596182 (148.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889919 bytes 320848920 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650920 bytes 268395368 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650920 bytes 268395368 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693826 bytes 148601202 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889946 bytes 320852744 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693826 bytes 148601202 (148.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 889946 bytes 320852744 (320.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650936 bytes 268396544 (268.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650936 bytes 268396544 (268.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693868 bytes 148608434 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 889998 bytes 320858464 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 650974 bytes 268399588 (268.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 650974 bytes 268399588 (268.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693888 bytes 148613414 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890024 bytes 320862215 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693888 bytes 148613414 (148.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890024 bytes 320862215 (320.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 650991 bytes 268400748 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 650991 bytes 268400748 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693910 bytes 148618554 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890052 bytes 320866138 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651013 bytes 268402284 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651013 bytes 268402284 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693930 bytes 148623477 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890078 bytes 320869888 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 693930 bytes 148623477 (148.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890078 bytes 320869888 (320.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651035 bytes 268403820 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651035 bytes 268403820 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 693967 bytes 148632303 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890129 bytes 320877634 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651051 bytes 268405004 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651051 bytes 268405004 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694001 bytes 148638705 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890170 bytes 320882574 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694001 bytes 148638705 (148.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890170 bytes 320882574 (320.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651071 bytes 268407008 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651071 bytes 268407008 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694051 bytes 148650232 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890237 bytes 320894074 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651138 bytes 268417087 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651138 bytes 268417087 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694070 bytes 148655146 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890263 bytes 320897857 (320.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694070 bytes 148655146 (148.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890263 bytes 320897857 (320.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651154 bytes 268418263 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651154 bytes 268418263 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694107 bytes 148664169 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890318 bytes 320907184 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651218 bytes 268428098 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651218 bytes 268428098 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694127 bytes 148669129 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890345 bytes 320911048 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694127 bytes 148669129 (148.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890345 bytes 320911048 (320.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651234 bytes 268429274 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651234 bytes 268429274 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694188 bytes 148680656 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890428 bytes 320922474 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651318 bytes 268440873 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651318 bytes 268440873 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694208 bytes 148685628 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890456 bytes 320926403 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694208 bytes 148685628 (148.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890456 bytes 320926403 (320.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651334 bytes 268442049 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651334 bytes 268442049 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694228 bytes 148690551 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890483 bytes 320930227 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651355 bytes 268443525 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651355 bytes 268443525 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694250 bytes 148695688 (148.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890511 bytes 320934133 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651373 bytes 268444821 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651373 bytes 268444821 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694250 bytes 148695688 (148.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890511 bytes 320934133 (320.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651373 bytes 268444821 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651373 bytes 268444821 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ethsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694269 bytes 148700536 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890538 bytes 320937970 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651398 bytes 268446537 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651398 bytes 268446537 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694304 bytes 148707022 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890580 bytes 320942964 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694304 bytes 148707022 (148.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890580 bytes 320942964 (320.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651419 bytes 268448601 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651419 bytes 268448601 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694352 bytes 148718226 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890640 bytes 320952753 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651443 bytes 268450389 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651443 bytes 268450389 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694373 bytes 148723209 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890669 bytes 320956685 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694373 bytes 148723209 (148.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890669 bytes 320956685 (320.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651459 bytes 268451565 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651459 bytes 268451565 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694413 bytes 148732449 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890726 bytes 320966170 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651520 bytes 268461244 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651520 bytes 268461244 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694433 bytes 148737429 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890753 bytes 320970019 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694433 bytes 148737429 (148.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890753 bytes 320970019 (320.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651536 bytes 268462420 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651536 bytes 268462420 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694494 bytes 148748881 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890834 bytes 320981259 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651622 bytes 268474125 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651622 bytes 268474125 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694513 bytes 148753738 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890860 bytes 320985030 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694513 bytes 148753738 (148.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890860 bytes 320985030 (320.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651638 bytes 268475301 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651638 bytes 268475301 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694533 bytes 148758749 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890886 bytes 320988831 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651659 bytes 268476777 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651659 bytes 268476777 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694554 bytes 148763818 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890913 bytes 320992694 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694554 bytes 148763818 (148.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890913 bytes 320992694 (320.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651675 bytes 268477953 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651675 bytes 268477953 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694574 bytes 148768784 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890941 bytes 320996612 (320.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651696 bytes 268479429 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651696 bytes 268479429 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694610 bytes 148775382 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 890983 bytes 321001613 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694610 bytes 148775382 (148.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 890983 bytes 321001613 (321.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651716 bytes 268481433 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651716 bytes 268481433 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694641 bytes 148782683 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891020 bytes 321007515 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651742 bytes 268483265 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651742 bytes 268483265 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694661 bytes 148787649 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891048 bytes 321011421 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694661 bytes 148787649 (148.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891048 bytes 321011421 (321.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651759 bytes 268484501 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651759 bytes 268484501 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694700 bytes 148796682 (148.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891102 bytes 321019446 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651779 bytes 268485993 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651779 bytes 268485993 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694719 bytes 148801539 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891128 bytes 321023216 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694719 bytes 148801539 (148.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891128 bytes 321023216 (321.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651795 bytes 268487169 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651795 bytes 268487169 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694775 bytes 148812624 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891202 bytes 321034182 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651878 bytes 268498716 (268.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651878 bytes 268498716 (268.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694795 bytes 148817598 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891228 bytes 321037953 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694795 bytes 148817598 (148.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891228 bytes 321037953 (321.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651894 bytes 268499892 (268.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651894 bytes 268499892 (268.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694816 bytes 148822672 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891255 bytes 321041823 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651915 bytes 268501368 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651915 bytes 268501368 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694836 bytes 148827595 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891282 bytes 321045648 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694836 bytes 148827595 (148.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891282 bytes 321045648 (321.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651931 bytes 268502544 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651931 bytes 268502544 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694858 bytes 148832775 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891311 bytes 321049646 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651952 bytes 268504020 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651952 bytes 268504020 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694892 bytes 148839146 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891351 bytes 321054484 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694892 bytes 148839146 (148.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891351 bytes 321054484 (321.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 651972 bytes 268506024 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 651972 bytes 268506024 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694921 bytes 148846278 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891387 bytes 321060305 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 651992 bytes 268507496 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 651992 bytes 268507496 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694941 bytes 148851301 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891414 bytes 321064157 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694941 bytes 148851301 (148.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891414 bytes 321064157 (321.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652008 bytes 268508672 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652008 bytes 268508672 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694961 bytes 148856273 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891439 bytes 321067873 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652029 bytes 268510148 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652029 bytes 268510148 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 694980 bytes 148861167 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891465 bytes 321071675 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 694980 bytes 148861167 (148.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891465 bytes 321071675 (321.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652047 bytes 268511444 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652047 bytes 268511444 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695040 bytes 148872529 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891536 bytes 321081325 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652084 bytes 268514436 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652084 bytes 268514436 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695059 bytes 148877392 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891561 bytes 321085034 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695059 bytes 148877392 (148.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891561 bytes 321085034 (321.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652100 bytes 268515612 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652100 bytes 268515612 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695077 bytes 148882195 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891585 bytes 321088669 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652116 bytes 268516720 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652116 bytes 268516720 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695097 bytes 148887175 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891612 bytes 321092518 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695097 bytes 148887175 (148.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891612 bytes 321092518 (321.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652133 bytes 268517956 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652133 bytes 268517956 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695117 bytes 148892178 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891640 bytes 321096474 (321.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652153 bytes 268519372 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652153 bytes 268519372 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695149 bytes 148898423 (148.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891680 bytes 321101356 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695149 bytes 148898423 (148.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891680 bytes 321101356 (321.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652174 bytes 268521436 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652174 bytes 268521436 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695180 bytes 148905818 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891721 bytes 321107641 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652196 bytes 268523032 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652196 bytes 268523032 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695199 bytes 148910681 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891749 bytes 321111596 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695199 bytes 148910681 (148.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891749 bytes 321111596 (321.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652213 bytes 268524270 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652213 bytes 268524270 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695219 bytes 148915653 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891777 bytes 321115525 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652229 bytes 268525446 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652229 bytes 268525446 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695241 bytes 148920802 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891806 bytes 321119496 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695241 bytes 148920802 (148.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891806 bytes 321119496 (321.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652245 bytes 268526622 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652245 bytes 268526622 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695280 bytes 148927811 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891853 bytes 321125047 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652286 bytes 268529856 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652286 bytes 268529856 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695305 bytes 148933306 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891883 bytes 321129119 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695305 bytes 148933306 (148.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891883 bytes 321129119 (321.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652305 bytes 268531212 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652305 bytes 268531212 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695344 bytes 148942153 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891937 bytes 321137059 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652325 bytes 268532704 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652325 bytes 268532704 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695365 bytes 148947185 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 891966 bytes 321141031 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695365 bytes 148947185 (148.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 891966 bytes 321141031 (321.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652346 bytes 268534180 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652346 bytes 268534180 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695403 bytes 148956230 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892024 bytes 321150520 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652409 bytes 268543963 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652409 bytes 268543963 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695445 bytes 148963279 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892067 bytes 321155626 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695445 bytes 148963279 (148.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892067 bytes 321155626 (321.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652434 bytes 268546267 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652434 bytes 268546267 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695495 bytes 148974805 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892135 bytes 321167207 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652501 bytes 268556346 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652501 bytes 268556346 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695517 bytes 148979934 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892165 bytes 321171259 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695517 bytes 148979934 (148.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892165 bytes 321171259 (321.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652517 bytes 268557522 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652517 bytes 268557522 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695557 bytes 148989243 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892221 bytes 321180667 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652581 bytes 268567357 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652581 bytes 268567357 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695575 bytes 148994040 (148.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892245 bytes 321184322 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695575 bytes 148994040 (148.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892245 bytes 321184322 (321.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652597 bytes 268568533 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652597 bytes 268568533 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695633 bytes 149005225 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892321 bytes 321195405 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652681 bytes 268580132 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652681 bytes 268580132 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695655 bytes 149010362 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892349 bytes 321199311 (321.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695655 bytes 149010362 (149.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892349 bytes 321199311 (321.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652697 bytes 268581308 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652697 bytes 268581308 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695674 bytes 149015219 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892375 bytes 321203074 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652714 bytes 268582544 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652714 bytes 268582544 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695695 bytes 149020290 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892404 bytes 321207096 (321.2 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695695 bytes 149020290 (149.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892404 bytes 321207096 (321.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652740 bytes 268584320 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652740 bytes 268584320 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695717 bytes 149025439 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892433 bytes 321211068 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652757 bytes 268585556 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652757 bytes 268585556 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695769 bytes 149035765 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892500 bytes 321220057 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695769 bytes 149035765 (149.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892500 bytes 321220057 (321.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652786 bytes 268588176 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652786 bytes 268588176 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695814 bytes 149046907 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892565 bytes 321231434 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652851 bytes 268598151 (268.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652851 bytes 268598151 (268.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695836 bytes 149052078 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892595 bytes 321235486 (321.2 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695836 bytes 149052078 (149.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892595 bytes 321235486 (321.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652867 bytes 268599327 (268.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652867 bytes 268599327 (268.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695873 bytes 149061077 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892651 bytes 321244878 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 652928 bytes 268609006 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 652928 bytes 268609006 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695893 bytes 149066000 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892677 bytes 321248629 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695893 bytes 149066000 (149.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892677 bytes 321248629 (321.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 652944 bytes 268610182 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 652944 bytes 268610182 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695954 bytes 149077514 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892756 bytes 321259952 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653028 bytes 268621781 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653028 bytes 268621781 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695974 bytes 149082485 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892782 bytes 321263747 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 695974 bytes 149082485 (149.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892782 bytes 321263747 (321.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653044 bytes 268622957 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653044 bytes 268622957 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 695994 bytes 149087408 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892809 bytes 321267572 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653060 bytes 268624133 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653060 bytes 268624133 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696015 bytes 149092448 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892837 bytes 321271463 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696015 bytes 149092448 (149.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892837 bytes 321271463 (321.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653081 bytes 268625609 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653081 bytes 268625609 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696036 bytes 149097480 (149.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892865 bytes 321275361 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653097 bytes 268626785 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653097 bytes 268626785 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696071 bytes 149103948 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892908 bytes 321280421 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696071 bytes 149103948 (149.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892908 bytes 321280421 (321.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653128 bytes 268629449 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653128 bytes 268629449 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696101 bytes 149111289 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892944 bytes 321286286 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653149 bytes 268630981 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653149 bytes 268630981 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696142 bytes 149120452 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 892997 bytes 321294220 (321.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696142 bytes 149120452 (149.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 892997 bytes 321294220 (321.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653169 bytes 268632473 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653169 bytes 268632473 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696180 bytes 149129535 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893053 bytes 321303535 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653234 bytes 268642308 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653234 bytes 268642308 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696200 bytes 149134515 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893079 bytes 321307278 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696200 bytes 149134515 (149.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893079 bytes 321307278 (321.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653246 bytes 268643168 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653246 bytes 268643168 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696259 bytes 149145810 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893157 bytes 321318471 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653331 bytes 268654821 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653331 bytes 268654821 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696279 bytes 149150782 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893183 bytes 321322261 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696279 bytes 149150782 (149.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893183 bytes 321322261 (321.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653347 bytes 268655997 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653347 bytes 268655997 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696299 bytes 149155799 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893209 bytes 321326051 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653359 bytes 268656865 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653359 bytes 268656865 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696318 bytes 149160662 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893236 bytes 321329900 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696318 bytes 149160662 (149.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893236 bytes 321329900 (321.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653379 bytes 268658281 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653379 bytes 268658281 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696340 bytes 149165883 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893266 bytes 321334003 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653396 bytes 268659517 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653396 bytes 268659517 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696374 bytes 149172311 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893307 bytes 321338940 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696374 bytes 149172311 (149.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893307 bytes 321338940 (321.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653420 bytes 268661761 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653420 bytes 268661761 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696404 bytes 149179678 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893346 bytes 321345070 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653441 bytes 268663293 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653441 bytes 268663293 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696424 bytes 149184650 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893374 bytes 321349000 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696424 bytes 149184650 (149.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893374 bytes 321349000 (321.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653463 bytes 268664829 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653463 bytes 268664829 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696446 bytes 149189781 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893402 bytes 321352894 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653480 bytes 268666065 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653480 bytes 268666065 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696483 bytes 149198606 (149.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893452 bytes 321360651 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696483 bytes 149198606 (149.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893452 bytes 321360651 (321.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653500 bytes 268667557 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653500 bytes 268667557 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696545 bytes 149210180 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893531 bytes 321371800 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653584 bytes 268679156 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653584 bytes 268679156 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696564 bytes 149215002 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893558 bytes 321375664 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696564 bytes 149215002 (149.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893558 bytes 321375664 (321.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653600 bytes 268680332 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653600 bytes 268680332 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696593 bytes 149220653 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893589 bytes 321379809 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653616 bytes 268681508 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653616 bytes 268681508 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696613 bytes 149225613 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893616 bytes 321383673 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696613 bytes 149225613 (149.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893616 bytes 321383673 (321.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653632 bytes 268682684 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653632 bytes 268682684 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696633 bytes 149230593 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893642 bytes 321387456 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653653 bytes 268684160 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653653 bytes 268684160 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696668 bytes 149237109 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893684 bytes 321392457 (321.3 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696668 bytes 149237109 (149.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893684 bytes 321392457 (321.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653673 bytes 268686164 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653673 bytes 268686164 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696696 bytes 149244175 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893720 bytes 321398290 (321.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653698 bytes 268687936 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653698 bytes 268687936 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696717 bytes 149249264 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893746 bytes 321402080 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696717 bytes 149249264 (149.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893746 bytes 321402080 (321.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653714 bytes 268689112 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653714 bytes 268689112 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696740 bytes 149254447 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893776 bytes 321406121 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653730 bytes 268690288 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653730 bytes 268690288 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696759 bytes 149259304 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893802 bytes 321409892 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696759 bytes 149259304 (149.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893802 bytes 321409892 (321.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653751 bytes 268691764 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653751 bytes 268691764 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696801 bytes 149266544 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893852 bytes 321415465 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653791 bytes 268694930 (268.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653791 bytes 268694930 (268.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696837 bytes 149275247 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893899 bytes 321423056 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696837 bytes 149275247 (149.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893899 bytes 321423056 (321.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653811 bytes 268696422 (268.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653811 bytes 268696422 (268.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696878 bytes 149284612 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893959 bytes 321432763 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653874 bytes 268706205 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653874 bytes 268706205 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696900 bytes 149289749 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 893987 bytes 321436668 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696900 bytes 149289749 (149.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 893987 bytes 321436668 (321.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653890 bytes 268707381 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653890 bytes 268707381 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696920 bytes 149294672 (149.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894014 bytes 321440493 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653911 bytes 268708857 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653911 bytes 268708857 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696955 bytes 149301103 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894056 bytes 321445448 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 696955 bytes 149301103 (149.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894056 bytes 321445448 (321.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653931 bytes 268710861 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653931 bytes 268710861 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 696984 bytes 149308286 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894095 bytes 321451559 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653958 bytes 268712757 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653958 bytes 268712757 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697005 bytes 149313324 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894124 bytes 321455563 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697005 bytes 149313324 (149.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894124 bytes 321455563 (321.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 653975 bytes 268713995 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 653975 bytes 268713995 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697027 bytes 149318453 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894154 bytes 321459616 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 653991 bytes 268715171 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 653991 bytes 268715171 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697048 bytes 149323530 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894182 bytes 321463546 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697048 bytes 149323530 (149.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894182 bytes 321463546 (321.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654007 bytes 268716347 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654007 bytes 268716347 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697089 bytes 149330696 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894228 bytes 321469050 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654044 bytes 268719339 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654044 bytes 268719339 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697109 bytes 149335619 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894255 bytes 321472875 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697109 bytes 149335619 (149.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894255 bytes 321472875 (321.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654065 bytes 268720815 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654065 bytes 268720815 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697130 bytes 149340659 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894281 bytes 321476626 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654083 bytes 268722111 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654083 bytes 268722111 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697168 bytes 149349494 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894333 bytes 321484457 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697168 bytes 149349494 (149.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894333 bytes 321484457 (321.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654103 bytes 268723603 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654103 bytes 268723603 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697206 bytes 149358633 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894391 bytes 321493988 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654170 bytes 268733634 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654170 bytes 268733634 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697239 bytes 149364995 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894429 bytes 321498735 (321.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697239 bytes 149364995 (149.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894429 bytes 321498735 (321.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654190 bytes 268735638 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654190 bytes 268735638 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697289 bytes 149376529 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894496 bytes 321510222 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654263 bytes 268746069 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654263 bytes 268746069 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697306 bytes 149381266 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894521 bytes 321513943 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697306 bytes 149381266 (149.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894521 bytes 321513943 (321.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654275 bytes 268746929 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654275 bytes 268746929 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697351 bytes 149390880 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894577 bytes 321523304 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654339 bytes 268756764 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654339 bytes 268756764 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697370 bytes 149395823 (149.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894603 bytes 321527113 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697370 bytes 149395823 (149.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894603 bytes 321527113 (321.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654351 bytes 268757632 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654351 bytes 268757632 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697427 bytes 149406980 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894683 bytes 321538364 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654434 bytes 268769179 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654434 bytes 268769179 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697447 bytes 149411954 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894709 bytes 321542134 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697447 bytes 149411954 (149.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894709 bytes 321542134 (321.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654450 bytes 268770355 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654450 bytes 268770355 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697469 bytes 149417094 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894738 bytes 321546132 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654466 bytes 268771531 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654466 bytes 268771531 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697489 bytes 149422060 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894766 bytes 321550050 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697489 bytes 149422060 (149.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894766 bytes 321550050 (321.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654485 bytes 268772887 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654485 bytes 268772887 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697511 bytes 149427178 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894793 bytes 321553899 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654507 bytes 268774423 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654507 bytes 268774423 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697545 bytes 149433586 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894835 bytes 321558917 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697545 bytes 149433586 (149.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894835 bytes 321558917 (321.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654530 bytes 268776607 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654530 bytes 268776607 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697610 bytes 149448808 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894926 bytes 321574389 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654605 bytes 268787234 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654605 bytes 268787234 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697632 bytes 149453945 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 894955 bytes 321578361 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697632 bytes 149453945 (149.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 894955 bytes 321578361 (321.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654623 bytes 268788530 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654623 bytes 268788530 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697667 bytes 149462804 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895011 bytes 321587754 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654686 bytes 268798313 (268.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654686 bytes 268798313 (268.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697689 bytes 149467933 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895040 bytes 321591741 (321.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697689 bytes 149467933 (149.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895040 bytes 321591741 (321.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654702 bytes 268799489 (268.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654702 bytes 268799489 (268.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697750 bytes 149479442 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895121 bytes 321603013 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654788 bytes 268811192 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654788 bytes 268811192 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697770 bytes 149484350 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895149 bytes 321606892 (321.6 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697770 bytes 149484350 (149.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895149 bytes 321606892 (321.