erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 123  bytes 20544 (20.5 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 164  bytes 20884 (20.8 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 303  bytes 22925 (22.9 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 303  bytes 22925 (22.9 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 194  bytes 33483 (33.4 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 206  bytes 26709 (26.7 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 639  bytes 49669 (49.6 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 639  bytes 49669 (49.6 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 326  bytes 57057 (57.0 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 279  bytes 37933 (37.9 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 1279  bytes 111160 (111.1 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 1279  bytes 111160 (111.1 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 443  bytes 77136 (77.1 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 355  bytes 49219 (49.2 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 1760  bytes 158982 (158.9 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 1760  bytes 158982 (158.9 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 605  bytes 102654 (102.6 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 419  bytes 59297 (59.2 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2202  bytes 203454 (203.4 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2202  bytes 203454 (203.4 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 850  bytes 147571 (147.5 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 569  bytes 84818 (84.8 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2459  bytes 241099 (241.0 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2459  bytes 241099 (241.0 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 1063  bytes 191333 (191.3 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 722  bytes 110878 (110.8 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 3027  bytes 304766 (304.7 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3027  bytes 304766 (304.7 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 1216  bytes 221737 (221.7 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 784  bytes 120897 (120.8 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 3090  bytes 313607 (313.6 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3090  bytes 313607 (313.6 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 1406  bytes 251901 (251.9 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 871  bytes 133202 (133.2 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 3360  bytes 340710 (340.7 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3360  bytes 340710 (340.7 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 1673  bytes 304311 (304.3 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 1113  bytes 176745 (176.7 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 3928  bytes 422112 (422.1 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3928  bytes 422112 (422.1 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 1991  bytes 366802 (366.8 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 1410  bytes 228603 (228.6 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 4523  bytes 507285 (507.2 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4523  bytes 507285 (507.2 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 2132  bytes 392047 (392.0 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 1511  bytes 243973 (243.9 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 4985  bytes 552904 (552.9 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4985  bytes 552904 (552.9 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 2318  bytes 420668 (420.6 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 1575  bytes 254111 (254.1 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5298  bytes 586276 (586.2 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5298  bytes 586276 (586.2 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 3180  bytes 504606 (504.6 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2658  bytes 373770 (373.7 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5371  bytes 596349 (596.3 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5371  bytes 596349 (596.3 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 9315  bytes 7984042 (7.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4390  bytes 655121 (655.1 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5632  bytes 621438 (621.4 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5632  bytes 621438 (621.4 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.1.96-2a01:cb08
First part ok
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 9754  bytes 8058238 (8.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4706  bytes 702821 (702.8 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5942  bytes 654850 (654.8 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5942  bytes 654850 (654.8 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
First part ok
--- Logging error ---
Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 275, in get_info_from_sqlite
    with open(counter_photo) as f:
FileNotFoundError: [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson
    nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 278, in get_info_from_sqlite
    logger.info("erreur : ", str(e))
Message: 'erreur : '
Arguments: ("[Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'",)
--- Logging error ---
Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 59, in getAllInfosJetson
    logger.info('ip: ', ip[:22])
Message: 'ip: '
Arguments: ('192.168.1.96-2a01:cb08',)
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 9855  bytes 8076453 (8.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4781  bytes 713907 (713.9 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 6169  bytes 677427 (677.4 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 6169  bytes 677427 (677.4 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
First part ok