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654804 bytes 268812368 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654804 bytes 268812368 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697790 bytes 149489304 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895176 bytes 321610744 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654820 bytes 268813544 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654820 bytes 268813544 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697813 bytes 149494518 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895205 bytes 321614709 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697813 bytes 149494518 (149.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895205 bytes 321614709 (321.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654836 bytes 268814720 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654836 bytes 268814720 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697834 bytes 149499581 (149.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895233 bytes 321618642 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654852 bytes 268815896 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654852 bytes 268815896 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697868 bytes 149505952 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895274 bytes 321623547 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697868 bytes 149505952 (149.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895274 bytes 321623547 (321.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654877 bytes 268818200 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654877 bytes 268818200 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697898 bytes 149513201 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895310 bytes 321629368 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654903 bytes 268820032 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654903 bytes 268820032 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697918 bytes 149518124 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895338 bytes 321633258 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697918 bytes 149518124 (149.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895338 bytes 321633258 (321.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654925 bytes 268821568 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654925 bytes 268821568 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697959 bytes 149527232 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895392 bytes 321641246 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 654945 bytes 268823060 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 654945 bytes 268823060 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 697980 bytes 149532315 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895418 bytes 321645024 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 697980 bytes 149532315 (149.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895418 bytes 321645024 (321.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 654961 bytes 268824236 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 654961 bytes 268824236 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698037 bytes 149543490 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895494 bytes 321656119 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655046 bytes 268835887 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655046 bytes 268835887 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698059 bytes 149548570 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895522 bytes 321660024 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698059 bytes 149548570 (149.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895522 bytes 321660024 (321.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655062 bytes 268837063 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655062 bytes 268837063 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698080 bytes 149553610 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895550 bytes 321663914 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655078 bytes 268838239 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655078 bytes 268838239 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698098 bytes 149558407 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895575 bytes 321667643 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698098 bytes 149558407 (149.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895575 bytes 321667643 (321.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655094 bytes 268839415 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655094 bytes 268839415 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698122 bytes 149563748 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895606 bytes 321671764 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655110 bytes 268840591 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655110 bytes 268840591 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698157 bytes 149570236 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895648 bytes 321676743 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698157 bytes 149570236 (149.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895648 bytes 321676743 (321.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655135 bytes 268842895 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655135 bytes 268842895 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698185 bytes 149577302 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895683 bytes 321682502 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655155 bytes 268844367 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655155 bytes 268844367 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698205 bytes 149582275 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895711 bytes 321686439 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698205 bytes 149582275 (149.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895711 bytes 321686439 (321.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655176 bytes 268845843 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655176 bytes 268845843 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698225 bytes 149587249 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895738 bytes 321690276 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655198 bytes 268847379 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655198 bytes 268847379 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698247 bytes 149592384 (149.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895766 bytes 321694189 (321.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698247 bytes 149592384 (149.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895766 bytes 321694189 (321.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655215 bytes 268848615 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655215 bytes 268848615 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698304 bytes 149603348 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895836 bytes 321703642 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655256 bytes 268851925 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655256 bytes 268851925 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698324 bytes 149608328 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895861 bytes 321707350 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698324 bytes 149608328 (149.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895861 bytes 321707350 (321.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655272 bytes 268853101 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655272 bytes 268853101 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698344 bytes 149613251 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895889 bytes 321711240 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655288 bytes 268854277 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655288 bytes 268854277 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698365 bytes 149618282 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895918 bytes 321715223 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698365 bytes 149618282 (149.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895918 bytes 321715223 (321.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655304 bytes 268855453 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655304 bytes 268855453 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698386 bytes 149623353 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895945 bytes 321719047 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655320 bytes 268856629 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655320 bytes 268856629 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698424 bytes 149630152 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 895988 bytes 321724150 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698424 bytes 149630152 (149.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 895988 bytes 321724150 (321.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655345 bytes 268858933 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655345 bytes 268858933 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698449 bytes 149637055 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896023 bytes 321729961 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655361 bytes 268860089 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655361 bytes 268860089 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698470 bytes 149642095 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896050 bytes 321733778 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698470 bytes 149642095 (149.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896050 bytes 321733778 (321.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655382 bytes 268861565 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655382 bytes 268861565 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698489 bytes 149646958 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896076 bytes 321737553 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655398 bytes 268862741 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655398 bytes 268862741 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698507 bytes 149651761 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896101 bytes 321741262 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698507 bytes 149651761 (149.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896101 bytes 321741262 (321.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655410 bytes 268863609 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655410 bytes 268863609 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698547 bytes 149658918 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896147 bytes 321746786 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655452 bytes 268866901 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655452 bytes 268866901 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698568 bytes 149663956 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896175 bytes 321750692 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698568 bytes 149663956 (149.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896175 bytes 321750692 (321.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655470 bytes 268868197 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655470 bytes 268868197 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698609 bytes 149673108 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896229 bytes 321758705 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655490 bytes 268869689 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655490 bytes 268869689 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698629 bytes 149678082 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896255 bytes 321762476 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698629 bytes 149678082 (149.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896255 bytes 321762476 (321.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655506 bytes 268870865 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655506 bytes 268870865 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698649 bytes 149683053 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896282 bytes 321766345 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655522 bytes 268872041 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655522 bytes 268872041 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698683 bytes 149689473 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896324 bytes 321771363 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698683 bytes 149689473 (149.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896324 bytes 321771363 (321.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655544 bytes 268874165 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655544 bytes 268874165 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698711 bytes 149696639 (149.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896363 bytes 321777513 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655569 bytes 268875941 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655569 bytes 268875941 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698732 bytes 149701708 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896394 bytes 321781684 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698732 bytes 149701708 (149.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896394 bytes 321781684 (321.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655589 bytes 268877359 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655589 bytes 268877359 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698753 bytes 149706728 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896422 bytes 321785589 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655607 bytes 268878655 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655607 bytes 268878655 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698772 bytes 149711685 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896448 bytes 321789398 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698772 bytes 149711685 (149.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896448 bytes 321789398 (321.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655623 bytes 268879831 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655623 bytes 268879831 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698812 bytes 149718748 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896498 bytes 321795002 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655661 bytes 268882875 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655661 bytes 268882875 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698832 bytes 149723665 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896525 bytes 321798827 (321.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698832 bytes 149723665 (149.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896525 bytes 321798827 (321.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655677 bytes 268884051 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655677 bytes 268884051 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698854 bytes 149728802 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896553 bytes 321802733 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655698 bytes 268885527 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655698 bytes 268885527 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698874 bytes 149733774 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896580 bytes 321806597 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698874 bytes 149733774 (149.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896580 bytes 321806597 (321.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655716 bytes 268886823 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655716 bytes 268886823 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698912 bytes 149742665 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896631 bytes 321814409 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655736 bytes 268888315 (268.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655736 bytes 268888315 (268.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 698947 bytes 149749184 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896672 bytes 321819329 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 698947 bytes 149749184 (149.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896672 bytes 321819329 (321.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655756 bytes 268890319 (268.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655756 bytes 268890319 (268.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699001 bytes 149760975 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896740 bytes 321830941 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655827 bytes 268900646 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655827 bytes 268900646 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699021 bytes 149765941 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896766 bytes 321834719 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699021 bytes 149765941 (149.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896766 bytes 321834719 (321.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655843 bytes 268901822 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655843 bytes 268901822 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699061 bytes 149775206 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896826 bytes 321844321 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 655912 bytes 268911957 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 655912 bytes 268911957 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699081 bytes 149780172 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896854 bytes 321848239 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699081 bytes 149780172 (149.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896854 bytes 321848239 (321.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 655928 bytes 268913133 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 655928 bytes 268913133 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699139 bytes 149791351 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896934 bytes 321859453 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656013 bytes 268924786 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656013 bytes 268924786 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699161 bytes 149796488 (149.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896962 bytes 321863359 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699161 bytes 149796488 (149.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 896962 bytes 321863359 (321.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656029 bytes 268925962 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656029 bytes 268925962 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699180 bytes 149801345 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 896988 bytes 321867130 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656045 bytes 268927138 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656045 bytes 268927138 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699199 bytes 149806251 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897015 bytes 321871006 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699199 bytes 149806251 (149.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897015 bytes 321871006 (321.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656061 bytes 268928314 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656061 bytes 268928314 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699221 bytes 149811442 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897042 bytes 321874876 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656081 bytes 268929730 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656081 bytes 268929730 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699254 bytes 149817753 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897083 bytes 321879813 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699254 bytes 149817753 (149.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897083 bytes 321879813 (321.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656104 bytes 268931914 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656104 bytes 268931914 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699283 bytes 149824922 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897119 bytes 321885673 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656129 bytes 268933686 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656129 bytes 268933686 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699323 bytes 149833983 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897170 bytes 321893434 (321.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699323 bytes 149833983 (149.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897170 bytes 321893434 (321.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656149 bytes 268935178 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656149 bytes 268935178 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699361 bytes 149843028 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897227 bytes 321902857 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656218 bytes 268945313 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656218 bytes 268945313 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699379 bytes 149847849 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897253 bytes 321906668 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699379 bytes 149847849 (149.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897253 bytes 321906668 (321.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656234 bytes 268946489 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656234 bytes 268946489 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699443 bytes 149859581 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897337 bytes 321918075 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656319 bytes 268958142 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656319 bytes 268958142 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699464 bytes 149864607 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897365 bytes 321921980 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699464 bytes 149864607 (149.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897365 bytes 321921980 (321.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656335 bytes 268959318 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656335 bytes 268959318 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699485 bytes 149869627 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897391 bytes 321925738 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656351 bytes 268960494 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656351 bytes 268960494 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699507 bytes 149874764 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897418 bytes 321929570 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699507 bytes 149874764 (149.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897418 bytes 321929570 (321.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656367 bytes 268961670 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656367 bytes 268961670 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699525 bytes 149879615 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897444 bytes 321933389 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656379 bytes 268962530 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656379 bytes 268962530 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699560 bytes 149886095 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897485 bytes 321938309 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699560 bytes 149886095 (149.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897485 bytes 321938309 (321.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656399 bytes 268964534 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656399 bytes 268964534 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699593 bytes 149893677 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897521 bytes 321944193 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656423 bytes 268966246 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656423 bytes 268966246 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699611 bytes 149898480 (149.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897547 bytes 321947968 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699611 bytes 149898480 (149.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897547 bytes 321947968 (321.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656442 bytes 268967534 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656442 bytes 268967534 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699630 bytes 149903343 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897573 bytes 321951751 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656464 bytes 268969070 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656464 bytes 268969070 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699668 bytes 149912235 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897623 bytes 321959463 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699668 bytes 149912235 (149.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897623 bytes 321959463 (321.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656484 bytes 268970562 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656484 bytes 268970562 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699729 bytes 149923730 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897703 bytes 321970818 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656569 bytes 268982215 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656569 bytes 268982215 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699749 bytes 149928690 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897730 bytes 321974681 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699749 bytes 149928690 (149.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897730 bytes 321974681 (321.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656585 bytes 268983391 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656585 bytes 268983391 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699769 bytes 149933664 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897758 bytes 321978572 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656601 bytes 268984567 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656601 bytes 268984567 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699794 bytes 149938941 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897784 bytes 321982347 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699794 bytes 149938941 (149.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897784 bytes 321982347 (321.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656617 bytes 268985743 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656617 bytes 268985743 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699813 bytes 149943798 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897810 bytes 321986118 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656633 bytes 268986919 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656633 bytes 268986919 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699849 bytes 149950481 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897852 bytes 321991149 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699849 bytes 149950481 (149.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897852 bytes 321991149 (321.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656653 bytes 268988923 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656653 bytes 268988923 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699878 bytes 149957700 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897889 bytes 321997120 (321.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656673 bytes 268990395 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656673 bytes 268990395 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699896 bytes 149962497 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897914 bytes 322000841 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699896 bytes 149962497 (149.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897914 bytes 322000841 (322.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656695 bytes 268991931 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656695 bytes 268991931 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699918 bytes 149967634 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897942 bytes 322004747 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656711 bytes 268993107 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656711 bytes 268993107 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699937 bytes 149972534 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 897970 bytes 322008665 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 699937 bytes 149972534 (149.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 897970 bytes 322008665 (322.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656738 bytes 268994943 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656738 bytes 268994943 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 699977 bytes 149979640 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898019 bytes 322014223 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656777 bytes 268998047 (268.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656777 bytes 268998047 (268.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700017 bytes 149988702 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898070 bytes 322022023 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700017 bytes 149988702 (149.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898070 bytes 322022023 (322.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656797 bytes 268999539 (268.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656797 bytes 268999539 (268.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700037 bytes 149993662 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898096 bytes 322025781 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656809 bytes 269000399 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656809 bytes 269000399 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700058 bytes 149998694 (149.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898125 bytes 322029753 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700058 bytes 149998694 (149.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898125 bytes 322029753 (322.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656825 bytes 269001575 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656825 bytes 269001575 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700081 bytes 150003891 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898154 bytes 322033701 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656841 bytes 269002751 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656841 bytes 269002751 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700117 bytes 150010485 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898197 bytes 322038786 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700117 bytes 150010485 (150.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898197 bytes 322038786 (322.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656861 bytes 269004755 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656861 bytes 269004755 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700147 bytes 150017820 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898234 bytes 322044725 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656881 bytes 269006227 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656881 bytes 269006227 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700167 bytes 150022816 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898261 bytes 322048577 (322.0 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700167 bytes 150022816 (150.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898261 bytes 322048577 (322.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656901 bytes 269007643 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656901 bytes 269007643 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700188 bytes 150027836 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898289 bytes 322052483 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656918 bytes 269008879 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656918 bytes 269008879 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700208 bytes 150032759 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898317 bytes 322056374 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700208 bytes 150032759 (150.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898317 bytes 322056374 (322.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656939 bytes 269010355 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656939 bytes 269010355 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700251 bytes 150040102 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898365 bytes 322061994 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 656976 bytes 269013349 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 656976 bytes 269013349 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700272 bytes 150045134 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898393 bytes 322065900 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700272 bytes 150045134 (150.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898393 bytes 322065900 (322.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 656998 bytes 269014885 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 656998 bytes 269014885 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700292 bytes 150050057 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898421 bytes 322069790 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657015 bytes 269016121 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657015 bytes 269016121 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700332 bytes 150059099 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898474 bytes 322077711 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700332 bytes 150059099 (150.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898474 bytes 322077711 (322.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657035 bytes 269017613 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657035 bytes 269017613 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700373 bytes 150068361 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898533 bytes 322087281 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657098 bytes 269027396 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657098 bytes 269027396 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700407 bytes 150074780 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898574 bytes 322092238 (322.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700407 bytes 150074780 (150.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898574 bytes 322092238 (322.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657118 bytes 269029400 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657118 bytes 269029400 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700455 bytes 150086189 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898641 bytes 322103755 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657187 bytes 269039593 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657187 bytes 269039593 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700476 bytes 150091221 (150.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898674 bytes 322108071 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700476 bytes 150091221 (150.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898674 bytes 322108071 (322.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657205 bytes 269040893 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657205 bytes 269040893 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700513 bytes 150100244 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898729 bytes 322117396 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657275 bytes 269051080 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657275 bytes 269051080 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700536 bytes 150105447 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898757 bytes 322121302 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700536 bytes 150105447 (150.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898757 bytes 322121302 (322.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657296 bytes 269052556 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657296 bytes 269052556 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700595 bytes 150116779 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898833 bytes 322132404 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657380 bytes 269064155 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657380 bytes 269064155 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700615 bytes 150121702 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898859 bytes 322136155 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700615 bytes 150121702 (150.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898859 bytes 322136155 (322.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657396 bytes 269065331 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657396 bytes 269065331 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700637 bytes 150126851 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898888 bytes 322140127 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657412 bytes 269066507 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657412 bytes 269066507 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700657 bytes 150131774 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898915 bytes 322143952 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700657 bytes 150131774 (150.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 898915 bytes 322143952 (322.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657433 bytes 269067983 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657433 bytes 269067983 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700683 bytes 150137111 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 898942 bytes 322147769 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657451 bytes 269069279 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657451 bytes 269069279 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700738 bytes 150147709 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899006 bytes 322156537 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700738 bytes 150147709 (150.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899006 bytes 322156537 (322.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657475 bytes 269071599 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657475 bytes 269071599 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700785 bytes 150158960 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899071 bytes 322167908 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657538 bytes 269081370 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657538 bytes 269081370 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700806 bytes 150163999 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899099 bytes 322171833 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700806 bytes 150163999 (150.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899099 bytes 322171833 (322.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657554 bytes 269082546 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657554 bytes 269082546 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700847 bytes 150173405 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899158 bytes 322181430 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657623 bytes 269092681 (269.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657623 bytes 269092681 (269.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700866 bytes 150178262 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899184 bytes 322185201 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700866 bytes 150178262 (150.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899184 bytes 322185201 (322.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657643 bytes 269094097 (269.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657643 bytes 269094097 (269.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700925 bytes 150189556 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899261 bytes 322196365 (322.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657729 bytes 269105810 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657729 bytes 269105810 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700946 bytes 150194596 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899287 bytes 322200116 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700946 bytes 150194596 (150.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899287 bytes 322200116 (322.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657745 bytes 269106986 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657745 bytes 269106986 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700967 bytes 150199616 (150.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899316 bytes 322204088 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657761 bytes 269108162 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657761 bytes 269108162 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 700987 bytes 150204539 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899343 bytes 322207913 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 700987 bytes 150204539 (150.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899343 bytes 322207913 (322.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657777 bytes 269109338 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657777 bytes 269109338 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701008 bytes 150209579 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899371 bytes 322211804 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657793 bytes 269110514 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657793 bytes 269110514 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701045 bytes 150216270 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899415 bytes 322216971 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701045 bytes 150216270 (150.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899415 bytes 322216971 (322.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657817 bytes 269112758 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657817 bytes 269112758 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701075 bytes 150223511 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899451 bytes 322222798 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657840 bytes 269114410 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657840 bytes 269114410 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701113 bytes 150232447 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899502 bytes 322230598 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701113 bytes 150232447 (150.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899502 bytes 322230598 (322.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657860 bytes 269115902 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657860 bytes 269115902 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701150 bytes 150241475 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899558 bytes 322239998 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 657929 bytes 269126037 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 657929 bytes 269126037 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701171 bytes 150246452 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899586 bytes 322243865 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701171 bytes 150246452 (150.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899586 bytes 322243865 (322.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 657945 bytes 269127213 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 657945 bytes 269127213 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701230 bytes 150257797 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899664 bytes 322255033 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658032 bytes 269138902 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658032 bytes 269138902 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701251 bytes 150262817 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899692 bytes 322258938 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701251 bytes 150262817 (150.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899692 bytes 322258938 (322.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658048 bytes 269140078 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658048 bytes 269140078 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701270 bytes 150267680 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899719 bytes 322262786 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658064 bytes 269141254 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658064 bytes 269141254 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701291 bytes 150272800 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899746 bytes 322266677 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701291 bytes 150272800 (150.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899746 bytes 322266677 (322.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658080 bytes 269142430 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658080 bytes 269142430 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701310 bytes 150277657 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899773 bytes 322270502 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658096 bytes 269143606 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658096 bytes 269143606 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701343 bytes 150283968 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899813 bytes 322275365 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701343 bytes 150283968 (150.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899813 bytes 322275365 (322.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658116 bytes 269145610 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658116 bytes 269145610 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701374 bytes 150291362 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899851 bytes 322281376 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658136 bytes 269147082 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658136 bytes 269147082 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701395 bytes 150296375 (150.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899879 bytes 322285291 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701395 bytes 150296375 (150.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899879 bytes 322285291 (322.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658154 bytes 269148378 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658154 bytes 269148378 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701416 bytes 150301407 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899908 bytes 322289263 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658177 bytes 269149974 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658177 bytes 269149974 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701437 bytes 150306447 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 899936 bytes 322293154 (322.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701437 bytes 150306447 (150.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 899936 bytes 322293154 (322.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658196 bytes 269151330 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658196 bytes 269151330 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701495 bytes 150317471 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900008 bytes 322302715 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658242 bytes 269154940 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658242 bytes 269154940 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701517 bytes 150322551 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900038 bytes 322306729 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701517 bytes 150322551 (150.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900038 bytes 322306729 (322.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658258 bytes 269156116 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658258 bytes 269156116 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701537 bytes 150327525 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900065 bytes 322310566 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658274 bytes 269157292 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658274 bytes 269157292 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701557 bytes 150332448 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900092 bytes 322314391 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701557 bytes 150332448 (150.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900092 bytes 322314391 (322.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658290 bytes 269158468 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658290 bytes 269158468 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701577 bytes 150337365 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900119 bytes 322318228 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658306 bytes 269159644 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658306 bytes 269159644 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701613 bytes 150344042 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900160 bytes 322323186 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701613 bytes 150344042 (150.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900160 bytes 322323186 (322.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658326 bytes 269161648 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658326 bytes 269161648 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701644 bytes 150351380 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900198 bytes 322329169 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658346 bytes 269163120 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658346 bytes 269163120 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701664 bytes 150356303 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900226 bytes 322333060 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701664 bytes 150356303 (150.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900226 bytes 322333060 (322.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658362 bytes 269164296 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658362 bytes 269164296 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701687 bytes 150361580 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900253 bytes 322336969 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658378 bytes 269165472 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658378 bytes 269165472 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701708 bytes 150366563 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900280 bytes 322340785 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701708 bytes 150366563 (150.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900280 bytes 322340785 (322.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658399 bytes 269166948 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658399 bytes 269166948 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701749 bytes 150373717 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900331 bytes 322346450 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658448 bytes 269170652 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658448 bytes 269170652 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701772 bytes 150378963 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900361 bytes 322350503 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701772 bytes 150378963 (150.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900361 bytes 322350503 (322.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658465 bytes 269171888 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658465 bytes 269171888 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701809 bytes 150387732 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900410 bytes 322358129 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658485 bytes 269173380 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658485 bytes 269173380 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701828 bytes 150392589 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900435 bytes 322361826 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701828 bytes 150392589 (150.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900435 bytes 322361826 (322.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658501 bytes 269174556 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658501 bytes 269174556 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701847 bytes 150397503 (150.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900461 bytes 322365589 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658513 bytes 269175424 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658513 bytes 269175424 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701883 bytes 150404080 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900504 bytes 322370664 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701883 bytes 150404080 (150.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900504 bytes 322370664 (322.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658533 bytes 269177428 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658533 bytes 269177428 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701918 bytes 150411950 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900543 bytes 322376772 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658553 bytes 269178900 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658553 bytes 269178900 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701936 bytes 150416675 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900570 bytes 322380597 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701936 bytes 150416675 (150.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900570 bytes 322380597 (322.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658569 bytes 269180076 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658569 bytes 269180076 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701956 bytes 150421598 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900597 bytes 322384422 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658585 bytes 269181252 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658585 bytes 269181252 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 701976 bytes 150426521 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900623 bytes 322388173 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 701976 bytes 150426521 (150.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900623 bytes 322388173 (322.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658606 bytes 269182728 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658606 bytes 269182728 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702019 bytes 150433913 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900673 bytes 322393940 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658647 bytes 269185962 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658647 bytes 269185962 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702039 bytes 150438867 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900701 bytes 322397846 (322.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702039 bytes 150438867 (150.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900701 bytes 322397846 (322.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658664 bytes 269187198 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658664 bytes 269187198 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702061 bytes 150443959 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900730 bytes 322401818 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658686 bytes 269188734 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658686 bytes 269188734 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702081 bytes 150448933 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900756 bytes 322405589 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702081 bytes 150448933 (150.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900756 bytes 322405589 (322.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658703 bytes 269189970 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658703 bytes 269189970 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702121 bytes 150458044 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900808 bytes 322413480 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658723 bytes 269191462 (269.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658723 bytes 269191462 (269.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702154 bytes 150464392 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900849 bytes 322418419 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702154 bytes 150464392 (150.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900849 bytes 322418419 (322.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658743 bytes 269193466 (269.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658743 bytes 269193466 (269.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702205 bytes 150475980 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900919 bytes 322430209 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658812 bytes 269203669 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658812 bytes 269203669 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702225 bytes 150480951 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 900948 bytes 322434242 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702225 bytes 150480951 (150.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 900948 bytes 322434242 (322.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658829 bytes 269204907 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658829 bytes 269204907 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702263 bytes 150490010 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901003 bytes 322443537 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658891 bytes 269214638 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658891 bytes 269214638 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702285 bytes 150495147 (150.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901031 bytes 322447411 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702285 bytes 150495147 (150.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901031 bytes 322447411 (322.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 658908 bytes 269215798 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 658908 bytes 269215798 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702345 bytes 150506539 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901112 bytes 322458683 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 658994 bytes 269227501 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 658994 bytes 269227501 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702365 bytes 150511486 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901139 bytes 322462544 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702365 bytes 150511486 (150.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901139 bytes 322462544 (322.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659015 bytes 269228977 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659015 bytes 269228977 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702387 bytes 150516623 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901167 bytes 322466449 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659031 bytes 269230153 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659031 bytes 269230153 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702408 bytes 150521645 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901195 bytes 322470357 (322.4 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702408 bytes 150521645 (150.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901195 bytes 322470357 (322.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659047 bytes 269231329 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659047 bytes 269231329 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702429 bytes 150526677 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901224 bytes 322474329 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659068 bytes 269232805 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659068 bytes 269232805 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702464 bytes 150533165 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901265 bytes 322479241 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702464 bytes 150533165 (150.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901265 bytes 322479241 (322.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659090 bytes 269234929 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659090 bytes 269234929 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702512 bytes 150544306 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901327 bytes 322489137 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659114 bytes 269236717 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659114 bytes 269236717 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702532 bytes 150549229 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901354 bytes 322492962 (322.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702532 bytes 150549229 (150.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901354 bytes 322492962 (322.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659130 bytes 269237893 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659130 bytes 269237893 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702574 bytes 150558695 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901413 bytes 322502559 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659194 bytes 269247728 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659194 bytes 269247728 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702596 bytes 150563794 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901443 bytes 322506592 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702596 bytes 150563794 (150.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901443 bytes 322506592 (322.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659210 bytes 269248904 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659210 bytes 269248904 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702653 bytes 150574963 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901521 bytes 322517773 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659300 bytes 269260855 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659300 bytes 269260855 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702673 bytes 150579937 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901547 bytes 322521544 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702673 bytes 150579937 (150.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901547 bytes 322521544 (322.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659321 bytes 269262331 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659321 bytes 269262331 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702697 bytes 150585149 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901577 bytes 322525534 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659337 bytes 269263507 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659337 bytes 269263507 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702718 bytes 150590169 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901605 bytes 322529431 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702718 bytes 150590169 (150.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901605 bytes 322529431 (322.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659353 bytes 269264683 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659353 bytes 269264683 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702739 bytes 150595252 (150.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901633 bytes 322533348 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659369 bytes 269265859 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659369 bytes 269265859 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702773 bytes 150601651 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901675 bytes 322538366 (322.5 MBsudo: no tty present and no askpass program specified )\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659389 bytes 269267863 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659389 bytes 269267863 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702773 bytes 150601651 (150.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901675 bytes 322538366 (322.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659389 bytes 269267863 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659389 bytes 269267863 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisisudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702802 bytes 150608805 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901713 bytes 322544334 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659414 bytes 269269635 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659414 bytes 269269635 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702823 bytes 150613879 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901741 bytes 322548251 (322.5 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702823 bytes 150613879 (150.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901741 bytes 322548251 (322.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659432 bytes 269270931 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659432 bytes 269270931 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702862 bytes 150622805 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901791 bytes 322555937 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659452 bytes 269272423 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659452 bytes 269272423 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702883 bytes 150627868 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901819 bytes 322559870 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702883 bytes 150627868 (150.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901819 bytes 322559870 (322.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659468 bytes 269273599 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659468 bytes 269273599 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702944 bytes 150639334 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901896 bytes 322571019 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659558 bytes 269285552 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659558 bytes 269285552 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702963 bytes 150644191 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901921 bytes 322574716 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 702963 bytes 150644191 (150.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901921 bytes 322574716 (322.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659579 bytes 269287028 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659579 bytes 269287028 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 702983 bytes 150649114 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901948 bytes 322578541 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659595 bytes 269288204 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659595 bytes 269288204 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703004 bytes 150654203 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 901974 bytes 322582299 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703004 bytes 150654203 (150.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 901974 bytes 322582299 (322.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659607 bytes 269289072 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659607 bytes 269289072 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703024 bytes 150659157 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902003 bytes 322586271 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659623 bytes 269290248 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659623 bytes 269290248 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703060 bytes 150665697 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902045 bytes 322591266 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703060 bytes 150665697 (150.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902045 bytes 322591266 (322.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659643 bytes 269292252 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659643 bytes 269292252 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703090 bytes 150672989 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902081 bytes 322597114 (322.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659663 bytes 269293724 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659663 bytes 269293724 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703111 bytes 150678070 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902110 bytes 322601104 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703111 bytes 150678070 (150.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902110 bytes 322601104 (322.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659679 bytes 269294900 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659679 bytes 269294900 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703138 bytes 150683552 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902140 bytes 322605175 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659698 bytes 269296256 (269.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659698 bytes 269296256 (269.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703159 bytes 150688592 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902166 bytes 322608927 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703159 bytes 150688592 (150.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902166 bytes 322608927 (322.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659718 bytes 269297672 (269.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659718 bytes 269297672 (269.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703200 bytes 150695752 (150.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902213 bytes 322614494 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659760 bytes 269300966 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659760 bytes 269300966 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703238 bytes 150704668 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902265 bytes 322622376 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703238 bytes 150704668 (150.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902265 bytes 322622376 (322.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659783 bytes 269302638 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659783 bytes 269302638 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703260 bytes 150709817 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902293 bytes 322626282 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659801 bytes 269303934 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659801 bytes 269303934 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703281 bytes 150714849 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902322 bytes 322630255 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703281 bytes 150714849 (150.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902322 bytes 322630255 (322.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659817 bytes 269305110 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659817 bytes 269305110 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703303 bytes 150719977 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902351 bytes 322634246 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659833 bytes 269306286 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659833 bytes 269306286 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703338 bytes 150726489 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902394 bytes 322639316 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703338 bytes 150726489 (150.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902394 bytes 322639316 (322.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659853 bytes 269308290 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659853 bytes 269308290 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703368 bytes 150733681 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902429 bytes 322645064 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659873 bytes 269309762 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659873 bytes 269309762 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703389 bytes 150738807 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902457 bytes 322649017 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703389 bytes 150738807 (150.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902457 bytes 322649017 (322.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659889 bytes 269310938 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659889 bytes 269310938 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703411 bytes 150743944 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902485 bytes 322652916 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659905 bytes 269312114 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659905 bytes 269312114 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703436 bytes 150749270 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902512 bytes 322656772 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703436 bytes 150749270 (150.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902512 bytes 322656772 (322.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659917 bytes 269312974 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659917 bytes 269312974 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703478 bytes 150756515 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902561 bytes 322662453 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 659958 bytes 269316206 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 659958 bytes 269316206 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703498 bytes 150761495 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902587 bytes 322666237 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703498 bytes 150761495 (150.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902587 bytes 322666237 (322.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 659981 bytes 269317802 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 659981 bytes 269317802 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703518 bytes 150766455 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902613 bytes 322670028 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660003 bytes 269319338 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660003 bytes 269319338 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703557 bytes 150775393 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902666 bytes 322677930 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703557 bytes 150775393 (150.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902666 bytes 322677930 (322.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660023 bytes 269320830 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660023 bytes 269320830 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703599 bytes 150784816 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902725 bytes 322687501 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660086 bytes 269330613 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660086 bytes 269330613 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703634 bytes 150791247 (150.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902767 bytes 322692481 (322.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703634 bytes 150791247 (150.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902767 bytes 322692481 (322.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660106 bytes 269332617 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660106 bytes 269332617 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703681 bytes 150802515 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902833 bytes 322703912 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660172 bytes 269342644 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660172 bytes 269342644 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703702 bytes 150807555 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902861 bytes 322707804 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703702 bytes 150807555 (150.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902861 bytes 322707804 (322.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660188 bytes 269343820 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660188 bytes 269343820 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703742 bytes 150816820 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902918 bytes 322717294 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660250 bytes 269353551 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660250 bytes 269353551 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703762 bytes 150821780 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 902945 bytes 322721159 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703762 bytes 150821780 (150.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 902945 bytes 322721159 (322.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660266 bytes 269354727 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660266 bytes 269354727 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703822 bytes 150833148 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903022 bytes 322732321 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660351 bytes 269366380 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660351 bytes 269366380 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703841 bytes 150838011 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903048 bytes 322736105 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703841 bytes 150838011 (150.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903048 bytes 322736105 (322.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660372 bytes 269367856 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660372 bytes 269367856 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703861 bytes 150842934 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903076 bytes 322739997 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660392 bytes 269369272 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660392 bytes 269369272 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703882 bytes 150848023 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903102 bytes 322743788 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703882 bytes 150848023 (150.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903102 bytes 322743788 (322.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660414 bytes 269370808 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660414 bytes 269370808 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703902 bytes 150852983 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903129 bytes 322747653 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660431 bytes 269372044 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660431 bytes 269372044 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 703954 bytes 150863303 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903195 bytes 322756601 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 703954 bytes 150863303 (150.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903195 bytes 322756601 (322.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660455 bytes 269374364 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660455 bytes 269374364 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704005 bytes 150875065 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903264 bytes 322768361 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660524 bytes 269384567 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660524 bytes 269384567 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704024 bytes 150879899 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903293 bytes 322772356 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704024 bytes 150879899 (150.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903293 bytes 322772356 (322.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660541 bytes 269385805 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660541 bytes 269385805 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704063 bytes 150889102 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903350 bytes 322781833 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660604 bytes 269395588 (269.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660604 bytes 269395588 (269.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704083 bytes 150894070 (150.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903378 bytes 322785711 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704083 bytes 150894070 (150.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903378 bytes 322785711 (322.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660620 bytes 269396764 (269.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660620 bytes 269396764 (269.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704141 bytes 150905298 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903455 bytes 322796854 (322.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660705 bytes 269408417 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660705 bytes 269408417 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704161 bytes 150910221 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903481 bytes 322800604 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704161 bytes 150910221 (150.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903481 bytes 322800604 (322.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660726 bytes 269409893 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660726 bytes 269409893 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704182 bytes 150915341 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903509 bytes 322804528 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660743 bytes 269411061 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660743 bytes 269411061 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704202 bytes 150920258 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903536 bytes 322808364 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704202 bytes 150920258 (150.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903536 bytes 322808364 (322.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660759 bytes 269412237 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660759 bytes 269412237 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704222 bytes 150925223 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903563 bytes 322812226 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660775 bytes 269413413 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660775 bytes 269413413 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704255 bytes 150931585 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903602 bytes 322817042 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704255 bytes 150931585 (150.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903602 bytes 322817042 (322.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660801 bytes 269415777 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660801 bytes 269415777 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704291 bytes 150939191 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903639 bytes 322822904 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660822 bytes 269417309 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660822 bytes 269417309 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704330 bytes 150948222 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903692 bytes 322830889 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704330 bytes 150948222 (150.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903692 bytes 322830889 (322.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660842 bytes 269418801 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660842 bytes 269418801 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704370 bytes 150957482 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903749 bytes 322840238 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 660905 bytes 269428584 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 660905 bytes 269428584 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704392 bytes 150962555 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903778 bytes 322844195 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704392 bytes 150962555 (150.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903778 bytes 322844195 (322.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 660921 bytes 269429760 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 660921 bytes 269429760 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704451 bytes 150973876 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903856 bytes 322855444 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661004 bytes 269441309 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661004 bytes 269441309 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704473 bytes 150978976 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903884 bytes 322859311 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704473 bytes 150978976 (150.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903884 bytes 322859311 (322.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661025 bytes 269442785 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661025 bytes 269442785 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704494 bytes 150984033 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903914 bytes 322863352 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661043 bytes 269444081 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661043 bytes 269444081 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704516 bytes 150989113 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903943 bytes 322867292 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704516 bytes 150989113 (150.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 903943 bytes 322867292 (322.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661062 bytes 269445437 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661062 bytes 269445437 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704543 bytes 150994567 (150.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 903970 bytes 322871117 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661078 bytes 269446613 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661078 bytes 269446613 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704575 bytes 151000812 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904010 bytes 322876000 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704575 bytes 151000812 (151.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904010 bytes 322876000 (322.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661098 bytes 269448617 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661098 bytes 269448617 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704604 bytes 151007944 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904045 bytes 322881747 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661118 bytes 269450089 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661118 bytes 269450089 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704624 bytes 151012967 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904071 bytes 322885517 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704624 bytes 151012967 (151.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904071 bytes 322885517 (322.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661135 bytes 269451249 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661135 bytes 269451249 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704644 bytes 151017927 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904099 bytes 322889446 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661153 bytes 269452545 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661153 bytes 269452545 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704681 bytes 151026696 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904149 bytes 322897145 (322.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704681 bytes 151026696 (151.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904149 bytes 322897145 (322.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661173 bytes 269454037 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661173 bytes 269454037 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704740 bytes 151038097 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904225 bytes 322908308 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661258 bytes 269465690 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661258 bytes 269465690 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704759 bytes 151042954 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904252 bytes 322912145 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704759 bytes 151042954 (151.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904252 bytes 322912145 (322.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661278 bytes 269467106 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661278 bytes 269467106 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704779 bytes 151047908 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904278 bytes 322915923 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661295 bytes 269468342 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661295 bytes 269468342 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704801 bytes 151053045 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904307 bytes 322919895 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704801 bytes 151053045 (151.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904307 bytes 322919895 (322.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661316 bytes 269469818 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661316 bytes 269469818 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704820 bytes 151057902 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904334 bytes 322923732 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661332 bytes 269470994 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661332 bytes 269470994 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704860 bytes 151064730 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904375 bytes 322928672 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704860 bytes 151064730 (151.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904375 bytes 322928672 (322.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661352 bytes 269472998 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661352 bytes 269472998 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704890 bytes 151072071 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904411 bytes 322934537 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661372 bytes 269474470 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661372 bytes 269474470 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704910 bytes 151076994 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904439 bytes 322938428 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704910 bytes 151076994 (151.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904439 bytes 322938428 (322.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661388 bytes 269475646 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661388 bytes 269475646 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704929 bytes 151081888 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904465 bytes 322942238 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661404 bytes 269476822 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661404 bytes 269476822 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704951 bytes 151087091 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904493 bytes 322946200 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 704951 bytes 151087091 (151.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904493 bytes 322946200 (322.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661424 bytes 269478238 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661424 bytes 269478238 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 704990 bytes 151094143 (151.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904539 bytes 322951724 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661464 bytes 269481412 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661464 bytes 269481412 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705031 bytes 151103257 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904590 bytes 322959478 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705031 bytes 151103257 (151.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904590 bytes 322959478 (322.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661484 bytes 269482904 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661484 bytes 269482904 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705076 bytes 151112765 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904648 bytes 322968972 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661553 bytes 269493039 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661553 bytes 269493039 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705094 bytes 151117562 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904673 bytes 322972701 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705094 bytes 151117562 (151.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904673 bytes 322972701 (322.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661574 bytes 269494515 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661574 bytes 269494515 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705115 bytes 151122593 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904701 bytes 322976618 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661590 bytes 269495691 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661590 bytes 269495691 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705150 bytes 151129124 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904742 bytes 322981558 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705150 bytes 151129124 (151.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904742 bytes 322981558 (322.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661610 bytes 269497695 (269.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661610 bytes 269497695 (269.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705181 bytes 151136540 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904779 bytes 322987483 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661630 bytes 269499167 (269.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661630 bytes 269499167 (269.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705199 bytes 151141302 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904804 bytes 322991199 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705199 bytes 151141302 (151.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904804 bytes 322991199 (322.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661646 bytes 269500343 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661646 bytes 269500343 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705221 bytes 151146502 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904833 bytes 322995190 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661662 bytes 269501519 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661662 bytes 269501519 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705239 bytes 151151299 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904857 bytes 322998845 (322.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705239 bytes 151151299 (151.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904857 bytes 322998845 (322.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661678 bytes 269502695 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661678 bytes 269502695 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705279 bytes 151158368 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904904 bytes 323004376 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661715 bytes 269505689 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661715 bytes 269505689 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705302 bytes 151163670 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904933 bytes 323008389 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705302 bytes 151163670 (151.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904933 bytes 323008389 (323.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661728 bytes 269506617 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661728 bytes 269506617 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705321 bytes 151168527 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904960 bytes 323012214 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661754 bytes 269508393 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661754 bytes 269508393 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705340 bytes 151173384 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 904987 bytes 323016039 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705340 bytes 151173384 (151.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 904987 bytes 323016039 (323.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661775 bytes 269509869 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661775 bytes 269509869 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705381 bytes 151182536 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905040 bytes 323023983 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661796 bytes 269511421 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661796 bytes 269511421 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705417 bytes 151189082 (151.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905083 bytes 323029019 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705417 bytes 151189082 (151.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905083 bytes 323029019 (323.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661816 bytes 269513425 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661816 bytes 269513425 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705467 bytes 151200553 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905150 bytes 323040519 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661883 bytes 269523504 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661883 bytes 269523504 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705488 bytes 151205584 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905177 bytes 323044336 (323.0 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705488 bytes 151205584 (151.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905177 bytes 323044336 (323.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661899 bytes 269524680 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661899 bytes 269524680 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705527 bytes 151214740 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905234 bytes 323053786 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 661960 bytes 269534359 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 661960 bytes 269534359 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705547 bytes 151219706 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905263 bytes 323057758 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705547 bytes 151219706 (151.