--- Logging error ---
Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 275, in get_info_from_sqlite
    with open(counter_photo) as f:
FileNotFoundError: [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson
    nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 278, in get_info_from_sqlite
    logger.info("erreur : ", str(e))
Message: 'erreur : '
Arguments: ("[Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'",)
--- Logging error ---
Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 59, in getAllInfosJetson
    logger.info('ip: ', ip[:22])
Message: 'ip: '
Arguments: ('192.168.1.96-2a01:cb08',)
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 10034  bytes 8118672 (8.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4877  bytes 728795 (728.7 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 6490  bytes 711408 (711.4 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 6490  bytes 711408 (711.4 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
First part ok
--- Logging error ---
Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 275, in get_info_from_sqlite
    with open(counter_photo) as f:
FileNotFoundError: [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson
    nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 278, in get_info_from_sqlite
    logger.info("erreur : ", str(e))
Message: 'erreur : '
Arguments: ("[Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'",)
--- Logging error ---
Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 59, in getAllInfosJetson
    logger.info('ip: ', ip[:22])
Message: 'ip: '
Arguments: ('192.168.1.96-2a01:cb08',)
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 10155  bytes 8139372 (8.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4949  bytes 739541 (739.5 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 6557  bytes 721087 (721.0 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 6557  bytes 721087 (721.0 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
First part ok
--- Logging error ---
Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 275, in get_info_from_sqlite
    with open(counter_photo) as f:
FileNotFoundError: [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson
    nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 278, in get_info_from_sqlite
    logger.info("erreur : ", str(e))
Message: 'erreur : '
Arguments: ("[Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'",)
--- Logging error ---
Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 59, in getAllInfosJetson
    logger.info('ip: ', ip[:22])
Message: 'ip: '
Arguments: ('192.168.1.96-2a01:cb08',)
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 10262  bytes 8158482 (8.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5011  bytes 749501 (749.5 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 6611  bytes 729272 (729.2 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 6611  bytes 729272 (729.2 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
First part ok
--- Logging error ---
Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 275, in get_info_from_sqlite
    with open(counter_photo) as f:
FileNotFoundError: [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson
    nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 278, in get_info_from_sqlite
    logger.info("erreur : ", str(e))
Message: 'erreur : '
Arguments: ("[Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'",)
--- Logging error ---
Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 59, in getAllInfosJetson
    logger.info('ip: ', ip[:22])
Message: 'ip: '
Arguments: ('192.168.1.96-2a01:cb08',)
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        inet6 2a01:cb08:10ab:e000:38d4:109d:6803:85ce  prefixlen 64  scopeid 0x0<global>\n        inet6 2a01:cb08:10ab:e000:a179:6fa1:fe5c:d4e3  prefixlen 64  scopeid 0x0<global>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 10420  bytes 8188008 (8.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5105  bytes 762484 (762.4 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 6883  bytes 756165 (756.1 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 6883  bytes 756165 (756.1 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
First part ok
--- Logging error ---
Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 275, in get_info_from_sqlite
    with open(counter_photo) as f:
FileNotFoundError: [Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 40, in getAllInfosJetson
    nbr_pic_colors = get_info_from_sqlite(timeout,date,verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 278, in get_info_from_sqlite
    logger.info("erreur : ", str(e))
Message: 'erreur : '
Arguments: ("[Errno 2] No such file or directory: '/home/nano/.fotonower_config/21072026/counter_photo'",)
--- Logging error ---
Traceback (most recent call last):
  File "/usr/lib/python3.6/logging/__init__.py", line 994, in emit
    msg = self.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 840, in format
    return fmt.format(record)
  File "/usr/lib/python3.6/logging/__init__.py", line 577, in format
    record.message = record.getMessage()
  File "/usr/lib/python3.6/logging/__init__.py", line 338, in getMessage
    msg = msg % self.args
TypeError: not all arguments converted during string formatting
Call stack:
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 403, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 59, in getAllInfosJetson
    logger.info('ip: ', ip[:22])
Message: 'ip: '
Arguments: ('192.168.1.96-2a01:cb08',)
 nb taken pictures : 0
outs: b'eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.1.96  netmask 255.255.255.0  broadcast 192.168.1.255\n        inet6 fe80::8811:6cd1:5d6a:c87b  prefixlen 64  scopeid 0x20<link>\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 17  bytes 7299 (7.2 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 24  bytes 3052 (3.0 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 592  bytes 44604 (44.6 KB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 592  bytes 44604 (44.6 KB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2026/07/21/classify/new_classify.txt does not exist. All values set to 0.
First part ok