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905263 bytes 323057758 (323.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 661976 bytes 269535535 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 661976 bytes 269535535 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705607 bytes 151231074 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905340 bytes 323068895 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662061 bytes 269547186 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662061 bytes 269547186 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705628 bytes 151236057 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905369 bytes 323072828 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705628 bytes 151236057 (151.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905369 bytes 323072828 (323.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662077 bytes 269548362 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662077 bytes 269548362 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705647 bytes 151240914 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905394 bytes 323076525 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662098 bytes 269549838 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662098 bytes 269549838 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705668 bytes 151245954 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905422 bytes 323080415 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705668 bytes 151245954 (151.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905422 bytes 323080415 (323.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662114 bytes 269551014 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662114 bytes 269551014 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705690 bytes 151251083 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905451 bytes 323084401 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662141 bytes 269552850 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662141 bytes 269552850 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705724 bytes 151257497 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905491 bytes 323089267 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705724 bytes 151257497 (151.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905491 bytes 323089267 (323.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662162 bytes 269554914 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662162 bytes 269554914 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705774 bytes 151268878 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905557 bytes 323099515 (323.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662188 bytes 269556826 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662188 bytes 269556826 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705793 bytes 151273732 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905584 bytes 323103363 (323.1 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705793 bytes 151273732 (151.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905584 bytes 323103363 (323.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662201 bytes 269557748 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662201 bytes 269557748 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705831 bytes 151282846 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905640 bytes 323112771 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662265 bytes 269567583 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662265 bytes 269567583 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705853 bytes 151288032 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905668 bytes 323116716 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705853 bytes 151288032 (151.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905668 bytes 323116716 (323.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662281 bytes 269568759 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662281 bytes 269568759 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705911 bytes 151299334 (151.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905745 bytes 323127904 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662364 bytes 269580308 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662364 bytes 269580308 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705931 bytes 151304257 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905772 bytes 323131729 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705931 bytes 151304257 (151.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905772 bytes 323131729 (323.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662380 bytes 269581484 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662380 bytes 269581484 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705951 bytes 151309274 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905799 bytes 323135581 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662400 bytes 269582900 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662400 bytes 269582900 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705971 bytes 151314197 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905827 bytes 323139472 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 705971 bytes 151314197 (151.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905827 bytes 323139472 (323.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662417 bytes 269584136 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662417 bytes 269584136 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 705992 bytes 151319228 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905856 bytes 323143454 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662438 bytes 269585612 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662438 bytes 269585612 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706029 bytes 151325922 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905900 bytes 323148595 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706029 bytes 151325922 (151.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905900 bytes 323148595 (323.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662458 bytes 269587616 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662458 bytes 269587616 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706058 bytes 151333054 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905936 bytes 323154416 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662484 bytes 269589448 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662484 bytes 269589448 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706076 bytes 151337845 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 905963 bytes 323158253 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706076 bytes 151337845 (151.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 905963 bytes 323158253 (323.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662501 bytes 269590684 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662501 bytes 269590684 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706113 bytes 151346671 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906011 bytes 323165869 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662521 bytes 269592176 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662521 bytes 269592176 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706134 bytes 151351694 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906040 bytes 323169840 (323.1 MBsudo: no tty present and no askpass program specified )\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662537 bytes 269593352 (269.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662537 bytes 269593352 (269.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706134 bytes 151351694 (151.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906040 bytes 323169840 (323.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662537 bytes 269593352 (269.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662537 bytes 269593352 (269.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisisudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706192 bytes 151362877 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906116 bytes 323180929 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662620 bytes 269604901 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662620 bytes 269604901 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706213 bytes 151367917 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906143 bytes 323184754 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706213 bytes 151367917 (151.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906143 bytes 323184754 (323.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662636 bytes 269606077 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662636 bytes 269606077 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706259 bytes 151377595 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906201 bytes 323194304 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662699 bytes 269615860 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662699 bytes 269615860 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706278 bytes 151382452 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906228 bytes 323198129 (323.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706278 bytes 151382452 (151.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906228 bytes 323198129 (323.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662720 bytes 269617336 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662720 bytes 269617336 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706299 bytes 151387535 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906255 bytes 323201980 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662741 bytes 269618812 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662741 bytes 269618812 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706332 bytes 151393840 (151.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906295 bytes 323206830 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706332 bytes 151393840 (151.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906295 bytes 323206830 (323.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662761 bytes 269620816 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662761 bytes 269620816 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706367 bytes 151401559 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906334 bytes 323212855 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662781 bytes 269622288 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662781 bytes 269622288 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706384 bytes 151406218 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906358 bytes 323216478 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706384 bytes 151406218 (151.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906358 bytes 323216478 (323.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662797 bytes 269623464 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662797 bytes 269623464 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706405 bytes 151411268 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906388 bytes 323220528 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662818 bytes 269624940 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662818 bytes 269624940 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706426 bytes 151416288 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906416 bytes 323224426 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662836 bytes 269626236 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662836 bytes 269626236 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706426 bytes 151416288 (151.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906416 bytes 323224426 (323.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662836 bytes 269626236 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662836 bytes 269626236 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ethsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706486 bytes 151427530 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906489 bytes 323234079 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662873 bytes 269629238 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662873 bytes 269629238 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706509 bytes 151432760 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906517 bytes 323237984 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706509 bytes 151432760 (151.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906517 bytes 323237984 (323.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662889 bytes 269630414 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662889 bytes 269630414 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706527 bytes 151437516 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906544 bytes 323241835 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662905 bytes 269631590 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662905 bytes 269631590 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706549 bytes 151442665 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906572 bytes 323245741 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706549 bytes 151442665 (151.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906572 bytes 323245741 (323.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662926 bytes 269633066 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662926 bytes 269633066 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706569 bytes 151447619 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906599 bytes 323249593 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662946 bytes 269634482 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662946 bytes 269634482 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706602 bytes 151453924 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906639 bytes 323254452 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706602 bytes 151453924 (151.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906639 bytes 323254452 (323.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 662967 bytes 269636546 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 662967 bytes 269636546 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706632 bytes 151461216 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906674 bytes 323260226 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 662987 bytes 269638018 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 662987 bytes 269638018 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706651 bytes 151466070 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906700 bytes 323264009 (323.2 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706651 bytes 151466070 (151.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906700 bytes 323264009 (323.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663003 bytes 269639194 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663003 bytes 269639194 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706671 bytes 151471036 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906728 bytes 323267926 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663019 bytes 269640370 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663019 bytes 269640370 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706694 bytes 151476282 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906757 bytes 323271912 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706694 bytes 151476282 (151.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906757 bytes 323271912 (323.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663035 bytes 269641546 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663035 bytes 269641546 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706733 bytes 151483285 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906804 bytes 323277463 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663077 bytes 269644840 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663077 bytes 269644840 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706753 bytes 151488256 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906831 bytes 323281312 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706753 bytes 151488256 (151.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906831 bytes 323281312 (323.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663095 bytes 269646136 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663095 bytes 269646136 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706793 bytes 151497268 (151.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906882 bytes 323289054 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663115 bytes 269647628 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663115 bytes 269647628 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706815 bytes 151502391 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906911 bytes 323293029 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706815 bytes 151502391 (151.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906911 bytes 323293029 (323.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663136 bytes 269649104 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663136 bytes 269649104 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706836 bytes 151507374 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906939 bytes 323296888 (323.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663152 bytes 269650280 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663152 bytes 269650280 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706874 bytes 151514084 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 906981 bytes 323301861 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706874 bytes 151514084 (151.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 906981 bytes 323301861 (323.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663177 bytes 269652584 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663177 bytes 269652584 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706902 bytes 151521187 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907016 bytes 323307635 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663193 bytes 269653740 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663193 bytes 269653740 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706923 bytes 151526213 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907045 bytes 323311595 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706923 bytes 151526213 (151.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907045 bytes 323311595 (323.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663209 bytes 269654916 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663209 bytes 269654916 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706944 bytes 151531253 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907073 bytes 323315485 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663225 bytes 269656092 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663225 bytes 269656092 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 706966 bytes 151536476 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907101 bytes 323319443 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 706966 bytes 151536476 (151.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907101 bytes 323319443 (323.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663241 bytes 269657268 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663241 bytes 269657268 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707008 bytes 151543708 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907153 bytes 323325171 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663279 bytes 269660314 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663279 bytes 269660314 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707029 bytes 151548785 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907180 bytes 323329035 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707029 bytes 151548785 (151.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907180 bytes 323329035 (323.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663295 bytes 269661490 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663295 bytes 269661490 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707048 bytes 151553648 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907206 bytes 323332817 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663314 bytes 269662846 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663314 bytes 269662846 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707067 bytes 151558561 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907234 bytes 323336765 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707067 bytes 151558561 (151.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907234 bytes 323336765 (323.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663336 bytes 269664382 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663336 bytes 269664382 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707089 bytes 151563673 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907261 bytes 323340590 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663355 bytes 269665738 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663355 bytes 269665738 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707148 bytes 151574485 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907327 bytes 323349513 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707148 bytes 151574485 (151.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907327 bytes 323349513 (323.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663384 bytes 269668358 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663384 bytes 269668358 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707196 bytes 151585849 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907394 bytes 323361052 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663450 bytes 269678385 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663450 bytes 269678385 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707217 bytes 151590920 (151.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907421 bytes 323364904 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707217 bytes 151590920 (151.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907421 bytes 323364904 (323.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663466 bytes 269679561 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663466 bytes 269679561 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707256 bytes 151600069 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907477 bytes 323374253 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663530 bytes 269689396 (269.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663530 bytes 269689396 (269.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707277 bytes 151605101 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907506 bytes 323378225 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707277 bytes 151605101 (151.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907506 bytes 323378225 (323.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663546 bytes 269690572 (269.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663546 bytes 269690572 (269.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707344 bytes 151616968 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907587 bytes 323389497 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663632 bytes 269702275 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663632 bytes 269702275 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707364 bytes 151621934 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907614 bytes 323393348 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707364 bytes 151621934 (151.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907614 bytes 323393348 (323.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663648 bytes 269703451 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663648 bytes 269703451 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707385 bytes 151626947 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907642 bytes 323397263 (323.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663664 bytes 269704627 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663664 bytes 269704627 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707407 bytes 151632084 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907670 bytes 323401169 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707407 bytes 151632084 (151.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907670 bytes 323401169 (323.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663680 bytes 269705803 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663680 bytes 269705803 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707425 bytes 151636875 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907695 bytes 323404866 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663701 bytes 269707279 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663701 bytes 269707279 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707460 bytes 151643346 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907737 bytes 323409852 (323.4 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707460 bytes 151643346 (151.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907737 bytes 323409852 (323.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663732 bytes 269709943 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663732 bytes 269709943 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707490 bytes 151650684 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907778 bytes 323416124 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663755 bytes 269711599 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663755 bytes 269711599 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707529 bytes 151659735 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907833 bytes 323424254 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707529 bytes 151659735 (151.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907833 bytes 323424254 (323.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663776 bytes 269713153 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663776 bytes 269713153 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707569 bytes 151668975 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907888 bytes 323433556 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663836 bytes 269722680 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663836 bytes 269722680 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707589 bytes 151673955 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907914 bytes 323437339 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707589 bytes 151673955 (151.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 907914 bytes 323437339 (323.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663852 bytes 269723856 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663852 bytes 269723856 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707648 bytes 151685263 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 907994 bytes 323448569 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663936 bytes 269735455 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663936 bytes 269735455 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707670 bytes 151690343 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908023 bytes 323452539 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707670 bytes 151690343 (151.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908023 bytes 323452539 (323.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663952 bytes 269736631 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663952 bytes 269736631 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707693 bytes 151695594 (151.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908052 bytes 323456542 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 663968 bytes 269737807 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 663968 bytes 269737807 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707713 bytes 151700517 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908080 bytes 323460433 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707713 bytes 151700517 (151.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908080 bytes 323460433 (323.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 663984 bytes 269738983 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 663984 bytes 269738983 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707734 bytes 151705500 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908109 bytes 323464366 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664005 bytes 269740459 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664005 bytes 269740459 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707770 bytes 151712139 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908150 bytes 323469324 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707770 bytes 151712139 (151.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908150 bytes 323469324 (323.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664028 bytes 269742643 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664028 bytes 269742643 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707799 bytes 151719271 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908187 bytes 323475211 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664050 bytes 269744235 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664050 bytes 269744235 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707820 bytes 151724291 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908215 bytes 323479117 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707820 bytes 151724291 (151.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908215 bytes 323479117 (323.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664072 bytes 269745771 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664072 bytes 269745771 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707841 bytes 151729331 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908242 bytes 323482942 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664089 bytes 269747007 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664089 bytes 269747007 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707880 bytes 151738263 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908294 bytes 323490777 (323.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707880 bytes 151738263 (151.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908294 bytes 323490777 (323.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664109 bytes 269748499 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664109 bytes 269748499 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707940 bytes 151749587 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908369 bytes 323502396 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664192 bytes 269760048 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664192 bytes 269760048 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707962 bytes 151754736 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908398 bytes 323506368 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 707962 bytes 151754736 (151.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908398 bytes 323506368 (323.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664208 bytes 269761224 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664208 bytes 269761224 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 707982 bytes 151759659 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908425 bytes 323510193 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664224 bytes 269762400 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664224 bytes 269762400 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708003 bytes 151764732 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908453 bytes 323514137 (323.5 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708003 bytes 151764732 (151.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908453 bytes 323514137 (323.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664240 bytes 269763576 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664240 bytes 269763576 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708023 bytes 151769712 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908478 bytes 323517813 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664257 bytes 269764736 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664257 bytes 269764736 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708057 bytes 151776083 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908519 bytes 323522725 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708057 bytes 151776083 (151.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908519 bytes 323522725 (323.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664277 bytes 269766740 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664277 bytes 269766740 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708091 bytes 151783736 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908558 bytes 323528773 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664302 bytes 269768512 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664302 bytes 269768512 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708108 bytes 151788395 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908584 bytes 323532536 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708108 bytes 151788395 (151.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908584 bytes 323532536 (323.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664318 bytes 269769688 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664318 bytes 269769688 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708128 bytes 151793349 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908611 bytes 323536388 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664334 bytes 269770864 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664334 bytes 269770864 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708148 bytes 151798272 (151.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908638 bytes 323540213 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708148 bytes 151798272 (151.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908638 bytes 323540213 (323.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664355 bytes 269772340 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664355 bytes 269772340 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708191 bytes 151805609 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908690 bytes 323545941 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664395 bytes 269775504 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664395 bytes 269775504 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708229 bytes 151814537 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908743 bytes 323553900 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708229 bytes 151814537 (151.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908743 bytes 323553900 (323.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664415 bytes 269776996 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664415 bytes 269776996 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708267 bytes 151823657 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908800 bytes 323563350 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664478 bytes 269786779 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664478 bytes 269786779 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708289 bytes 151828794 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908829 bytes 323567322 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708289 bytes 151828794 (151.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908829 bytes 323567322 (323.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664494 bytes 269787955 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664494 bytes 269787955 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708309 bytes 151833717 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908857 bytes 323571213 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664512 bytes 269789251 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664512 bytes 269789251 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708343 bytes 151840088 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908899 bytes 323576192 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708343 bytes 151840088 (151.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908899 bytes 323576192 (323.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664535 bytes 269791435 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664535 bytes 269791435 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708374 bytes 151847562 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908938 bytes 323582293 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664560 bytes 269793207 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664560 bytes 269793207 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708394 bytes 151852528 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908964 bytes 323586071 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708394 bytes 151852528 (151.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 908964 bytes 323586071 (323.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664576 bytes 269794383 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664576 bytes 269794383 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708414 bytes 151857482 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 908991 bytes 323589923 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664592 bytes 269795559 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664592 bytes 269795559 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708435 bytes 151862522 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909018 bytes 323593747 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708435 bytes 151862522 (151.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909018 bytes 323593747 (323.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664608 bytes 269796735 (269.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664608 bytes 269796735 (269.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708475 bytes 151869591 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909066 bytes 323599351 (323.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664645 bytes 269799729 (269.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664645 bytes 269799729 (269.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708495 bytes 151874557 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909094 bytes 323603269 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708495 bytes 151874557 (151.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909094 bytes 323603269 (323.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664666 bytes 269801205 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664666 bytes 269801205 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708517 bytes 151879785 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909123 bytes 323607300 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664684 bytes 269802501 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664684 bytes 269802501 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708556 bytes 151888729 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909173 bytes 323614987 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708556 bytes 151888729 (151.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909173 bytes 323614987 (323.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664704 bytes 269803993 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664704 bytes 269803993 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708594 bytes 151897782 (151.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909229 bytes 323624356 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664765 bytes 269813672 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664765 bytes 269813672 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708629 bytes 151904303 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909270 bytes 323629307 (323.6 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708629 bytes 151904303 (151.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909270 bytes 323629307 (323.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664790 bytes 269815976 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664790 bytes 269815976 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708678 bytes 151915769 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909338 bytes 323640842 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664863 bytes 269826407 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664863 bytes 269826407 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708697 bytes 151920663 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909364 bytes 323644611 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708697 bytes 151920663 (151.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909364 bytes 323644611 (323.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664875 bytes 269827275 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664875 bytes 269827275 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708739 bytes 151930198 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909423 bytes 323654215 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 664939 bytes 269837110 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 664939 bytes 269837110 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708758 bytes 151935055 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909449 bytes 323657985 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708758 bytes 151935055 (151.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909449 bytes 323657985 (323.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 664955 bytes 269838286 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 664955 bytes 269838286 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708817 bytes 151946399 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909526 bytes 323669148 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665039 bytes 269849887 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665039 bytes 269849887 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708838 bytes 151951488 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909554 bytes 323673066 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708838 bytes 151951488 (151.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909554 bytes 323673066 (323.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665055 bytes 269851063 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665055 bytes 269851063 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708860 bytes 151956617 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909583 bytes 323677053 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665071 bytes 269852239 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665071 bytes 269852239 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708880 bytes 151961540 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909610 bytes 323680878 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708880 bytes 151961540 (151.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909610 bytes 323680878 (323.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665091 bytes 269853655 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665091 bytes 269853655 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708901 bytes 151966630 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909637 bytes 323684741 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665110 bytes 269855011 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665110 bytes 269855011 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 708935 bytes 151973001 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909679 bytes 323689720 (323.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 708935 bytes 151973001 (151.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909679 bytes 323689720 (323.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665135 bytes 269857315 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665135 bytes 269857315 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709002 bytes 151988301 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909771 bytes 323705134 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665207 bytes 269867786 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665207 bytes 269867786 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709024 bytes 151993481 (151.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909799 bytes 323709067 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709024 bytes 151993481 (151.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909799 bytes 323709067 (323.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665225 bytes 269869082 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665225 bytes 269869082 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709063 bytes 152002630 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909856 bytes 323718490 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665288 bytes 269878865 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665288 bytes 269878865 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709083 bytes 152007553 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909882 bytes 323722240 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709083 bytes 152007553 (152.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909882 bytes 323722240 (323.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665304 bytes 269880041 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665304 bytes 269880041 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709144 bytes 152019043 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909960 bytes 323733400 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665387 bytes 269891588 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665387 bytes 269891588 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709163 bytes 152023900 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 909986 bytes 323737163 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709163 bytes 152023900 (152.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 909986 bytes 323737163 (323.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665403 bytes 269892764 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665403 bytes 269892764 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709183 bytes 152028854 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910014 bytes 323741061 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665419 bytes 269893940 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665419 bytes 269893940 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709209 bytes 152034297 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910040 bytes 323744851 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709209 bytes 152034297 (152.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910040 bytes 323744851 (323.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665431 bytes 269894800 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665431 bytes 269894800 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709228 bytes 152039154 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910066 bytes 323748622 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665447 bytes 269895976 (269.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665447 bytes 269895976 (269.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709262 bytes 152045525 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910107 bytes 323753535 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709262 bytes 152045525 (152.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910107 bytes 323753535 (323.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665471 bytes 269898220 (269.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665471 bytes 269898220 (269.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709292 bytes 152052811 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910147 bytes 323759730 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665500 bytes 269900236 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665500 bytes 269900236 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709312 bytes 152057734 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910177 bytes 323763793 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709312 bytes 152057734 (152.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910177 bytes 323763793 (323.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665523 bytes 269901834 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665523 bytes 269901834 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709349 bytes 152066602 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910229 bytes 323771698 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665543 bytes 269903326 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665543 bytes 269903326 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709370 bytes 152071642 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910256 bytes 323775523 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709370 bytes 152071642 (152.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910256 bytes 323775523 (323.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665559 bytes 269904502 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665559 bytes 269904502 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709432 bytes 152083134 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910339 bytes 323786939 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665644 bytes 269916153 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665644 bytes 269916153 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709455 bytes 152088372 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910366 bytes 323790763 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709455 bytes 152088372 (152.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910366 bytes 323790763 (323.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665660 bytes 269917329 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665660 bytes 269917329 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709473 bytes 152093097 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910393 bytes 323794587 (323.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665676 bytes 269918505 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665676 bytes 269918505 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709494 bytes 152098174 (152.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910422 bytes 323798615 (323.7 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709494 bytes 152098174 (152.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910422 bytes 323798615 (323.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665692 bytes 269919681 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665692 bytes 269919681 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709512 bytes 152102965 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910448 bytes 323802386 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665708 bytes 269920857 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665708 bytes 269920857 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709547 bytes 152109490 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910489 bytes 323807338 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709547 bytes 152109490 (152.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910489 bytes 323807338 (323.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665728 bytes 269922861 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665728 bytes 269922861 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709575 bytes 152116604 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910524 bytes 323813147 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665753 bytes 269924633 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665753 bytes 269924633 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709595 bytes 152121558 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910552 bytes 323817065 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709595 bytes 152121558 (152.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910552 bytes 323817065 (323.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665774 bytes 269926109 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665774 bytes 269926109 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709617 bytes 152126707 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910580 bytes 323820970 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665796 bytes 269927645 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665796 bytes 269927645 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709635 bytes 152131504 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910606 bytes 323824764 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709635 bytes 152131504 (152.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910606 bytes 323824764 (323.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665813 bytes 269928881 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665813 bytes 269928881 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709692 bytes 152142407 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910680 bytes 323834298 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665855 bytes 269932241 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665855 bytes 269932241 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709713 bytes 152147478 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910706 bytes 323838076 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709713 bytes 152147478 (152.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910706 bytes 323838076 (323.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665871 bytes 269933417 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665871 bytes 269933417 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709733 bytes 152152444 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910733 bytes 323841920 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665887 bytes 269934593 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665887 bytes 269934593 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709753 bytes 152157367 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910760 bytes 323845745 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709753 bytes 152157367 (152.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910760 bytes 323845745 (323.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665903 bytes 269935769 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665903 bytes 269935769 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709777 bytes 152162673 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910790 bytes 323849766 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665919 bytes 269936945 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665919 bytes 269936945 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709812 bytes 152169160 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910831 bytes 323854729 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709812 bytes 152169160 (152.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910831 bytes 323854729 (323.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665939 bytes 269938949 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665939 bytes 269938949 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709841 bytes 152176329 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910867 bytes 323860557 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665960 bytes 269940413 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665960 bytes 269940413 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709861 bytes 152181303 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910893 bytes 323864328 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709861 bytes 152181303 (152.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910893 bytes 323864328 (323.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 665980 bytes 269941829 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 665980 bytes 269941829 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709881 bytes 152186220 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910920 bytes 323868164 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 665997 bytes 269943065 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 665997 bytes 269943065 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709900 bytes 152191083 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910947 bytes 323872012 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709900 bytes 152191083 (152.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 910947 bytes 323872012 (323.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 666013 bytes 269944241 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 666013 bytes 269944241 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709942 bytes 152198366 (152.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 910998 bytes 323877686 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666057 bytes 269947647 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666057 bytes 269947647 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 709964 bytes 152203495 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911027 bytes 323881673 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 709964 bytes 152203495 (152.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 911027 bytes 323881673 (323.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 666074 bytes 269948883 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 666074 bytes 269948883 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710003 bytes 152212427 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911078 bytes 323889445 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666094 bytes 269950375 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666094 bytes 269950375 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710022 bytes 152217341 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911104 bytes 323893240 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 710022 bytes 152217341 (152.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 911104 bytes 323893240 (323.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 666110 bytes 269951551 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 666110 bytes 269951551 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710041 bytes 152222198 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911130 bytes 323897011 (323.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666126 bytes 269952727 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666126 bytes 269952727 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710076 bytes 152228709 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911172 bytes 323902032 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 710076 bytes 152228709 (152.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 911172 bytes 323902032 (323.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 666146 bytes 269954731 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 666146 bytes 269954731 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710105 bytes 152235929 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911207 bytes 323907838 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666171 bytes 269956503 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666171 bytes 269956503 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710125 bytes 152240846 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911234 bytes 323911643 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 710125 bytes 152240846 (152.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 911234 bytes 323911643 (323.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 666187 bytes 269957679 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 666187 bytes 269957679 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710145 bytes 152245769 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911261 bytes 323915468 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666208 bytes 269959155 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666208 bytes 269959155 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710168 bytes 152250960 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911291 bytes 323919470 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 710168 bytes 152250960 (152.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 911291 bytes 323919470 (323.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 666224 bytes 269960331 (269.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 666224 bytes 269960331 (269.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710211 bytes 152258289 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911344 bytes 323925271 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666262 bytes 269963377 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666262 bytes 269963377 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710231 bytes 152263212 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911370 bytes 323928990 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710246 bytes 152264512 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911392 bytes 323930617 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666295 bytes 269965713 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666295 bytes 269965713 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtusudo: no tty present and no askpass program specified Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 346, in _make_request self._validate_conn(conn) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 852, in _validate_conn conn.connect() File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 298, in connect conn = self._new_conn() File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 153, in _new_conn self, "Failed to establish a new connection: %s" % e) urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/requests/adapters.py", line 450, in send timeout=timeout File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 639, in urlopen _stacktrace=sys.exc_info()[2]) File "/usr/lib/python3/dist-packages/urllib3/util/retry.py", line 398, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 85, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 208, in insertInfoOnDB r = requests.post(requete, data=data) File "/usr/local/lib/python3.6/dist-packages/requests/api.py", line 117, in post return request('post', url, data=data, json=json, **kwargs) File "/usr/local/lib/python3.6/dist-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/usr/local/lib/python3.6/dist-packages/requests/sessions.py", line 529, in request resp = self.send(prep, **send_kwargs) File "/usr/local/lib/python3.6/dist-packages/requests/sessions.py", line 645, in send r = adapter.send(request, **kwargs) File "/usr/local/lib/python3.6/dist-packages/requests/adapters.py", line 519, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_configsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710257 bytes 152265406 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911412 bytes 323932065 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666313 bytes 269967009 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666313 bytes 269967009 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 346, in _make_request self._validate_conn(conn) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 852, in _validate_conn conn.connect() File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 298, in connect conn = self._new_conn() Fisudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () /08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710277 bytes 152266980 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911439 bytes 323934113 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666333 bytes 269968501 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666333 bytes 269968501 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 346, in _make_request self._validate_conn(conn) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 852, in _validate_conn conn.connect() File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 298, in connect conn = self._new_conn() File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 153, in _nesudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710306 bytes 152269668 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911480 bytes 323937142 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666357 bytes 269970821 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666357 bytes 269970821 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710354 bytes 152281228 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911550 bytes 323947706 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666389 bytes 269973145 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666389 bytes 269973145 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710377 bytes 152286775 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911585 bytes 323952195 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666410 bytes 269974677 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666410 bytes 269974677 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710398 bytes 152292125 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911616 bytes 323956355 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666435 bytes 269976449 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666435 bytes 269976449 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710419 bytes 152297518 (152.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911649 bytes 323960682 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666455 bytes 269977921 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666455 bytes 269977921 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710453 bytes 152304230 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911701 bytes 323966888 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666482 bytes 269980393 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666482 bytes 269980393 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710490 bytes 152313338 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911760 bytes 323975506 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666510 bytes 269982389 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666510 bytes 269982389 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710512 bytes 152318777 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911794 bytes 323979895 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666530 bytes 269983861 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666530 bytes 269983861 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710531 bytes 152323944 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911825 bytes 323984056 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666550 bytes 269985333 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666550 bytes 269985333 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710553 bytes 152329354 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911857 bytes 323988283 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666574 bytes 269987045 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666574 bytes 269987045 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710588 bytes 152336138 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911902 bytes 323993539 (323.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666601 bytes 269989525 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666601 bytes 269989525 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710637 bytes 152347711 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 911971 bytes 324003980 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666629 bytes 269991609 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666629 bytes 269991609 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710660 bytes 152353267 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912004 bytes 324008303 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666654 bytes 269993381 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666654 bytes 269993381 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710682 bytes 152358657 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912037 bytes 324012587 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666679 bytes 269995153 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666679 bytes 269995153 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710702 bytes 152363884 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912069 bytes 324016790 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666699 bytes 269996625 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666699 bytes 269996625 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710744 bytes 152371187 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912114 bytes 324022013 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666723 bytes 269998925 (269.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666723 bytes 269998925 (269.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710772 bytes 152377269 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912157 bytes 324027041 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666761 bytes 270001437 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666761 bytes 270001437 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710793 bytes 152382556 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912191 bytes 324031352 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666781 bytes 270002909 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666781 bytes 270002909 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710814 bytes 152387949 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912222 bytes 324035520 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666801 bytes 270004381 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666801 bytes 270004381 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710833 bytes 152393122 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912252 bytes 324039599 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666817 bytes 270005545 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666817 bytes 270005545 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710867 bytes 152399834 (152.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912298 bytes 324044929 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666841 bytes 270007845 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666841 bytes 270007845 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710898 bytes 152407554 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912344 bytes 324051591 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666870 bytes 270009917 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666870 bytes 270009917 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710918 bytes 152412830 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912378 bytes 324056005 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666899 bytes 270011931 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666899 bytes 270011931 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710937 bytes 152417997 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912409 bytes 324060166 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666924 bytes 270013703 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666924 bytes 270013703 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 710979 bytes 152427570 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912470 bytes 324068653 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666949 bytes 270015551 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666949 bytes 270015551 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711014 bytes 152434342 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912517 bytes 324074017 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 666973 bytes 270017851 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 666973 bytes 270017851 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711043 bytes 152440490 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912556 bytes 324078951 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667010 bytes 270020313 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667010 bytes 270020313 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711064 bytes 152445840 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912587 bytes 324083112 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667030 bytes 270021785 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667030 bytes 270021785 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711088 bytes 152451453 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912622 bytes 324087574 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667050 bytes 270023257 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667050 bytes 270023257 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711109 bytes 152456783 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912655 bytes 324091881 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667070 bytes 270024729 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667070 bytes 270024729 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711144 bytes 152463581 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912699 bytes 324097056 (324.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667094 bytes 270027029 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667094 bytes 270027029 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711173 bytes 152471054 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912741 bytes 324103359 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667118 bytes 270028797 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667118 bytes 270028797 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711195 bytes 152476506 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912774 bytes 324107707 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667143 bytes 270030569 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667143 bytes 270030569 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711216 bytes 152481880 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912806 bytes 324111950 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667163 bytes 270032041 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667163 bytes 270032041 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711238 bytes 152487313 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912840 bytes 324116307 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667194 bytes 270034173 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667194 bytes 270034173 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711271 bytes 152493928 (152.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912887 bytes 324122866 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667215 bytes 270036217 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667215 bytes 270036217 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711318 bytes 152504058 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 912953 bytes 324131898 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667256 bytes 270038995 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667256 bytes 270038995 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 144, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 83, in create_connection raise err File "/usr/lib/python3/dist-packages/urllib3/util/connection.py", line 73, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 601, in urlopen chunked=chunked) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 357, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1285, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711359 bytes 152514664 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913019 bytes 324140514 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667296 bytes 270041939 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667296 bytes 270041939 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Etsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711382 bytes 152519824 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913045 bytes 324144253 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667312 bytes 270043115 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667312 bytes 270043115 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711417 bytes 152526292 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913088 bytes 324149313 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 711417 bytes 152526292 (152.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913088 bytes 324149313 (324.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 667332 bytes 270045119 (270.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 667332 bytes 270045119 (270.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711447 bytes 152533533 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913125 bytes 324155214 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667352 bytes 270046591 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667352 bytes 270046591 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711471 bytes 152538846 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913155 bytes 324159261 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 711471 bytes 152538846 (152.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913155 bytes 324159261 (324.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 667371 bytes 270047947 (270.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 667371 bytes 270047947 (270.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711491 bytes 152543812 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913183 bytes 324163179 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667389 bytes 270049243 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667389 bytes 270049243 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711511 bytes 152548735 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913210 bytes 324167004 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 711511 bytes 152548735 (152.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913210 bytes 324167004 (324.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 667410 bytes 270050719 (270.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 667410 bytes 270050719 (270.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711546 bytes 152555223 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913252 bytes 324171983 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667430 bytes 270052723 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667430 bytes 270052723 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711573 bytes 152560953 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913287 bytes 324176580 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 711573 bytes 152560953 (152.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913287 bytes 324176580 (324.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 667469 bytes 270055249 (270.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 667469 bytes 270055249 (270.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711594 bytes 152565973 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913315 bytes 324180485 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667486 bytes 270056485 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667486 bytes 270056485 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711632 bytes 152574865 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913363 bytes 324188089 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 711632 bytes 152574865 (152.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913363 bytes 324188089 (324.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 667506 bytes 270057977 (270.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 667506 bytes 270057977 (270.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711671 bytes 152584014 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913419 bytes 324197438 (324.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667569 bytes 270067760 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667569 bytes 270067760 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711705 bytes 152590428 (152.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913461 bytes 324202444 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 711705 bytes 152590428 (152.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913461 bytes 324202444 (324.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 667589 bytes 270069764 (270.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 667589 bytes 270069764 (270.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711755 bytes 152602128 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913528 bytes 324214000 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667657 bytes 270079895 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667657 bytes 270079895 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711777 bytes 152607257 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913557 bytes 324217986 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 711777 bytes 152607257 (152.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913557 bytes 324217986 (324.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 667673 bytes 270081071 (270.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 667673 bytes 270081071 (270.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711811 bytes 152616070 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913613 bytes 324227357 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667739 bytes 270091042 (270.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667739 bytes 270091042 (270.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711832 bytes 152621141 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913639 bytes 324231127 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 711832 bytes 152621141 (152.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913639 bytes 324231127 (324.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 667760 bytes 270092518 (270.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 667760 bytes 270092518 (270.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711883 bytes 152631673 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913711 bytes 324241677 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667827 bytes 270103129 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667827 bytes 270103129 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711908 bytes 152637234 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913742 bytes 324246012 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 711908 bytes 152637234 (152.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913742 bytes 324246012 (324.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 667860 bytes 270105293 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 667860 bytes 270105293 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711927 bytes 152642142 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913769 bytes 324249849 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667876 bytes 270106469 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667876 bytes 270106469 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711947 bytes 152647065 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913796 bytes 324253690 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 711947 bytes 152647065 (152.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913796 bytes 324253690 (324.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 667896 bytes 270107856 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 667896 bytes 270107856 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 711967 bytes 152652079 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913823 bytes 324257554 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 667911 bytes 270108933 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 667911 bytes 270108933 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712019 bytes 152662453 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913887 bytes 324266381 (324.2 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712019 bytes 152662453 (152.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913887 bytes 324266381 (324.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 667935 bytes 270111253 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 667935 bytes 270111253 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712066 bytes 152673701 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913954 bytes 324277868 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668003 bytes 270121384 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668003 bytes 270121384 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712095 bytes 152679256 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 913986 bytes 324282073 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712095 bytes 152679256 (152.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 913986 bytes 324282073 (324.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668047 bytes 270124772 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668047 bytes 270124772 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712118 bytes 152684513 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914011 bytes 324285799 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668067 bytes 270126264 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668067 bytes 270126264 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712138 bytes 152689567 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914033 bytes 324289339 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712138 bytes 152689567 (152.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914033 bytes 324289339 (324.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668086 bytes 270127620 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668086 bytes 270127620 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712172 bytes 152695975 (152.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914069 bytes 324293921 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668108 bytes 270129744 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668108 bytes 270129744 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712198 bytes 152701702 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914096 bytes 324297967 (324.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712198 bytes 152701702 (152.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914096 bytes 324297967 (324.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668137 bytes 270131592 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668137 bytes 270131592 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712216 bytes 152706499 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914116 bytes 324301326 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668153 bytes 270132768 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668153 bytes 270132768 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712234 bytes 152711326 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914136 bytes 324304700 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712234 bytes 152711326 (152.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914136 bytes 324304700 (324.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668165 bytes 270133628 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668165 bytes 270133628 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712256 bytes 152716475 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914159 bytes 324308235 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668181 bytes 270134804 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668181 bytes 270134804 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712289 bytes 152722823 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914195 bytes 324312809 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712289 bytes 152722823 (152.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914195 bytes 324312809 (324.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668202 bytes 270136792 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668202 bytes 270136792 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712319 bytes 152730064 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914227 bytes 324318341 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668224 bytes 270138384 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668224 bytes 270138384 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712361 bytes 152739319 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914274 bytes 324325844 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712361 bytes 152739319 (152.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914274 bytes 324325844 (324.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668240 bytes 270139560 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668240 bytes 270139560 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712401 bytes 152748597 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914328 bytes 324335092 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668302 bytes 270149291 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668302 bytes 270149291 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712419 bytes 152753400 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914348 bytes 324338431 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712419 bytes 152753400 (152.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914348 bytes 324338431 (324.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668314 bytes 270150151 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668314 bytes 270150151 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712470 bytes 152763965 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914414 bytes 324348591 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668383 bytes 270160798 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668383 bytes 270160798 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712495 bytes 152769526 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914442 bytes 324352664 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712495 bytes 152769526 (152.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914442 bytes 324352664 (324.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668412 bytes 270162648 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668412 bytes 270162648 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712532 bytes 152778542 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914492 bytes 324361628 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668475 bytes 270172431 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668475 bytes 270172431 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712554 bytes 152783728 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914516 bytes 324365237 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712554 bytes 152783728 (152.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914516 bytes 324365237 (324.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668487 bytes 270173291 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668487 bytes 270173291 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712572 bytes 152788525 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914537 bytes 324368629 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668499 bytes 270174151 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668499 bytes 270174151 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712605 bytes 152794836 (152.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914573 bytes 324373163 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712605 bytes 152794836 (152.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914573 bytes 324373163 (324.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668515 bytes 270175839 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668515 bytes 270175839 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712634 bytes 152802056 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914607 bytes 324378911 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668533 bytes 270177119 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668533 bytes 270177119 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712653 bytes 152806904 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914631 bytes 324382538 (324.3 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712653 bytes 152806904 (152.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914631 bytes 324382538 (324.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668554 bytes 270178597 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668554 bytes 270178597 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712671 bytes 152811695 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914652 bytes 324385939 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668573 bytes 270179953 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668573 bytes 270179953 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712692 bytes 152816784 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914675 bytes 324389466 (324.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712692 bytes 152816784 (152.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914675 bytes 324389466 (324.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668585 bytes 270180813 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668585 bytes 270180813 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712764 bytes 152831403 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914767 bytes 324403659 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668658 bytes 270191776 (270.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668658 bytes 270191776 (270.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712790 bytes 152837049 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914800 bytes 324407921 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712790 bytes 152837049 (152.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914800 bytes 324407921 (324.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668688 bytes 270193676 (270.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668688 bytes 270193676 (270.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712827 bytes 152846091 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914851 bytes 324416900 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668747 bytes 270203143 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668747 bytes 270203143 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712847 bytes 152851014 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914871 bytes 324420207 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712847 bytes 152851014 (152.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914871 bytes 324420207 (324.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668759 bytes 270204003 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668759 bytes 270204003 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712869 bytes 152856160 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914895 bytes 324423841 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668775 bytes 270205179 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668775 bytes 270205179 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712902 bytes 152862528 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914929 bytes 324428268 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712902 bytes 152862528 (152.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914929 bytes 324428268 (324.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668791 bytes 270206867 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668791 bytes 270206867 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712931 bytes 152869697 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914961 bytes 324433792 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668807 bytes 270208023 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668807 bytes 270208023 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712950 bytes 152874582 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 914982 bytes 324437200 (324.4 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712950 bytes 152874582 (152.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 914982 bytes 324437200 (324.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668819 bytes 270208883 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668819 bytes 270208883 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712970 bytes 152879598 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915003 bytes 324440618 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668835 bytes 270210059 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668835 bytes 270210059 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 712989 bytes 152884510 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915025 bytes 324444103 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 712989 bytes 152884510 (152.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915025 bytes 324444103 (324.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668847 bytes 270210919 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668847 bytes 270210919 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713021 bytes 152890786 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915059 bytes 324448524 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668874 bytes 270213267 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668874 bytes 270213267 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713047 bytes 152896507 (152.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915086 bytes 324452557 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713047 bytes 152896507 (152.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915086 bytes 324452557 (324.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668904 bytes 270215175 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668904 bytes 270215175 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713084 bytes 152905282 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915129 bytes 324459751 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668920 bytes 270216351 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668920 bytes 270216351 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713102 bytes 152910085 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915149 bytes 324463058 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713102 bytes 152910085 (152.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915149 bytes 324463058 (324.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668928 bytes 270216903 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668928 bytes 270216903 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713121 bytes 152914999 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915169 bytes 324466385 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668940 bytes 270217763 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668940 bytes 270217763 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713155 bytes 152921407 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915205 bytes 324470935 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713155 bytes 152921407 (152.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915205 bytes 324470935 (324.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668956 bytes 270219451 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668956 bytes 270219451 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713185 bytes 152928648 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915237 bytes 324476467 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 668976 bytes 270220923 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 668976 bytes 270220923 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713206 bytes 152933718 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915260 bytes 324480004 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713206 bytes 152933718 (152.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915260 bytes 324480004 (324.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 668988 bytes 270221783 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 668988 bytes 270221783 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713227 bytes 152938788 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915285 bytes 324483706 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669004 bytes 270222959 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669004 bytes 270222959 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713244 bytes 152943519 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915305 bytes 324487033 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713244 bytes 152943519 (152.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915305 bytes 324487033 (324.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669016 bytes 270223819 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669016 bytes 270223819 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713279 bytes 152950056 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915341 bytes 324491583 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669035 bytes 270225687 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669035 bytes 270225687 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713306 bytes 152955800 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915371 bytes 324495710 (324.4 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713306 bytes 152955800 (152.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915371 bytes 324495710 (324.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669067 bytes 270227709 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669067 bytes 270227709 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713324 bytes 152960574 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915393 bytes 324499160 (324.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669085 bytes 270228929 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669085 bytes 270228929 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713353 bytes 152968161 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915415 bytes 324502661 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713353 bytes 152968161 (152.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915415 bytes 324502661 (324.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669098 bytes 270229849 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669098 bytes 270229849 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713392 bytes 152977186 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915463 bytes 324510233 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669114 bytes 270231025 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669114 bytes 270231025 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713426 bytes 152983606 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915499 bytes 324514782 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713426 bytes 152983606 (152.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915499 bytes 324514782 (324.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669130 bytes 270232713 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669130 bytes 270232713 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713475 bytes 152995081 (152.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915559 bytes 324525756 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669194 bytes 270242528 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669194 bytes 270242528 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713495 bytes 153000041 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915582 bytes 324529284 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713495 bytes 153000041 (153.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915582 bytes 324529284 (324.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669206 bytes 270243388 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669206 bytes 270243388 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713534 bytes 153009190 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915634 bytes 324538337 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669270 bytes 270253223 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669270 bytes 270253223 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713553 bytes 153014104 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915655 bytes 324541730 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713553 bytes 153014104 (153.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915655 bytes 324541730 (324.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669282 bytes 270254083 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669282 bytes 270254083 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713612 bytes 153025134 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915721 bytes 324551866 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669344 bytes 270264326 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669344 bytes 270264326 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713638 bytes 153030780 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915752 bytes 324556008 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713638 bytes 153030780 (153.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915752 bytes 324556008 (324.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669379 bytes 270266526 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669379 bytes 270266526 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713677 bytes 153039973 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915803 bytes 324565006 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669438 bytes 270275993 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669438 bytes 270275993 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713696 bytes 153044836 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915825 bytes 324568453 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713696 bytes 153044836 (153.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915825 bytes 324568453 (324.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669450 bytes 270276853 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669450 bytes 270276853 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713715 bytes 153049742 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915847 bytes 324571915 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669468 bytes 270278073 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669468 bytes 270278073 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713750 bytes 153056284 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915884 bytes 324576548 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713750 bytes 153056284 (153.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915884 bytes 324576548 (324.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669485 bytes 270279821 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669485 bytes 270279821 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713797 bytes 153067420 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915940 bytes 324586039 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669505 bytes 270281293 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669505 bytes 270281293 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713817 bytes 153072392 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 915962 bytes 324589501 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713817 bytes 153072392 (153.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 915962 bytes 324589501 (324.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669517 bytes 270282153 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669517 bytes 270282153 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713863 bytes 153082108 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916014 bytes 324598592 (324.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669581 bytes 270291988 (270.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669581 bytes 270291988 (270.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713882 bytes 153087014 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916036 bytes 324602066 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713882 bytes 153087014 (153.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916036 bytes 324602066 (324.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669593 bytes 270292848 (270.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669593 bytes 270292848 (270.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713934 bytes 153097551 (153.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916101 bytes 324612133 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669657 bytes 270303195 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669657 bytes 270303195 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713959 bytes 153103169 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916127 bytes 324616152 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 713959 bytes 153103169 (153.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916127 bytes 324616152 (324.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669691 bytes 270305343 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669691 bytes 270305343 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 713996 bytes 153112229 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916179 bytes 324625182 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669751 bytes 270314862 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669751 bytes 270314862 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714016 bytes 153117238 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916202 bytes 324628737 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714016 bytes 153117238 (153.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916202 bytes 324628737 (324.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669763 bytes 270315722 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669763 bytes 270315722 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714036 bytes 153122261 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916223 bytes 324632145 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669775 bytes 270316582 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669775 bytes 270316582 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714070 bytes 153128675 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916259 bytes 324636695 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714070 bytes 153128675 (153.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916259 bytes 324636695 (324.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669791 bytes 270318270 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669791 bytes 270318270 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714098 bytes 153135778 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916291 bytes 324642219 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669812 bytes 270319726 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669812 bytes 270319726 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714117 bytes 153140683 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916311 bytes 324645525 (324.6 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714117 bytes 153140683 (153.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916311 bytes 324645525 (324.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669826 bytes 270320706 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669826 bytes 270320706 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714155 bytes 153149618 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916357 bytes 324652966 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669846 bytes 270322198 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669846 bytes 270322198 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714175 bytes 153154633 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916378 bytes 324656393 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714175 bytes 153154633 (153.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916378 bytes 324656393 (324.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669858 bytes 270323058 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669858 bytes 270323058 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714230 bytes 153165394 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916444 bytes 324666541 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 669921 bytes 270333353 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 669921 bytes 270333353 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714256 bytes 153171039 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916474 bytes 324670630 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714256 bytes 153171039 (153.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916474 bytes 324670630 (324.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 669956 bytes 270335555 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 669956 bytes 270335555 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714291 bytes 153179985 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916523 bytes 324679520 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670011 bytes 270344714 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670011 bytes 270344714 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714312 bytes 153185111 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916546 bytes 324683086 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714312 bytes 153185111 (153.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916546 bytes 324683086 (324.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670023 bytes 270345574 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670023 bytes 270345574 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714329 bytes 153189848 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916566 bytes 324686437 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670035 bytes 270346434 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670035 bytes 270346434 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714360 bytes 153196033 (153.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916599 bytes 324690810 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714360 bytes 153196033 (153.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916599 bytes 324690810 (324.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670051 bytes 270348122 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670051 bytes 270348122 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714391 bytes 153203517 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916635 bytes 324696734 (324.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670069 bytes 270349402 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670069 bytes 270349402 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714409 bytes 153208314 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916658 bytes 324700299 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714409 bytes 153208314 (153.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916658 bytes 324700299 (324.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670082 bytes 270350324 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670082 bytes 270350324 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714431 bytes 153213462 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916683 bytes 324704001 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670102 bytes 270351740 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670102 bytes 270351740 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714452 bytes 153218539 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916706 bytes 324707529 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714452 bytes 153218539 (153.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916706 bytes 324707529 (324.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670117 bytes 270352780 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670117 bytes 270352780 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714504 bytes 153228878 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916767 bytes 324716081 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670137 bytes 270354784 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670137 bytes 270354784 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714529 bytes 153234439 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916794 bytes 324720087 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714529 bytes 153234439 (153.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916794 bytes 324720087 (324.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670169 bytes 270356812 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670169 bytes 270356812 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714555 bytes 153239833 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916816 bytes 324723534 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670183 bytes 270357792 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670183 bytes 270357792 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714577 bytes 153244962 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916840 bytes 324727143 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714577 bytes 153244962 (153.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916840 bytes 324727143 (324.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670195 bytes 270358652 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670195 bytes 270358652 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714597 bytes 153249934 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916863 bytes 324730671 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670207 bytes 270359512 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670207 bytes 270359512 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714631 bytes 153256401 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916898 bytes 324735184 (324.7 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714631 bytes 153256401 (153.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916898 bytes 324735184 (324.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670223 bytes 270361200 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670223 bytes 270361200 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714659 bytes 153263479 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916929 bytes 324740627 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670239 bytes 270362356 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670239 bytes 270362356 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714678 bytes 153268379 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916951 bytes 324744112 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714678 bytes 153268379 (153.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916951 bytes 324744112 (324.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670251 bytes 270363216 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670251 bytes 270363216 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714702 bytes 153273685 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916976 bytes 324747771 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670267 bytes 270364392 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670267 bytes 270364392 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714720 bytes 153278530 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 916997 bytes 324751214 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714720 bytes 153278530 (153.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 916997 bytes 324751214 (324.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670279 bytes 270365252 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670279 bytes 270365252 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714753 bytes 153284890 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917032 bytes 324755714 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670297 bytes 270367060 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670297 bytes 270367060 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714779 bytes 153290568 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917060 bytes 324759787 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714779 bytes 153290568 (153.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917060 bytes 324759787 (324.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670330 bytes 270369150 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670330 bytes 270369150 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714801 bytes 153295697 (153.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917083 bytes 324763330 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670348 bytes 270370370 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670348 bytes 270370370 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714838 bytes 153304472 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917129 bytes 324770706 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714838 bytes 153304472 (153.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917129 bytes 324770706 (324.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670364 bytes 270371546 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670364 bytes 270371546 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714877 bytes 153313648 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917181 bytes 324779729 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670422 bytes 270380961 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670422 bytes 270380961 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714910 bytes 153319959 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917216 bytes 324784198 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714910 bytes 153319959 (153.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917216 bytes 324784198 (324.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670438 bytes 270382649 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670438 bytes 270382649 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714956 bytes 153331153 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917276 bytes 324795172 (324.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670502 bytes 270392464 (270.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670502 bytes 270392464 (270.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 714984 bytes 153336750 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917299 bytes 324798715 (324.7 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 714984 bytes 153336750 (153.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917299 bytes 324798715 (324.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670514 bytes 270393324 (270.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670514 bytes 270393324 (270.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715022 bytes 153345888 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917353 bytes 324807914 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670577 bytes 270403107 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670577 bytes 270403107 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715041 bytes 153350751 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917374 bytes 324811295 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715041 bytes 153350751 (153.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917374 bytes 324811295 (324.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670589 bytes 270403967 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670589 bytes 270403967 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715094 bytes 153361436 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917438 bytes 324821315 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670652 bytes 270414262 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670652 bytes 270414262 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715119 bytes 153366997 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917465 bytes 324825322 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715119 bytes 153366997 (153.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917465 bytes 324825322 (324.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670681 bytes 270416110 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670681 bytes 270416110 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715139 bytes 153371957 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917487 bytes 324828784 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670698 bytes 270417270 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670698 bytes 270417270 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715159 bytes 153376980 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917509 bytes 324832258 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715159 bytes 153376980 (153.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917509 bytes 324832258 (324.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670716 bytes 270418490 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670716 bytes 270418490 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715178 bytes 153381843 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917531 bytes 324835705 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670729 bytes 270419410 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670729 bytes 270419410 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715231 bytes 153392207 (153.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917590 bytes 324844119 (324.8 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715231 bytes 153392207 (153.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917590 bytes 324844119 (324.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670749 bytes 270421414 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670749 bytes 270421414 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715281 bytes 153403810 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917650 bytes 324855138 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670810 bytes 270431073 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670810 bytes 270431073 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715300 bytes 153408710 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917672 bytes 324858623 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715300 bytes 153408710 (153.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917672 bytes 324858623 (324.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670822 bytes 270431933 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670822 bytes 270431933 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715338 bytes 153417854 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917725 bytes 324867783 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670886 bytes 270441768 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670886 bytes 270441768 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715358 bytes 153422883 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917746 bytes 324871195 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715358 bytes 153422883 (153.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917746 bytes 324871195 (324.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670898 bytes 270442628 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670898 bytes 270442628 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715408 bytes 153433300 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917812 bytes 324881310 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 670958 bytes 270452667 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 670958 bytes 270452667 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715432 bytes 153438795 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917839 bytes 324885329 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715432 bytes 153438795 (153.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917839 bytes 324885329 (324.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 670987 bytes 270454517 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 670987 bytes 270454517 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715469 bytes 153447844 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917893 bytes 324894499 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671049 bytes 270464172 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671049 bytes 270464172 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715488 bytes 153452707 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917915 bytes 324897946 (324.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715488 bytes 153452707 (153.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917915 bytes 324897946 (324.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671062 bytes 270465092 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671062 bytes 270465092 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715508 bytes 153457679 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917937 bytes 324901408 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671074 bytes 270465952 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671074 bytes 270465952 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715542 bytes 153464138 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 917973 bytes 324905970 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715542 bytes 153464138 (153.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 917973 bytes 324905970 (324.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671096 bytes 270468000 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671096 bytes 270468000 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715570 bytes 153471258 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918004 bytes 324911445 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671113 bytes 270469216 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671113 bytes 270469216 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715608 bytes 153480263 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918050 bytes 324918930 (324.9 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715608 bytes 153480263 (153.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918050 bytes 324918930 (324.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671129 bytes 270470392 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671129 bytes 270470392 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715647 bytes 153489439 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918100 bytes 324927887 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671190 bytes 270480071 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671190 bytes 270480071 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715669 bytes 153494616 (153.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918124 bytes 324931522 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715669 bytes 153494616 (153.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918124 bytes 324931522 (324.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671202 bytes 270480931 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671202 bytes 270480931 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715717 bytes 153504926 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918188 bytes 324941586 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671265 bytes 270491226 (270.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671265 bytes 270491226 (270.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715745 bytes 153510742 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918216 bytes 324945659 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715745 bytes 153510742 (153.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918216 bytes 324945659 (324.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671294 bytes 270493076 (270.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671294 bytes 270493076 (270.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715784 bytes 153519928 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918268 bytes 324954719 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671354 bytes 270502595 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671354 bytes 270502595 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715802 bytes 153524725 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918288 bytes 324958046 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715802 bytes 153524725 (153.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918288 bytes 324958046 (324.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671371 bytes 270503755 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671371 bytes 270503755 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715821 bytes 153529639 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918309 bytes 324961427 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671383 bytes 270504615 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671383 bytes 270504615 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715856 bytes 153536156 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918346 bytes 324966058 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715856 bytes 153536156 (153.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918346 bytes 324966058 (324.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671399 bytes 270506303 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671399 bytes 270506303 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715883 bytes 153543168 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918375 bytes 324971392 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671415 bytes 270507459 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671415 bytes 270507459 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715906 bytes 153548377 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918397 bytes 324974842 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715906 bytes 153548377 (153.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918397 bytes 324974842 (324.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671432 bytes 270508619 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671432 bytes 270508619 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715926 bytes 153553394 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918418 bytes 324978300 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671450 bytes 270509915 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671450 bytes 270509915 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 715963 bytes 153562169 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918463 bytes 324985613 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 715963 bytes 153562169 (153.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918463 bytes 324985613 (324.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671466 bytes 270511091 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671466 bytes 270511091 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716016 bytes 153572865 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918529 bytes 324995800 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671530 bytes 270521438 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671530 bytes 270521438 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716039 bytes 153578300 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918554 bytes 324999711 (324.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716039 bytes 153578300 (153.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918554 bytes 324999711 (324.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671559 bytes 270523286 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671559 bytes 270523286 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716073 bytes 153587075 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918604 bytes 325008660 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671616 bytes 270532649 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671616 bytes 270532649 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716093 bytes 153592055 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918626 bytes 325012107 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716093 bytes 153592055 (153.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918626 bytes 325012107 (325.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671633 bytes 270533809 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671633 bytes 270533809 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716111 bytes 153596852 (153.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918646 bytes 325015434 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671645 bytes 270534669 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671645 bytes 270534669 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716145 bytes 153603300 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918682 bytes 325020023 (325.0 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716145 bytes 153603300 (153.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918682 bytes 325020023 (325.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671661 bytes 270536357 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671661 bytes 270536357 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716175 bytes 153610716 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918716 bytes 325025809 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671679 bytes 270537637 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671679 bytes 270537637 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716192 bytes 153615375 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918741 bytes 325029469 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716192 bytes 153615375 (153.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918741 bytes 325029469 (325.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671692 bytes 270538559 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671692 bytes 270538559 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716212 bytes 153620292 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918763 bytes 325032935 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671708 bytes 270539735 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671708 bytes 270539735 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716231 bytes 153625230 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918784 bytes 325036344 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716231 bytes 153625230 (153.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918784 bytes 325036344 (325.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671725 bytes 270540895 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671725 bytes 270540895 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716265 bytes 153631650 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918820 bytes 325040894 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671743 bytes 270542703 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671743 bytes 270542703 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716311 bytes 153641440 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918874 bytes 325049065 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716311 bytes 153641440 (153.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918874 bytes 325049065 (325.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671776 bytes 270544867 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671776 bytes 270544867 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716353 bytes 153650863 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918927 bytes 325058190 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671835 bytes 270554334 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671835 bytes 270554334 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716373 bytes 153655829 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918949 bytes 325061640 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716373 bytes 153655829 (153.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 918949 bytes 325061640 (325.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671852 bytes 270555494 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671852 bytes 270555494 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716393 bytes 153660752 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 918970 bytes 325064989 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671864 bytes 270556354 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671864 bytes 270556354 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716428 bytes 153667240 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919006 bytes 325069500 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716428 bytes 153667240 (153.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919006 bytes 325069500 (325.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671880 bytes 270558042 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671880 bytes 270558042 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716455 bytes 153674343 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919037 bytes 325075026 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671896 bytes 270559198 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671896 bytes 270559198 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716476 bytes 153679363 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919058 bytes 325078414 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716476 bytes 153679363 (153.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919058 bytes 325078414 (325.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671908 bytes 270560058 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671908 bytes 270560058 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716497 bytes 153684459 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919079 bytes 325081853 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671924 bytes 270561234 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671924 bytes 270561234 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716514 bytes 153689202 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919099 bytes 325085184 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716514 bytes 153689202 (153.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919099 bytes 325085184 (325.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671932 bytes 270561786 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671932 bytes 270561786 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716547 bytes 153695555 (153.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919134 bytes 325089702 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671948 bytes 270563474 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671948 bytes 270563474 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716578 bytes 153701630 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919162 bytes 325093813 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716578 bytes 153701630 (153.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919162 bytes 325093813 (325.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 671980 bytes 270565500 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 671980 bytes 270565500 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716599 bytes 153706722 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919184 bytes 325097287 (325.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 671996 bytes 270566600 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 671996 bytes 270566600 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716616 bytes 153711387 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919205 bytes 325100668 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716616 bytes 153711387 (153.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919205 bytes 325100668 (325.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672012 bytes 270567700 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672012 bytes 270567700 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716674 bytes 153724621 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919281 bytes 325113700 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672077 bytes 270577595 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672077 bytes 270577595 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716706 bytes 153730915 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919315 bytes 325118153 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716706 bytes 153730915 (153.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919315 bytes 325118153 (325.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672093 bytes 270579283 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672093 bytes 270579283 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716754 bytes 153742322 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919378 bytes 325129274 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672155 bytes 270588994 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672155 bytes 270588994 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716776 bytes 153747508 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919402 bytes 325132883 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716776 bytes 153747508 (153.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919402 bytes 325132883 (325.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672167 bytes 270589854 (270.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672167 bytes 270589854 (270.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716823 bytes 153757228 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919455 bytes 325142017 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672230 bytes 270599637 (270.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672230 bytes 270599637 (270.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716842 bytes 153762091 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919476 bytes 325145397 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672242 bytes 270600497 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672242 bytes 270600497 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716842 bytes 153762091 (153.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919476 bytes 325145397 (325.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672242 bytes 270600497 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672242 bytes 270600497 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ethsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716882 bytes 153768918 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919512 bytes 325149919 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672258 bytes 270602185 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672258 bytes 270602185 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716906 bytes 153774419 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919537 bytes 325153872 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716906 bytes 153774419 (153.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919537 bytes 325153872 (325.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672287 bytes 270604033 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672287 bytes 270604033 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716926 bytes 153779422 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919561 bytes 325157481 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672299 bytes 270604893 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672299 bytes 270604893 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716947 bytes 153784511 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919584 bytes 325161009 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716947 bytes 153784511 (153.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919584 bytes 325161009 (325.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672311 bytes 270605753 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672311 bytes 270605753 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716966 bytes 153789417 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919606 bytes 325164483 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672334 bytes 270607273 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672334 bytes 270607273 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 716999 bytes 153795728 (153.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919641 bytes 325168952 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 716999 bytes 153795728 (153.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919641 bytes 325168952 (325.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672351 bytes 270609021 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672351 bytes 270609021 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717046 bytes 153806823 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919696 bytes 325178312 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672371 bytes 270610493 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672371 bytes 270610493 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717065 bytes 153811717 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919718 bytes 325181766 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717065 bytes 153811717 (153.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919718 bytes 325181766 (325.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672383 bytes 270611353 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672383 bytes 270611353 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717105 bytes 153820975 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919771 bytes 325190924 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672447 bytes 270621188 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672447 bytes 270621188 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717125 bytes 153825955 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919793 bytes 325194371 (325.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717125 bytes 153825955 (153.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919793 bytes 325194371 (325.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672459 bytes 270622048 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672459 bytes 270622048 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717176 bytes 153836382 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919857 bytes 325204384 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672522 bytes 270632343 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672522 bytes 270632343 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717200 bytes 153841877 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919884 bytes 325208402 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717200 bytes 153841877 (153.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919884 bytes 325208402 (325.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672551 bytes 270634191 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672551 bytes 270634191 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717238 bytes 153851054 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919934 bytes 325217376 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672612 bytes 270643762 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672612 bytes 270643762 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717259 bytes 153856110 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919957 bytes 325220940 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717259 bytes 153856110 (153.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 919957 bytes 325220940 (325.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672624 bytes 270644622 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672624 bytes 270644622 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717278 bytes 153860973 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 919978 bytes 325224321 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672641 bytes 270645782 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672641 bytes 270645782 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717315 bytes 153867630 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920016 bytes 325228979 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717315 bytes 153867630 (153.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920016 bytes 325228979 (325.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672657 bytes 270647470 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672657 bytes 270647470 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717350 bytes 153875213 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920047 bytes 325234437 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672679 bytes 270648986 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672679 bytes 270648986 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717370 bytes 153880190 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920069 bytes 325237916 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717370 bytes 153880190 (153.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920069 bytes 325237916 (325.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672692 bytes 270649906 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672692 bytes 270649906 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717409 bytes 153889191 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920114 bytes 325245265 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672712 bytes 270651398 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672712 bytes 270651398 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717427 bytes 153893988 (153.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920134 bytes 325248592 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717427 bytes 153893988 (153.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920134 bytes 325248592 (325.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672724 bytes 270652258 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672724 bytes 270652258 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717480 bytes 153904548 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920199 bytes 325258685 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672786 bytes 270662501 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672786 bytes 270662501 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717507 bytes 153910334 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920228 bytes 325262849 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717507 bytes 153910334 (153.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920228 bytes 325262849 (325.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672815 bytes 270664351 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672815 bytes 270664351 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717527 bytes 153915294 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920250 bytes 325266311 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672827 bytes 270665211 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672827 bytes 270665211 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717545 bytes 153920091 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920270 bytes 325269618 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717545 bytes 153920091 (153.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920270 bytes 325269618 (325.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672839 bytes 270666071 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672839 bytes 270666071 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717564 bytes 153925054 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920290 bytes 325272984 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672856 bytes 270667231 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672856 bytes 270667231 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717597 bytes 153931405 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920325 bytes 325277472 (325.2 MBsudo: no tty present and no askpass program specified )\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672872 bytes 270668919 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672872 bytes 270668919 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717597 bytes 153931405 (153.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920325 bytes 325277472 (325.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672872 bytes 270668919 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672872 bytes 270668919 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisisudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717624 bytes 153938408 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920354 bytes 325282807 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672888 bytes 270670075 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672888 bytes 270670075 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717642 bytes 153943253 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920372 bytes 325286018 (325.2 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717642 bytes 153943253 (153.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920372 bytes 325286018 (325.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672900 bytes 270670935 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672900 bytes 270670935 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717662 bytes 153948263 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920395 bytes 325289592 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672918 bytes 270672163 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672918 bytes 270672163 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717682 bytes 153953235 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920417 bytes 325293054 (325.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717682 bytes 153953235 (153.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920417 bytes 325293054 (325.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672931 bytes 270673083 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672931 bytes 270673083 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717737 bytes 153963960 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920480 bytes 325301811 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 672951 bytes 270675087 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 672951 bytes 270675087 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717763 bytes 153969618 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920509 bytes 325305965 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717763 bytes 153969618 (153.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920509 bytes 325305965 (325.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 672980 bytes 270676935 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 672980 bytes 270676935 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717802 bytes 153978717 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920560 bytes 325314956 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673039 bytes 270686402 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673039 bytes 270686402 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717823 bytes 153983806 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920582 bytes 325318418 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717823 bytes 153983806 (153.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920582 bytes 325318418 (325.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673051 bytes 270687262 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673051 bytes 270687262 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717843 bytes 153988760 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920604 bytes 325321890 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673066 bytes 270688302 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673066 bytes 270688302 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717876 bytes 153995071 (153.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920640 bytes 325326423 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717876 bytes 153995071 (153.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920640 bytes 325326423 (325.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673084 bytes 270690110 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673084 bytes 270690110 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717904 bytes 154002194 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920674 bytes 325332156 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673102 bytes 270691390 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673102 bytes 270691390 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717923 bytes 154007057 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920697 bytes 325335709 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717923 bytes 154007057 (154.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920697 bytes 325335709 (325.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673115 bytes 270692312 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673115 bytes 270692312 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717944 bytes 154012120 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920720 bytes 325339272 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673131 bytes 270693488 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673131 bytes 270693488 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717962 bytes 154016974 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920739 bytes 325342557 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 717962 bytes 154016974 (154.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920739 bytes 325342557 (325.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673143 bytes 270694348 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673143 bytes 270694348 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 717995 bytes 154023285 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920774 bytes 325347026 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673164 bytes 270696336 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673164 bytes 270696336 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718021 bytes 154028943 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920802 bytes 325351114 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718021 bytes 154028943 (154.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920802 bytes 325351114 (325.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673195 bytes 270698306 (270.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673195 bytes 270698306 (270.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718058 bytes 154037818 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920846 bytes 325358409 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673211 bytes 270699482 (270.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673211 bytes 270699482 (270.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718078 bytes 154042741 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920867 bytes 325361790 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718078 bytes 154042741 (154.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920867 bytes 325361790 (325.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673223 bytes 270700342 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673223 bytes 270700342 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718097 bytes 154047598 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920889 bytes 325365225 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673235 bytes 270701202 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673235 bytes 270701202 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718133 bytes 154054232 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920926 bytes 325369844 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718133 bytes 154054232 (154.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920926 bytes 325369844 (325.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673256 bytes 270703190 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673256 bytes 270703190 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718162 bytes 154061364 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920956 bytes 325375213 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673272 bytes 270704346 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673272 bytes 270704346 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718189 bytes 154066840 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 920980 bytes 325378831 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718189 bytes 154066840 (154.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 920980 bytes 325378831 (325.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673284 bytes 270705206 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673284 bytes 270705206 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718210 bytes 154071971 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921003 bytes 325382435 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673300 bytes 270706382 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673300 bytes 270706382 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718229 bytes 154076865 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921024 bytes 325385842 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718229 bytes 154076865 (154.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921024 bytes 325385842 (325.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673312 bytes 270707242 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673312 bytes 270707242 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718263 bytes 154083273 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921060 bytes 325390392 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673328 bytes 270708930 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673328 bytes 270708930 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718288 bytes 154088873 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921090 bytes 325394453 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718288 bytes 154088873 (154.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921090 bytes 325394453 (325.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673358 bytes 270710830 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673358 bytes 270710830 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718315 bytes 154094367 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921113 bytes 325398007 (325.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673374 bytes 270711930 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673374 bytes 270711930 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718334 bytes 154099230 (154.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921134 bytes 325401388 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718334 bytes 154099230 (154.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921134 bytes 325401388 (325.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673389 bytes 270712970 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673389 bytes 270712970 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718355 bytes 154104307 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921157 bytes 325404915 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673401 bytes 270713830 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673401 bytes 270713830 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718408 bytes 154114650 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921218 bytes 325413408 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718408 bytes 154114650 (154.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921218 bytes 325413408 (325.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673426 bytes 270716134 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673426 bytes 270716134 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718454 bytes 154125852 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921276 bytes 325424275 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673487 bytes 270725793 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673487 bytes 270725793 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718474 bytes 154130875 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921296 bytes 325427609 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718474 bytes 154130875 (154.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921296 bytes 325427609 (325.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673499 bytes 270726653 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673499 bytes 270726653 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718513 bytes 154140054 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921348 bytes 325436752 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673560 bytes 270736332 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673560 bytes 270736332 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718533 bytes 154145057 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921371 bytes 325440307 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718533 bytes 154145057 (154.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921371 bytes 325440307 (325.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673572 bytes 270737192 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673572 bytes 270737192 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718584 bytes 154155591 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921437 bytes 325450439 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673635 bytes 270747487 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673635 bytes 270747487 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718610 bytes 154161261 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921465 bytes 325454527 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718610 bytes 154161261 (154.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921465 bytes 325454527 (325.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673664 bytes 270749335 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673664 bytes 270749335 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718630 bytes 154166221 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921487 bytes 325457981 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673676 bytes 270750195 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673676 bytes 270750195 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718648 bytes 154171075 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921507 bytes 325461332 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718648 bytes 154171075 (154.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921507 bytes 325461332 (325.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673688 bytes 270751055 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673688 bytes 270751055 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718667 bytes 154175938 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921528 bytes 325464713 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673700 bytes 270751915 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673700 bytes 270751915 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718701 bytes 154182300 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921563 bytes 325469141 (325.4 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718701 bytes 154182300 (154.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921563 bytes 325469141 (325.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673727 bytes 270754263 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673727 bytes 270754263 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718726 bytes 154189237 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921591 bytes 325474413 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673740 bytes 270755171 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673740 bytes 270755171 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718765 bytes 154198366 (154.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921640 bytes 325482107 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718765 bytes 154198366 (154.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921640 bytes 325482107 (325.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673756 bytes 270756347 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673756 bytes 270756347 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718804 bytes 154207515 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921692 bytes 325491184 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673819 bytes 270766130 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673819 bytes 270766130 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718823 bytes 154212478 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921713 bytes 325494616 (325.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718823 bytes 154212478 (154.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921713 bytes 325494616 (325.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673831 bytes 270766990 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673831 bytes 270766990 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718873 bytes 154222931 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921777 bytes 325504725 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673894 bytes 270777285 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673894 bytes 270777285 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718898 bytes 154228486 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921807 bytes 325508798 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718898 bytes 154228486 (154.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921807 bytes 325508798 (325.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673924 bytes 270779187 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673924 bytes 270779187 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718936 bytes 154237663 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921859 bytes 325517828 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 673983 bytes 270788654 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 673983 bytes 270788654 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718954 bytes 154242460 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921879 bytes 325521155 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 718954 bytes 154242460 (154.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921879 bytes 325521155 (325.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 673995 bytes 270789514 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 673995 bytes 270789514 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 718972 bytes 154247263 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921899 bytes 325524494 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674007 bytes 270790374 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674007 bytes 270790374 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719006 bytes 154253740 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921934 bytes 325529002 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719006 bytes 154253740 (154.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921934 bytes 325529002 (325.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674025 bytes 270792182 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674025 bytes 270792182 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719033 bytes 154260752 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921963 bytes 325534336 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674044 bytes 270793518 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674044 bytes 270793518 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719053 bytes 154265712 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 921985 bytes 325537797 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719053 bytes 154265712 (154.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 921985 bytes 325537797 (325.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674062 bytes 270794738 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674062 bytes 270794738 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719075 bytes 154270941 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922009 bytes 325541449 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674079 bytes 270795974 (270.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674079 bytes 270795974 (270.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719110 bytes 154279633 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922053 bytes 325548744 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719110 bytes 154279633 (154.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922053 bytes 325548744 (325.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674095 bytes 270797150 (270.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674095 bytes 270797150 (270.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719163 bytes 154290280 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922119 bytes 325558919 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674157 bytes 270807393 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674157 bytes 270807393 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719191 bytes 154296145 (154.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922149 bytes 325563162 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719191 bytes 154296145 (154.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922149 bytes 325563162 (325.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674186 bytes 270809241 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674186 bytes 270809241 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719228 bytes 154305100 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922199 bytes 325572111 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674243 bytes 270818604 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674243 bytes 270818604 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719248 bytes 154310071 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922221 bytes 325575584 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719248 bytes 154310071 (154.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922221 bytes 325575584 (325.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674255 bytes 270819464 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674255 bytes 270819464 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719267 bytes 154314991 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922242 bytes 325578989 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674267 bytes 270820324 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674267 bytes 270820324 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719302 bytes 154321508 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922279 bytes 325583612 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719302 bytes 154321508 (154.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922279 bytes 325583612 (325.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674283 bytes 270822012 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674283 bytes 270822012 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719329 bytes 154328520 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922309 bytes 325589013 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674304 bytes 270823468 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674304 bytes 270823468 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719348 bytes 154333434 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922329 bytes 325592340 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719348 bytes 154333434 (154.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922329 bytes 325592340 (325.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674316 bytes 270824328 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674316 bytes 270824328 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719371 bytes 154338674 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922355 bytes 325596084 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674332 bytes 270825504 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674332 bytes 270825504 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719389 bytes 154343519 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922376 bytes 325599509 (325.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719389 bytes 154343519 (154.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922376 bytes 325599509 (325.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674350 bytes 270826724 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674350 bytes 270826724 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719430 bytes 154350495 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922413 bytes 325604127 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674367 bytes 270828472 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674367 bytes 270828472 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719474 bytes 154360113 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922466 bytes 325612228 (325.6 MBsudo: no tty present and no askpass program specified )\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674400 bytes 270830638 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674400 bytes 270830638 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719474 bytes 154360113 (154.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922466 bytes 325612228 (325.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674400 bytes 270830638 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674400 bytes 270830638 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisisudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719494 bytes 154365064 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922489 bytes 325615756 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674412 bytes 270831498 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674412 bytes 270831498 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719514 bytes 154370081 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922510 bytes 325619163 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719514 bytes 154370081 (154.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922510 bytes 325619163 (325.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674424 bytes 270832358 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674424 bytes 270832358 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719534 bytes 154375041 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922532 bytes 325622624 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674436 bytes 270833218 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674436 bytes 270833218 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719568 bytes 154381461 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922567 bytes 325627100 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719568 bytes 154381461 (154.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922567 bytes 325627100 (325.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674452 bytes 270834906 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674452 bytes 270834906 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719597 bytes 154388739 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922602 bytes 325632916 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674475 bytes 270836486 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674475 bytes 270836486 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719616 bytes 154393602 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922625 bytes 325636469 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719616 bytes 154393602 (154.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922625 bytes 325636469 (325.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674488 bytes 270837408 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674488 bytes 270837408 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719636 bytes 154398612 (154.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922647 bytes 325640009 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674504 bytes 270838584 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674504 bytes 270838584 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719657 bytes 154403723 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922670 bytes 325643552 (325.6 MBsudo: no tty present and no askpass program specified )\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674516 bytes 270839444 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674516 bytes 270839444 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719657 bytes 154403723 (154.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922670 bytes 325643552 (325.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674516 bytes 270839444 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674516 bytes 270839444 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisisudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719690 bytes 154410025 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922706 bytes 325648087 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674532 bytes 270841132 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674532 bytes 270841132 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719715 bytes 154415623 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922735 bytes 325652113 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719715 bytes 154415623 (154.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922735 bytes 325652113 (325.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674567 bytes 270843334 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674567 bytes 270843334 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719741 bytes 154421048 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922758 bytes 325655641 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674581 bytes 270844314 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674581 bytes 270844314 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719778 bytes 154429873 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922802 bytes 325662923 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719778 bytes 154429873 (154.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922802 bytes 325662923 (325.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674597 bytes 270845490 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674597 bytes 270845490 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719816 bytes 154438993 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922853 bytes 325671867 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674655 bytes 270854905 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674655 bytes 270854905 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719849 bytes 154445410 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922887 bytes 325676301 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719849 bytes 154445410 (154.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922887 bytes 325676301 (325.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674667 bytes 270856285 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674667 bytes 270856285 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719893 bytes 154456497 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922946 bytes 325687271 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674733 bytes 270866236 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674733 bytes 270866236 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719911 bytes 154461300 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 922966 bytes 325690610 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719911 bytes 154461300 (154.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 922966 bytes 325690610 (325.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674746 bytes 270867156 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674746 bytes 270867156 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719953 bytes 154470704 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923016 bytes 325699579 (325.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674807 bytes 270876835 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674807 bytes 270876835 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 719974 bytes 154475773 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923039 bytes 325703122 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 719974 bytes 154475773 (154.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923039 bytes 325703122 (325.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674819 bytes 270877695 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674819 bytes 270877695 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720025 bytes 154486358 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923104 bytes 325713185 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674881 bytes 270887938 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674881 bytes 270887938 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720049 bytes 154491794 (154.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923135 bytes 325717312 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720049 bytes 154491794 (154.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923135 bytes 325717312 (325.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674911 bytes 270889840 (270.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674911 bytes 270889840 (270.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720087 bytes 154500839 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923186 bytes 325726291 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 674970 bytes 270899307 (270.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 674970 bytes 270899307 (270.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720106 bytes 154505733 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923207 bytes 325729699 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720106 bytes 154505733 (154.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923207 bytes 325729699 (325.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 674986 bytes 270900407 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 674986 bytes 270900407 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720128 bytes 154510930 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923231 bytes 325733318 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675001 bytes 270901447 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675001 bytes 270901447 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720177 bytes 154521027 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923289 bytes 325741684 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720177 bytes 154521027 (154.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923289 bytes 325741684 (325.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675021 bytes 270903451 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675021 bytes 270903451 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720227 bytes 154532578 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923350 bytes 325752776 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675085 bytes 270913266 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675085 bytes 270913266 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720252 bytes 154537906 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923372 bytes 325756223 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720252 bytes 154537906 (154.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923372 bytes 325756223 (325.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675102 bytes 270914426 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675102 bytes 270914426 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720293 bytes 154547255 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923426 bytes 325765450 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675165 bytes 270924209 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675165 bytes 270924209 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720312 bytes 154552118 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923448 bytes 325768897 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720312 bytes 154552118 (154.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923448 bytes 325768897 (325.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675177 bytes 270925069 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675177 bytes 270925069 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720365 bytes 154562826 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923514 bytes 325779086 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675241 bytes 270935416 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675241 bytes 270935416 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720390 bytes 154568418 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923541 bytes 325783120 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720390 bytes 154568418 (154.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923541 bytes 325783120 (325.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675270 bytes 270937264 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675270 bytes 270937264 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720425 bytes 154577285 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923590 bytes 325791991 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675328 bytes 270946679 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675328 bytes 270946679 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720450 bytes 154582653 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923611 bytes 325795423 (325.7 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720450 bytes 154582653 (154.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923611 bytes 325795423 (325.7 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675340 bytes 270947539 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675340 bytes 270947539 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720469 bytes 154587547 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923632 bytes 325798822 (325.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675352 bytes 270948399 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675352 bytes 270948399 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720502 bytes 154593898 (154.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923668 bytes 325803395 (325.8 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720502 bytes 154593898 (154.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923668 bytes 325803395 (325.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675371 bytes 270950267 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675371 bytes 270950267 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720530 bytes 154601027 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923698 bytes 325808796 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675390 bytes 270951603 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675390 bytes 270951603 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720548 bytes 154605830 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923719 bytes 325812201 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720548 bytes 154605830 (154.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923719 bytes 325812201 (325.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675408 bytes 270952823 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675408 bytes 270952823 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720589 bytes 154614894 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923768 bytes 325819786 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675428 bytes 270954315 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675428 bytes 270954315 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720610 bytes 154619971 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923791 bytes 325823314 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720610 bytes 154619971 (154.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923791 bytes 325823314 (325.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675440 bytes 270955175 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675440 bytes 270955175 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720663 bytes 154630568 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923857 bytes 325833447 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675503 bytes 270965470 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675503 bytes 270965470 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720688 bytes 154636166 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923888 bytes 325837613 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720688 bytes 154636166 (154.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923888 bytes 325837613 (325.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675533 bytes 270967370 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675533 bytes 270967370 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720725 bytes 154645222 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923939 bytes 325846604 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675591 bytes 270976785 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675591 bytes 270976785 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720744 bytes 154650076 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923959 bytes 325849942 (325.8 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720744 bytes 154650076 (154.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 923959 bytes 325849942 (325.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675603 bytes 270977645 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675603 bytes 270977645 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720764 bytes 154655036 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 923981 bytes 325853396 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675615 bytes 270978505 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675615 bytes 270978505 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720798 bytes 154661449 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924017 bytes 325857919 (325.8 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720798 bytes 154661449 (154.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924017 bytes 325857919 (325.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675631 bytes 270980193 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675631 bytes 270980193 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720827 bytes 154668630 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924048 bytes 325863377 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675647 bytes 270981349 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675647 bytes 270981349 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720847 bytes 154673584 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924070 bytes 325866826 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720847 bytes 154673584 (154.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924070 bytes 325866826 (325.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675663 bytes 270982449 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675663 bytes 270982449 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720867 bytes 154678608 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924098 bytes 325870738 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675685 bytes 270983985 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675685 bytes 270983985 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720886 bytes 154683465 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924124 bytes 325874501 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720886 bytes 154683465 (154.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924124 bytes 325874501 (325.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675702 bytes 270985221 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675702 bytes 270985221 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720940 bytes 154693967 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924190 bytes 325883450 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675726 bytes 270987541 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675726 bytes 270987541 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 720967 bytes 154699754 (154.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924224 bytes 325888006 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 720967 bytes 154699754 (154.6 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924224 bytes 325888006 (325.8 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675759 bytes 270989703 (270.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675759 bytes 270989703 (270.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721009 bytes 154709120 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924283 bytes 325897502 (325.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675822 bytes 270999486 (270.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675822 bytes 270999486 (270.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721030 bytes 154714152 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924311 bytes 325901400 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721030 bytes 154714152 (154.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924311 bytes 325901400 (325.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675838 bytes 271000662 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675838 bytes 271000662 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721049 bytes 154719066 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924337 bytes 325905151 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675850 bytes 271001530 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675850 bytes 271001530 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721083 bytes 154725510 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924380 bytes 325910248 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721083 bytes 154725510 (154.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924380 bytes 325910248 (325.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675870 bytes 271003534 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675870 bytes 271003534 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721110 bytes 154732510 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924416 bytes 325916081 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675890 bytes 271005006 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675890 bytes 271005006 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721131 bytes 154737550 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924444 bytes 325919972 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721131 bytes 154737550 (154.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924444 bytes 325919972 (325.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675910 bytes 271006422 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675910 bytes 271006422 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721151 bytes 154742516 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924471 bytes 325923824 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675932 bytes 271007958 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675932 bytes 271007958 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721177 bytes 154747853 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924498 bytes 325927649 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721177 bytes 154747853 (154.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924498 bytes 325927649 (325.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 675948 bytes 271009134 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 675948 bytes 271009134 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721213 bytes 154754468 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924540 bytes 325932683 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 675974 bytes 271011498 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 675974 bytes 271011498 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721238 bytes 154760068 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924573 bytes 325937202 (325.9 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721238 bytes 154760068 (154.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924573 bytes 325937202 (325.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676008 bytes 271013724 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676008 bytes 271013724 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721277 bytes 154769100 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924625 bytes 325945094 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676028 bytes 271015216 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676028 bytes 271015216 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721298 bytes 154774189 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924652 bytes 325948958 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721298 bytes 154774189 (154.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924652 bytes 325948958 (325.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676044 bytes 271016392 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676044 bytes 271016392 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721317 bytes 154779046 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924679 bytes 325952795 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676060 bytes 271017568 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676060 bytes 271017568 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721351 bytes 154785417 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924719 bytes 325957634 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721351 bytes 154785417 (154.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924719 bytes 325957634 (325.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676080 bytes 271019572 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676080 bytes 271019572 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721384 bytes 154792913 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924761 bytes 325963947 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676102 bytes 271021168 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676102 bytes 271021168 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721404 bytes 154797867 (154.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924790 bytes 325967972 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721404 bytes 154797867 (154.7 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924790 bytes 325967972 (325.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676119 bytes 271022406 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676119 bytes 271022406 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721424 bytes 154802839 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924817 bytes 325971829 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676145 bytes 271024182 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676145 bytes 271024182 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721445 bytes 154807879 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924845 bytes 325975720 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721445 bytes 154807879 (154.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924845 bytes 325975720 (325.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676161 bytes 271025358 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676161 bytes 271025358 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721478 bytes 154814221 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924884 bytes 325980513 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676177 bytes 271027046 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676177 bytes 271027046 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721503 bytes 154819776 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924916 bytes 325984911 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721503 bytes 154819776 (154.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924916 bytes 325984911 (325.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676210 bytes 271029210 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676210 bytes 271029210 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721524 bytes 154824816 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924944 bytes 325988803 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676231 bytes 271030686 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676231 bytes 271030686 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721543 bytes 154829722 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 924969 bytes 325992540 (325.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721543 bytes 154829722 (154.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 924969 bytes 325992540 (325.9 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676249 bytes 271031982 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676249 bytes 271031982 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721583 bytes 154838726 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925023 bytes 326000496 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676269 bytes 271033474 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676269 bytes 271033474 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721618 bytes 154845214 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925064 bytes 326005410 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721618 bytes 154845214 (154.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925064 bytes 326005410 (326.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676289 bytes 271035478 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676289 bytes 271035478 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721666 bytes 154856609 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925131 bytes 326016911 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676356 bytes 271045557 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676356 bytes 271045557 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721687 bytes 154861629 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925159 bytes 326020817 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721687 bytes 154861629 (154.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925159 bytes 326020817 (326.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676372 bytes 271046733 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676372 bytes 271046733 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721726 bytes 154870835 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925218 bytes 326030339 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676444 bytes 271057048 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676444 bytes 271057048 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721746 bytes 154875808 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925246 bytes 326034276 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721746 bytes 154875808 (154.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925246 bytes 326034276 (326.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676462 bytes 271058344 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676462 bytes 271058344 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721796 bytes 154886224 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925316 bytes 326044772 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676529 bytes 271068955 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676529 bytes 271068955 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721824 bytes 154892059 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925350 bytes 326049305 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721824 bytes 154892059 (154.8 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925350 bytes 326049305 (326.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676562 bytes 271071119 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676562 bytes 271071119 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721843 bytes 154896916 (154.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925376 bytes 326053069 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676578 bytes 271072295 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676578 bytes 271072295 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721862 bytes 154901779 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925402 bytes 326056853 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721862 bytes 154901779 (154.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925402 bytes 326056853 (326.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676594 bytes 271073471 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676594 bytes 271073471 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721882 bytes 154906753 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925429 bytes 326060691 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676615 bytes 271074947 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676615 bytes 271074947 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721919 bytes 154913438 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925474 bytes 326065925 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721919 bytes 154913438 (154.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925474 bytes 326065925 (326.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676637 bytes 271077071 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676637 bytes 271077071 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721967 bytes 154924598 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925535 bytes 326075776 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676661 bytes 271078859 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676661 bytes 271078859 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 721988 bytes 154929638 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925563 bytes 326079668 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 721988 bytes 154929638 (154.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925563 bytes 326079668 (326.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676677 bytes 271080035 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676677 bytes 271080035 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722029 bytes 154938920 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925619 bytes 326089056 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676743 bytes 271090014 (271.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676743 bytes 271090014 (271.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722055 bytes 154944257 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925645 bytes 326092808 (326.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722055 bytes 154944257 (154.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925645 bytes 326092808 (326.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676764 bytes 271091490 (271.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676764 bytes 271091490 (271.0 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722108 bytes 154954967 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925716 bytes 326103353 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676829 bytes 271101997 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676829 bytes 271101997 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722140 bytes 154961050 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925750 bytes 326107915 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722140 bytes 154961050 (154.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925750 bytes 326107915 (326.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676862 bytes 271104163 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676862 bytes 271104163 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722178 bytes 154970114 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925805 bytes 326117218 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676919 bytes 271113534 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676919 bytes 271113534 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722199 bytes 154975197 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925833 bytes 326121137 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722199 bytes 154975197 (154.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925833 bytes 326121137 (326.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676935 bytes 271114710 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676935 bytes 271114710 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722221 bytes 154980276 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925862 bytes 326125119 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676951 bytes 271115886 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676951 bytes 271115886 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722255 bytes 154986684 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925903 bytes 326130072 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722255 bytes 154986684 (154.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925903 bytes 326130072 (326.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 676971 bytes 271117890 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 676971 bytes 271117890 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722285 bytes 154993933 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925939 bytes 326135894 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 676995 bytes 271119602 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 676995 bytes 271119602 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722306 bytes 154999014 (154.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925968 bytes 326139884 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722306 bytes 154999014 (154.9 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 925968 bytes 326139884 (326.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677014 bytes 271120958 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677014 bytes 271120958 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722328 bytes 155004143 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 925998 bytes 326143938 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677034 bytes 271122374 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677034 bytes 271122374 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722367 bytes 155013095 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926048 bytes 326151630 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722367 bytes 155013095 (155.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926048 bytes 326151630 (326.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677060 bytes 271124226 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677060 bytes 271124226 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722419 bytes 155023588 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926119 bytes 326162165 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677128 bytes 271134889 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677128 bytes 271134889 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722444 bytes 155029143 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926152 bytes 326166629 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722444 bytes 155029143 (155.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926152 bytes 326166629 (326.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677161 bytes 271137053 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677161 bytes 271137053 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722484 bytes 155038446 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926211 bytes 326176200 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677224 bytes 271146836 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677224 bytes 271146836 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722504 bytes 155043418 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926239 bytes 326180131 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722504 bytes 155043418 (155.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926239 bytes 326180131 (326.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677240 bytes 271148012 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677240 bytes 271148012 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722523 bytes 155048275 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926265 bytes 326183883 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677256 bytes 271149188 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677256 bytes 271149188 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722557 bytes 155054746 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926306 bytes 326188848 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722557 bytes 155054746 (155.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926306 bytes 326188848 (326.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677276 bytes 271151192 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677276 bytes 271151192 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722586 bytes 155061878 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926342 bytes 326194670 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677296 bytes 271152664 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677296 bytes 271152664 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722606 bytes 155066875 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926369 bytes 326198530 (326.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722606 bytes 155066875 (155.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926369 bytes 326198530 (326.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677312 bytes 271153840 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677312 bytes 271153840 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722627 bytes 155071921 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926394 bytes 326202228 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677328 bytes 271155016 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677328 bytes 271155016 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722647 bytes 155076979 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926421 bytes 326206099 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722647 bytes 155076979 (155.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926421 bytes 326206099 (326.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677356 bytes 271156836 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677356 bytes 271156836 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722681 bytes 155083406 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926463 bytes 326211137 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677377 bytes 271158900 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677377 bytes 271158900 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722726 bytes 155093044 (155.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926524 bytes 326219648 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722726 bytes 155093044 (155.0 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926524 bytes 326219648 (326.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677415 bytes 271161432 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677415 bytes 271161432 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722765 bytes 155102149 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926579 bytes 326228956 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677479 bytes 271171267 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677479 bytes 271171267 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722786 bytes 155107268 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926609 bytes 326233068 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722786 bytes 155107268 (155.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926609 bytes 326233068 (326.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677495 bytes 271172443 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677495 bytes 271172443 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722806 bytes 155112242 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926636 bytes 326236906 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677511 bytes 271173619 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677511 bytes 271173619 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722840 bytes 155118613 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926678 bytes 326241886 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722840 bytes 155118613 (155.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926678 bytes 326241886 (326.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677531 bytes 271175623 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677531 bytes 271175623 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722870 bytes 155125853 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926716 bytes 326247866 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677551 bytes 271177095 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677551 bytes 271177095 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722891 bytes 155130936 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926744 bytes 326251773 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677567 bytes 271178271 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677567 bytes 271178271 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722891 bytes 155130936 (155.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926744 bytes 326251773 (326.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677567 bytes 271178271 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677567 bytes 271178271 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ethsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722912 bytes 155135947 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926772 bytes 326255680 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677583 bytes 271179447 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677583 bytes 271179447 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722933 bytes 155141052 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926801 bytes 326259699 (326.2 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722933 bytes 155141052 (155.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926801 bytes 326259699 (326.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677606 bytes 271181043 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677606 bytes 271181043 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722968 bytes 155147540 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926843 bytes 326264679 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677629 bytes 271183227 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677629 bytes 271183227 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 722995 bytes 155153287 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926878 bytes 326269143 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 722995 bytes 155153287 (155.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926878 bytes 326269143 (326.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677669 bytes 271185805 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677669 bytes 271185805 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723014 bytes 155158169 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926906 bytes 326273074 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677686 bytes 271187041 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677686 bytes 271187041 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723053 bytes 155167271 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 926958 bytes 326280999 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723053 bytes 155167271 (155.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 926958 bytes 326280999 (326.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677706 bytes 271188533 (271.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677706 bytes 271188533 (271.1 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723090 bytes 155176307 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927014 bytes 326290407 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677768 bytes 271198264 (271.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677768 bytes 271198264 (271.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723123 bytes 155182618 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927055 bytes 326295345 (326.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723123 bytes 155182618 (155.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 927055 bytes 326295345 (326.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677788 bytes 271200268 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677788 bytes 271200268 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723173 bytes 155194276 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927127 bytes 326307258 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677858 bytes 271210523 (271.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677858 bytes 271210523 (271.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723191 bytes 155199001 (155.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927154 bytes 326311108 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723191 bytes 155199001 (155.1 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 927154 bytes 326311108 (326.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677875 bytes 271211761 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677875 bytes 271211761 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723230 bytes 155208229 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927214 bytes 326320769 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 677938 bytes 271221544 (271.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 677938 bytes 271221544 (271.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723252 bytes 155213366 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927243 bytes 326324742 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723252 bytes 155213366 (155.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 927243 bytes 326324742 (326.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 677959 bytes 271223020 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 677959 bytes 271223020 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723303 bytes 155223769 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927312 bytes 326335126 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678030 bytes 271233879 (271.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678030 bytes 271233879 (271.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723332 bytes 155229736 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927346 bytes 326339658 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723332 bytes 155229736 (155.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 927346 bytes 326339658 (326.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678063 bytes 271236045 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678063 bytes 271236045 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723347 bytes 155234269 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927371 bytes 326343348 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678075 bytes 271236913 (271.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678075 bytes 271236913 (271.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723367 bytes 155239235 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927400 bytes 326347320 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723367 bytes 155239235 (155.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 927400 bytes 326347320 (326.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678097 bytes 271238449 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678097 bytes 271238449 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723387 bytes 155244158 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927427 bytes 326351145 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678114 bytes 271239685 (271.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678114 bytes 271239685 (271.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723440 bytes 155254558 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927493 bytes 326360066 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723440 bytes 155254558 (155.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 927493 bytes 326360066 (326.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678138 bytes 271242005 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678138 bytes 271242005 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723487 bytes 155265869 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927559 bytes 326371513 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678204 bytes 271252032 (271.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678204 bytes 271252032 (271.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723515 bytes 155271412 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927588 bytes 326375493 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723515 bytes 155271412 (155.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 927588 bytes 326375493 (326.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678220 bytes 271253208 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678220 bytes 271253208 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723554 bytes 155280667 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927647 bytes 326385064 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678284 bytes 271263043 (271.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678284 bytes 271263043 (271.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723573 bytes 155285530 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927674 bytes 326388914 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723573 bytes 155285530 (155.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 927674 bytes 326388914 (326.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678303 bytes 271264399 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678303 bytes 271264399 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723626 bytes 155296121 (155.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927746 bytes 326399480 (326.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678377 bytes 271275430 (271.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678377 bytes 271275430 (271.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723653 bytes 155301890 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927780 bytes 326404025 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723653 bytes 155301890 (155.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 927780 bytes 326404025 (326.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678410 bytes 271277596 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678410 bytes 271277596 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723691 bytes 155310973 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927837 bytes 326413441 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678473 bytes 271287379 (271.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678473 bytes 271287379 (271.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723712 bytes 155316055 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927866 bytes 326417448 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723712 bytes 155316055 (155.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 927866 bytes 326417448 (326.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678489 bytes 271288555 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678489 bytes 271288555 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723734 bytes 155321192 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927894 bytes 326421355 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678505 bytes 271289731 (271.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678505 bytes 271289731 (271.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723770 bytes 155327720 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927937 bytes 326426384 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723770 bytes 155327720 (155.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 927937 bytes 326426384 (326.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678530 bytes 271292035 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678530 bytes 271292035 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723800 bytes 155334912 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 927973 bytes 326432198 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678552 bytes 271293627 (271.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678552 bytes 271293627 (271.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723840 bytes 155343990 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928023 bytes 326439929 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723840 bytes 155343990 (155.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928023 bytes 326439929 (326.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678568 bytes 271294803 (271.2 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678568 bytes 271294803 (271.2 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723880 bytes 155353218 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928080 bytes 326449404 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678630 bytes 271304534 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678630 bytes 271304534 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723901 bytes 155358238 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928109 bytes 326453365 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723901 bytes 155358238 (155.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928109 bytes 326453365 (326.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678646 bytes 271305710 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678646 bytes 271305710 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723956 bytes 155369060 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928181 bytes 326463996 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678722 bytes 271316861 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678722 bytes 271316861 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 723985 bytes 155374941 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928219 bytes 326468644 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 723985 bytes 155374941 (155.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928219 bytes 326468644 (326.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678757 bytes 271319139 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678757 bytes 271319139 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724007 bytes 155380021 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928247 bytes 326472551 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678773 bytes 271320315 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678773 bytes 271320315 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724029 bytes 155385175 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928276 bytes 326476540 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724029 bytes 155385175 (155.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928276 bytes 326476540 (326.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678789 bytes 271321491 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678789 bytes 271321491 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724049 bytes 155390098 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928304 bytes 326480431 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678805 bytes 271322667 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678805 bytes 271322667 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724083 bytes 155396469 (155.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928345 bytes 326485345 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724083 bytes 155396469 (155.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928345 bytes 326485345 (326.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678825 bytes 271324671 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678825 bytes 271324671 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724114 bytes 155403778 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928382 bytes 326491209 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678845 bytes 271326143 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678845 bytes 271326143 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724137 bytes 155409059 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928413 bytes 326495349 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724137 bytes 155409059 (155.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928413 bytes 326495349 (326.4 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678865 bytes 271327559 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678865 bytes 271327559 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724158 bytes 155414042 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928442 bytes 326499283 (326.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678884 bytes 271328915 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678884 bytes 271328915 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724200 bytes 155423230 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928497 bytes 326507300 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724200 bytes 155423230 (155.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928497 bytes 326507300 (326.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 678904 bytes 271330407 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 678904 bytes 271330407 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724253 bytes 155433820 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928570 bytes 326517959 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 678977 bytes 271341370 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 678977 bytes 271341370 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724284 bytes 155439962 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928604 bytes 326522498 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724284 bytes 155439962 (155.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928604 bytes 326522498 (326.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 679015 bytes 271343836 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 679015 bytes 271343836 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724321 bytes 155448937 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928661 bytes 326531958 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 679079 bytes 271353671 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 679079 bytes 271353671 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724341 bytes 155453860 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928688 bytes 326535784 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724341 bytes 155453860 (155.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928688 bytes 326535784 (326.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 679095 bytes 271354847 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 679095 bytes 271354847 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724360 bytes 155458717 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928715 bytes 326539610 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 679111 bytes 271356023 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 679111 bytes 271356023 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724395 bytes 155465248 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928757 bytes 326544616 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724395 bytes 155465248 (155.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928757 bytes 326544616 (326.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 679131 bytes 271358027 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 679131 bytes 271358027 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724424 bytes 155472411 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928792 bytes 326550370 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 679151 bytes 271359499 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 679151 bytes 271359499 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724445 bytes 155477394 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928821 bytes 326554304 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724445 bytes 155477394 (155.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928821 bytes 326554304 (326.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 679167 bytes 271360675 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 679167 bytes 271360675 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724467 bytes 155482494 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928849 bytes 326558164 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 679183 bytes 271361851 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 679183 bytes 271361851 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724488 bytes 155487477 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928877 bytes 326562032 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724488 bytes 155487477 (155.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928877 bytes 326562032 (326.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 679201 bytes 271363147 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 679201 bytes 271363147 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724524 bytes 155494054 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928919 bytes 326567034 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 679230 bytes 271365691 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 679230 bytes 271365691 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok b'Error on request' Token 85213b338a7900a79945692114f14db2 is maybe invalid --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724553 bytes 155499983 (155.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 928958 bytes 326571748 (326.5 MBsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724553 bytes 155499983 (155.4 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 928958 bytes 326571748 (326.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 679266 bytes 271367961 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 679266 bytes 271367961 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724597 bytes 155509232 (155.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 929009 bytes 326579503 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 679286 bytes 271369453 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 679286 bytes 271369453 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724616 bytes 155514139 (155.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 929037 bytes 326583440 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724616 bytes 155514139 (155.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 929037 bytes 326583440 (326.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 679302 bytes 271370629 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 679302 bytes 271370629 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724637 bytes 155519210 (155.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 929064 bytes 326587293 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 679318 bytes 271371805 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 679318 bytes 271371805 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724671 bytes 155525581 (155.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 929105 bytes 326592207 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724671 bytes 155525581 (155.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 929105 bytes 326592207 (326.5 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 679338 bytes 271373809 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 679338 bytes 271373809 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724700 bytes 155532755 (155.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 929141 bytes 326598047 (326.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 679358 bytes 271375281 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 679358 bytes 271375281 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724723 bytes 155537995 (155.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 929171 bytes 326602077 (326.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724723 bytes 155537995 (155.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 929171 bytes 326602077 (326.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 679374 bytes 271376457 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 679374 bytes 271376457 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724743 bytes 155542918 (155.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 929199 bytes 326605969 (326.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 679390 bytes 271377633 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 679390 bytes 271377633 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724764 bytes 155547901 (155.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 929228 bytes 326609903 (326.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n sudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 315, in get_info_from_sqlite network_traffic = network_traffic_monitor (verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 237, in network_traffic_monitor a = subprocess_cmd(command="/sbin/ifconfig", timeout=5, verbose=True) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 172, in subprocess_cmd logger.info("outs: "+str(outs)) Message: "outs: b'docker0: flags=4099 mtu 1500\\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\neth0: flags=4163 mtu 1500\\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\\n RX packets 724764 bytes 155547901 (155.5 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 929228 bytes 326609903 (326.6 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n device interrupt 151 base 0xd000 \\n\\nlo: flags=73 mtu 65536\\n inet 127.0.0.1 netmask 255.0.0.0\\n inet6 ::1 prefixlen 128 scopeid 0x10\\n loop txqueuelen 1 (Local Loopback)\\n RX packets 679406 bytes 271378809 (271.3 MB)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 679406 bytes 271378809 (271.3 MB)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nrndis0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\nusb0: flags=4099 mtu 1500\\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\\n RX packets 0 bytes 0 (0.0 B)\\n RX errors 0 dropped 0 overruns 0 frame 0\\n TX packets 0 bytes 0 (0.0 B)\\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\\n\\n'" Arguments: () --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose) File "/home/nano/workarea/gitsudo: no tty present and no askpass program specified --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.6/logging/__init__.py", line 998, in emit self.flush() File "/usr/lib/python3.6/logging/__init__.py", line 978, in flush self.stream.flush() OSError: [Errno 28] No space left on device Call stack: File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 74, in getAllInfosJetson logger.info ('First part ok') Message: 'First part ok' Arguments: () erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/08102025/counter_photo' nb taken pictures : 0 outs: b'docker0: flags=4099 mtu 1500\n inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255\n ether 02:42:66:dd:9e:f6 txqueuelen 0 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\neth0: flags=4163 mtu 1500\n inet 192.168.70.14 netmask 255.255.255.0 broadcast 192.168.70.255\n inet6 fe80::4d89:8abb:58b8:91c3 prefixlen 64 scopeid 0x20\n ether 48:b0:2d:8e:fc:00 txqueuelen 1000 (Ethernet)\n RX packets 724807 bytes 155554972 (155.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 929271 bytes 326614940 (326.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 151 base 0xd000 \n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 679428 bytes 271380933 (271.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 679428 bytes 271380933 (271.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3d txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether 02:4b:7e:23:33:3f txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/10/08/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.70.14-172.17.0 First part ok